PRINT
Large Spine holder including Spine lg holder insert and navigations pin for large lumbar spine L1-Sacrum
CHF 1'101.90
PR1608.40
Orientation neutral Model Type intact Dimensions Length: 294mm. Width: 204mm. Height: 170mm Material Various material Delivery Ready to ship within 30 working days
PRINT
SYNBONE foam block series 30 PCF in defined dimensions
CHF 13.20
0040-30-10
Orientation neutral Model Type intact Dimensions 55mm x 45mm x 45mm, Tolerances: +/-1.2mm Material PUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
SYNBONE foam block series 15 PCF in defined dimensions with a horizontal cut
CHF 18.30
0040-15-12
Orientation neutral Model Type intact Dimensions 110mm x 40mm x 40mm, Cut Length: 70mm, Tolerances: +/-1.2mm Material PUR /materials properties: Density: 15 PCF / 0.24 g/cm3 (ISO 1183), Compressive strength:2-4 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
SYNBONE foam block series 30 PCF in defined dimensions
CHF 19.15
0040-30-01
Orientation neutral Model Type intact Dimensions 110mm x 110mm x 40mm Tolerances +/-1.2mm Material PUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
SYNBONE foam block series 50 PCF in defined dimensions
CHF 20.05
0040-50-10
Orientation neutral Model Type intact Dimensions 100mm x 100mm x 5mm, Tolerances: +/-1.2mm Material PUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
SYNBONE foam block series 30 PCF in defined dimensions
CHF 24.65
0040-30-02
Orientation neutral Model Type intact Dimensions 150mm x 100mm x 50mm Tolerances +/-1.2mm Material PUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
Lumbar Spine from T10 to Sacrum. Muscles not included
CHF 124.70
LD9370
Orientation neutral Model Type intact Dimensions Overall length: 420mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
SYNBONE foam block series 5 PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 26.70
0040-5-50-02
Orientation neutral Model Type intact Dimensions 150mm x 100mm x 53mm, Tolerances: +/-1.2mm Material PUR/materials properties: Density: 5 PCF / 0.08 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 0.7 MPa; 40-45 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
SYNBONE foam block series 8.7 PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 28.90
0040-8.7-50-02
Orientation neutral Model Type intact Dimensions 150mm x 100mm x 53mm, Tolerances: +/-1.2mm Material PUR/materials properties: Density: 8.7 PCF / 0.14 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 1.8-2 MPa; 40-45 MPa (ISO 604) Delivery Ready to ship within 25 working days
PRINT
Partial hollow Skull left side with vise attachment, frontal sinus and maxillary sinuses
CHF 30.35
8800.L
Orientation left Model Type intact Dimensions Skull width: 74mm. Length: 235mm. Height: 161mm Material Solid foam Delivery Ready to ship within 15 working days
PRINT
Partial hollow Skull right side with vise attachment, frontal sinus and maxillary sinuses
CHF 30.35
8800.R
Orientation right Model Type intact Dimensions Skull width: 74mm. Length: 235mm. Height: 161mm Material Solid foam Delivery Ready to ship within 15 working days
PRINT
SYNBONE foam block series 15PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 33.10
0040-15-50-02
Orientation neutral Model Type intact Dimensions 150mm x 100mm x 53mm, Tolerances: +/-1.2mm Material PUR/materials properties: Density: 15 PCF / 0.24 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 2-4 MPa; 40-45 MPa (ISO 604) Delivery Ready to ship within 25 working days
PRINT
SYNBONE foam block series 20 PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 34.95
0040-20-50-02
Orientation neutral Model Type intact Dimensions 150mm x 100mm x 53mm, Tolerances: +/-1.2mm Material PUR/materials properties: Density: 20 PCF / 0.35 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 8-12 MPa; 40-45 MPa (ISO 604) Delivery Ready to ship within 25 working days
PRINT
Lumbar Spine vertebrae single set from L1 to L5
CHF 44.55
LSS9370.20
Orientation neutral Model Type intact Dimensions Different sizes from L1-L5 Material LSS material with cancellous bone density Delivery Delivery time upon request
PRINT
Lumbar Spine vertebrae single set from L1 to L5.
CHF 44.55
LD9370.20
Orientation neutral Model Type intact Dimensions Different sizes from L1-L5 Material LD material: Low density solid foam Delivery Delivery time upon request
PRINT
SYNBONE foam block series 20 PCF 35x60x50mm with cut and 12 pre drilled holes Ø1.5mm
CHF 45.30
0040-20-12
Orientation neutral Model Type intact Dimensions Length: 60mm, Width: 35mm, Height: 50mm, 12 holes: Ø 1.5mm Material PUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183) Compressive strengths: 8-12 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
SYNBONE foam block series 42PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 45.35
0040-42-50-02
Orientation neutral Model Type intact Dimensions 150mm x 100mm x 53mm, Tolerances: +/-1.2mm Material PUR/materials properties: Density: 41.82 PCF / 0.67 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 15-20 MPa; 40-45 MPa (ISO 604) Delivery Ready to ship within 25 working days
PRINT
Lumbar Spine vertebrae single set from T10 to L5
CHF 54.90
LSS9370.10
Orientation neutral Model Type intact Dimensions Different sizes from T10-L5 Material LSS material with cancellous bone density Delivery Delivery time upon request
PRINT
Hollow hemi-sphere with a wall thickness of 5mm
CHF 59.65
PR0112.01
Orientation neutral Model Type intact Dimensions Diameter: 190mm. Wall thickness: 5mm. Weight: 215g +/- 5% Material Modified bone-like polyurethane Delivery Ready to ship within 10 working days
PRINT
Hollow hemi-sphere with a wall thickness of 6mm
CHF 59.65
PR0057
Orientation neutral Model Type intact Dimensions Diameter: 190mm. Wall thickness: 6mm. Weight: 250g +/- 5% Material Modified bone-like polyurethane Delivery Ready to ship within 10 working days
PRINT
Hollow hemi-sphere with a wall thickness of 7mm
CHF 59.65
PR0110.01
Orientation neutral Model Type intact Dimensions Diameter: 190mm. Wall thickness: 7mm. Weight: 300g +/- 5% Material Modified bone-like polyurethane Delivery Ready to ship within 10 working days
PRINT
Lumbar Spine from L3-L5 to Sacrum with lateral band
CHF 61.10
LD9377
Orientation neutral Model Type intact Dimensions Overall length: 235mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum
CHF 61.10
LD9377.01
Orientation neutral Model Type intact Dimensions Overall length: 235mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum with lateral band
CHF 61.10
LSS9377
Orientation neutral Model Type intact Dimensions Overall length: 235mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum
CHF 61.10
LSS9377.01
Orientation neutral Model Type intact Dimensions Overall length: 235mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
SYNBONE foam block series 30 PCF in defined dimensions
CHF 63.80
0040-30-03
Orientation neutral Model Type intact Dimensions 300mm x 150mm x 50mm Tolerances +/-1.2mm Material PUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
Lumbar Spine from L1 to Sacrum
CHF 79.90
LD9379
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum
CHF 79.90
LSS9379
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from T10 to L5
CHF 82.65
LSSPR1212
Orientation neutral Model Type intact Dimensions Overall length: 290mm Material Vertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from T10 to L5
CHF 82.65
LDPR1212
Orientation neutral Model Type intact Dimensions Overall length: 290mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Cervical Spine from C1 to C7 with Vertebra Arteries
CHF 83.40
LSS9399.01
Orientation neutral Model Type intact Dimensions Overall length: 152 mm Material Vertebra: Solid foam LSS ancellous bone density, Disk: soft flexible foam, Arteries: PVC hose Delivery Delivery time upon request
PRINT
Cervical Spine section from C1 to C7
CHF 83.40
LD9399
Orientation neutral Model Type intact Dimensions Overall length: 152mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Cervical Spine from C1 to C7 with vertebral arteries
CHF 83.40
LD9399.01
Orientation neutral Model Type intact Dimensions Overall length: 152mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Skin cover with foam, silicone Skin including matrix and straps of Velcro for fixation
CHF 84.10
PR1549.30
Orientation neutral Model Type intact Dimensions Length: 410mm. Width: 186mm. Thickness: 12mm Material PU foam and silikon Delivery Ready to ship within 15 working days
PRINT
Cervical Spine from C1 to T1 with vertebral arteries
CHF 87.70
LD9398
Orientation neutral Model Type intact Dimensions Overall length: 161mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum
CHF 89.95
LDPR1232.10
Orientation neutral Model Type intact Dimensions Overall length: 230mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with pre-drilled pedicle holes
CHF 91.95
LDPR1423
Orientation neutral Model Type intact Dimensions Overall length: 230mm. Diameter pedicle holes: 5.5mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1-L5 with Sacrum and pre-drilled pedicle hole
CHF 91.95
LSSPR1423
Orientation neutral Model Type intact Dimensions Overall length: 230mm. Diameter pedicle holes: 5.5mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Cervical Spine with occipital bone, vertebrae C1 to T1
CHF 94.70
LD9391
Orientation neutral Model Type intact Dimensions Overall length: 265mm Material Occiput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible Delivery Delivery time upon request
PRINT
Cervical Spine with occipital bone, vertebrae C1 to T1
CHF 94.70
LSS9391
Orientation neutral Model Type intact Dimensions Overall length: 265mm Material Occiput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum w/ spondylolisthesis at L5/Sacrum
CHF 94.30
LSS9376
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Vertebrae and Sacrum; Solid foam LSS cancellous bone density, Disk: soft foam, flexible Delivery Delivery time upon request
PRINT
Cervical Spine with Occiput, vertebrae C1 toT1 with vertebra arteries
CHF 97.60
LSS9391.01
Orientation neutral Model Type intact Dimensions Overall length: 265mm Material Occiput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible, Arteries: PVC hose Delivery Delivery time upon request
PRINT
Spine from L4 to L5 with Pelvis
CHF 99.05
LD9311
Orientation neutral Model Type intact Dimensions Overall length: 245mm Pelvis width: 310mm Material Vertrebrae: solid foam low density. Pelvis: Solid foam, dense cancellous bone Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Entire Spine from L4 to L5 with Pelvis
CHF 99.05
LSS9311
Orientation neutral Model Type intact Dimensions Overall length: 245mm Pelvis width: 310mm Material Bones: solid foam LSS cancellous bone density; Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Hollow sphere consists of 2 glued hemi-spheres with a wall thickness of 5mm
CHF 104.40
PR0112
Orientation neutral Model Type intact Dimensions Diameter: 190mm. Wall thickness: 5mm. Weight: 430g +/- 5% Material Modified bone-like polyurethane Delivery Ready to ship within 10 working days
PRINT
Hollow sphere consists of 2 glued hemi-spheres with a wall thickness of 6mm
CHF 104.40
PR0111
Orientation neutral Model Type intact Dimensions Diameter: 190mm. Wall thickness: 6mm. Weight: 500g +/- 5% Material Modified bone-like polyurethane Delivery Ready to ship within 10 working days
PRINT
Hollow sphere consists of 2 glued hemi-spheres with a wall thickness of 7mm
CHF 104.40
PR0110
Orientation neutral Model Type intact Dimensions Diameter: 190mm. Wall thickness: 7mm. Weight: 600g +/- 5% Material Modified bone-like polyurethane Delivery Ready to ship within 10 working days
PRINT
Hollow sphere consists of 2 glued 2 hemi-spheres with a wall thickness of 7mm
CHF 104.40
PR0110.20
Orientation neutral Model Type intact Dimensions Diameter: 190mm. Wall thickness: 7mm. Weight: 400g +/- 5% Material Modified bone-like polyurethane Delivery Ready to ship within 10 working days
PRINT
Lumbar Spine from L1 - L5 with Sacrum
CHF 107.90
LSSPR1232.10
Orientation neutral Model Type intact Dimensions Overall length: 230mm Material Vertebrae and Sacrum Solid foam LSS cancellous density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracic Spine from T2 to T9
CHF 108.95
LSS9380
Orientation neutral Model Type intact Dimensions Overall length: 244mm Material Vertebrae: Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with sewable spinal cord and dura mater
CHF 111.95
LSS9379.8
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Spine: Solid foam LSS concellous bone density, Disk: soft flexible foam Dura: PE Cord: gelling agents Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with pre-drilled pedicle holes, with sewable spinal cord with dura mater
CHF 116.75
LDPR1423.8
Orientation neutral Model Type intact Dimensions Overall length: 230mm. Diameter pedicle holes: 5.5mm Material Solid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE Delivery Delivery time upon request
PRINT
Lumbar Spine from T10 to Sacrum
CHF 119.25
LSS9370
Orientation neutral Model Type intact Dimensions Overall length: 420mm Material Vertebrae and Sacrum Solid foam LSS cancellous density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Fractured thoracic lumbar Spine section from T10 to L2 with T11 wedge fracture
CHF 121.20
LD9368
Orientation neutral Model Type fractured Dimensions Overall length: 210mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Ready to ship within 15 working days
PRINT
Cervical Spine from C1 to C7 with sewable spinal cord and dura mater
CHF 123.10
LSS9399.8
Orientation neutral Model Type intact Dimensions Overall length: 152 mm Material Vertebra: Solid foam LSS ancellous bone density, Disk: soft flexible foam, dura mater: PE hose Delivery Delivery time upon request
PRINT
Cervical Spine with Occiput, vertebrae C1 to T1 with sewable spinal cord and dura mater
CHF 123.10
LSS9391.8
Orientation neutral Model Type intact Dimensions Overall length: 265mm Material Occiput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible Dura: PE Cord: gelling agents Delivery Delivery time upon request
PRINT
Lumbar Spine from L1-L5 with Sacrum, pre-drilled pedicle hole and sewable spinal cord with dura mater
CHF 129.70
LSSPR1423.8
Orientation neutral Model Type intact Dimensions Overall length: 230mm. Diameter pedicle holes: 5.5mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam, Dura: PE Cord: gelling agents Delivery Delivery time upon request
PRINT
Cervical Spine with Occipital Bone, vertebrae C1 to T1 with subluxation of C1-C2 and arteries
CHF 130.40
LD9392
Orientation neutral Model Type pathologic Dimensions Overall length: 265mm Material Occiput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with spondylolisthesis at L5/Sacrum
CHF 130.10
LD9376
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam low density. Disk: soft foam, flexible Delivery Delivery time upon request
PRINT
Lumbar Spine section from L1 to Sacrum and Pelvis hemi Iliac
CHF 131.75
LDPR1534
Orientation neutral Model Type intact Dimensions Overall length: 330mm Material Solid foam low density. Disk: soft flexible foam Hemi-Iliac: solid foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum and Pelvis hemi Iliac
CHF 131.75
LSSPR1534
Orientation neutral Model Type intact Dimensions Overall length: 330mm Material Vertebra & Pelvis:Solid foam LSS cancellousbone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
CHF 134.90
LD9379.0
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Spine: Solid foam low density. Disk: soft flexible foam Muscles: soft PUR Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
CHF 134.90
LSS9379.0
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Spine: Solid foam LSS cancellous bone density, Disk: soft flexible foam, Muscles: soft PUR Delivery Delivery time upon request
PRINT
Lumbar Spine with L1 to L5 with Sacrum and Pelvis
CHF 135.50
LDPR1335
Orientation neutral Model Type intact Dimensions Width: 305mm. Height: 350mm Material Cortical low density foam. Hemi-Pelvis: Solid foam. Dense cancellous bone Delivery Ready to ship within 15 working days
PRINT
Bone Clamp without table clamp. This SYNBONE Bone Clamp can be fixed to any SOLID table clamp available on the market. See pdf for instruction for use. Bone models are not included in delivery.
CHF 141.60
PR0734.60
Orientation neutral Model Type intact Dimensions Length: 19cm. Width: 8cm Height: 19.5cm Material Iron Delivery Ready to ship within 15 working days
PRINT
Skin replacement part with magnetic closure
CHF 141.70
8800.H
Orientation neutral Model Type intact Dimensions Length: 230mm Width: 180mm Depth:220 mm Material Skin: Silicone shore 00-30 Delivery Ready to ship within 15 working days
PRINT
Spine holder compact with flexible center block and rubber bands for fixation of rather short Spine segments for training.
CHF 149.40
0029
Orientation neutral Model Type intact Dimensions Length: 280mm, Width: 100mm, Height: 125mm Material HPL and POM Delivery Ready to ship within 20 working days
PRINT
Lumbar Spine from T10-L5 to Sacrum with Pelvis
CHF 155.90
LSS9371
Orientation neutral Model Type intact Dimensions Overall length: 495mm, Width: 300mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracal Spine from T1 to T12 with bending rod
CHF 161.25
LSS9329.7
Orientation neutral Model Type intact Dimensions Overall length: 329mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam, Felx rod Delivery Delivery time upon request
PRINT
Lumbar Spine from T10 to Sacrum with muscles
CHF 180.30
LSS9370.0
Orientation neutral Model Type intact Dimensions Overall length: 420mm Material Vertebrae and Sacrum Solid foam LSS cancellous density, Disk and Muscles: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracal lumbar Spine from T2 to L2
CHF 181.60
LSS9385
Orientation neutral Model Type intact Dimensions Overall length: 380 mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracal Spine section from T2 to L2
CHF 181.60
LD9385
Orientation neutral Model Type intact Dimensions Overall length: 380 mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Bone Clamp with table clamp. The ball head allows 360° of stepless adjustment in all directions. Bone models are NOT included in delivery
CHF 282.20
PR0733.60
Orientation neutral Model Type intact Dimensions Length: 44cm. Width: 30cm. Vice opening: 8cm Material Various materials Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine from T10-L5 to Sacrum with Pelvis and flex rod
CHF 184.35
LSS9371.7
Orientation neutral Model Type intact Dimensions Overall length: 495mm, Width: 300mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
CHF 207.70
LSS9379.60
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber Delivery Delivery time upon request
PRINT
Spine from T1 to Sacrum with bending rod
CHF 350.45
LD9320.7
Orientation neutral Model Type intact Dimensions Overall length: 660mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Spine from T1-L5 with Sacrum and flex rod
CHF 350.45
LSS9320.7
Orientation neutral Model Type intact Dimensions Overall length: 660 mm Material Solid foam LSS material. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from T7-L5 to Sacrum with Pelvis, with flex rod
CHF 363.30
LD9309.7
Orientation neutral Model Type intact Dimensions Overall length: 555mm, Width: 300mm, Material Cortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Spine from C1 to Sacrum with spinal cord and nerves and with vertebral arteries
CHF 382.30
LSS9315.6
Orientation neutral Model Type intact Dimensions Overall length: 780mm Material Vertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam, Arteries: PVC hose Delivery Delivery time upon request
PRINT
Spine C1-L5 with Occiput, all Vertebrae, Sacrum and vertebral arteries
CHF 385.50
LSS9310
Orientation neutral Model Type intact Dimensions Overall length: 855mm Material Vertebrae: LSS cancellous bone density; Occiput: Solid foam; Sacrum: low density; Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Entire Spine from T2 to L5 with Pelvis
CHF 386.90
LSS9308
Orientation neutral Model Type intact Dimensions Overall length: 645mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Spine C1-L5 with Occiput, all Vertebrae, Sacrum, spinal cord and nerves and vertebral arteries
CHF 410.55
LSS9310.6
Orientation neutral Model Type intact Dimensions Overall length: 855mm Material Vertebrae: LSS cancellous bone density; Occiput: Solid foam; Sacrum: low density; Disk: soft flexible foam; Nerve: foammaterial; Arteries: PVC hose Delivery Delivery time upon request
PRINT
Spine with Occipital Bone, all Vertebrae, Sacrum with Pelvis and Arteries
CHF 413.45
LSS9305
Orientation neutral Model Type intact Dimensions Overall length: 910mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Spine with all Vertebrae, Sacrum with Pelvis, flex rod and Arteries
CHF 422.50
LSS9306.7
Orientation neutral Model Type intact Dimensions Overall length: 850mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam and w/ flex rod Delivery Delivery time upon request
PRINT
Spine from T10 to Pelvis with spinal cord and nerves, muscles such as right m. psoas major, m. iliacus and dorsal spine muscles. With proximal femur
CHF 433.85
LSS9307.0
Orientation neutral Model Type intact Dimensions Overall length: 410mm Material Vertrebrae and Pelvis: solid foam LSS cancellous bone. Femur: Solid foam, dense cancellous bone. Disk: soft flexible foam Nerves and Muscles: PUR foam Delivery Delivery time upon request
PRINT
Spine from T10 to Pelvis with spinal cord and nerves, muscles such as right m. psoas major, m. iliacus and dorsal spine muscles. With proximal femur
CHF 433.85
LD9307.0
Orientation neutral Model Type intact Dimensions Overall length: 410mm Material Vertrebrae: solid foam low density. Pelvis: Solid foam, dense cancellous bone Disk: soft flexible foam Nerves and Muscles: PUR foam Delivery Delivery time upon request
PRINT
Spine with Occipital Bone, all Vertebrae, Sacrum with Pelvis, flex rod and Arteries
CHF 441.85
LSS9305.7
Orientation neutral Model Type intact Dimensions Overall length: 910mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam and w/ flex rod Delivery Delivery time upon request
PRINT
Spine Holder MIS with Skin cover and large lumbar Spine L1-Sacrum LDPR1232 as a set
CHF 452.65
PR1232
Orientation neutral Model Type intact Dimensions Length: 294mm. Width: 204mm. Height: 170mm Material Various materials Delivery Ready to ship within 15 working days