PRINT
Right proximal Femur with Ø10mm canal and radiopaque coating
CHF 25.80
2420.9
- Orientationright
- Model Typeintact
- DimensionsLength: 337mm. Neck angle: 135°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 10mm
- MaterialCortical / hard cancellous bone
- DeliveryReady to ship within 10 working days
PRINT
Pelvis with Sacrum and posterior mounted black rubber, with radiopaque coating
CHF 142.80
4083.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 160mm
- MaterialSolid foam, dense cancellous bone
- DeliveryReady to ship within 25 working days
PRINT
Right Tibia with radiopaque coating
CHF 25.80
1110.9
- Orientationright
- Model Typeintact
- DimensionsLength: 387mm, Tibia plateau width 74mm, Shaft diameter: 27mm, Canal diameter: 8mm
- MaterialCortical / hard cancellous bone
- DeliveryReady to ship within 25 working days
PRINT
Left medium Femur with distal canal opening radiopaque coating
CHF 28.05
2350.9
- Orientationleft
- Model Typeintact
- DimensionsLength: 460mm. Condylar width: 85mm. Neck angle: 120°. Anteversion: 18°. Head diameter: 49mm. Canal diameter: 10mm
- MaterialCortical / soft cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Right medium Femur with distal canal opening and with radiopaque coating
CHF 28.05
2162.9
- Orientationright
- Model Typeintact
- DimensionsLength: 450mm. Condylar width: 85mm. Neck angle: 122°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 9.5mm
- MaterialCortical / soft cancellous bone
- DeliveryReady to ship within 25 working days
PRINT
Left medium Femur with distal canal sealed and radiopaque coating
CHF 29.05
2350.01.9
- Orientationleft
- Model Typeintact
- DimensionsNeck angle: 120°, Anteversion: 18°, Head diameter: 49mm, Canal diameter: 10mm
- MaterialCortical / soft cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Mandible with cancellous bone and Easy Clip mechanism and radiopaque coating
CHF 30.85
8950.9
- Orientationneutral
- Model Typeintact
- DimensionsMandible width: 115mm
- MaterialCortical / cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Right Clavicle with radiopaque coating
CHF 31.65
5100.9
- Orientationright
- Model Typeintact
- DimensionsLength: 157mm. Shaft Diameter: 13mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Left medium Femur with pre-drilled Ø12mm canal on distal side sealed and with radiopaque coating
CHF 31.30
LS2340.9
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 450mm. Condylar width: 79mm. Neck angle: 128°. Anteversion: 11°. Head diameter: 45 mm. Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Right Scapula with radiopaque coating
CHF 31.65
5000.9
- Orientationright
- Model Typeintact
- DimensionsLength: 192mm, Width: 120mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Solid Sacrum without central nerve canal used for Spine models with radiopaque coating
CHF 33.65
LSS9470.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 113mm. Length: 110mm
- MaterialSolid foam, LSS cancellous bone density
- DeliveryReady to ship within 15 working days
PRINT
Right Humerus with radiopaque coating
CHF 38.15
5010.9
- Orientationright
- Model Typeintact
- DimensionsLength: 326mm. Shaft Diameter: 22mm. Head Diameter: 47mm
- MaterialCortical / hard cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Lumbar Spine vertebrae single set from L1 to L5 with radiopaque coating
CHF 71.40
LSS9370.20.9
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
Pelvis with radiopaque coating. Acetabular diameter 56mm
CHF 86.70
4060.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm, Height: 160mm Acetabular diameter: 56mm
- MaterialSolid foam, dense cancellous bone
- DeliveryReady to ship within 25 working days
PRINT
Hollow Skull with frontal sinus, maxillary sinus, septum and attached mandible but without Easy Clip mechanism. Radiopaque coating for imaging.
CHF 148.60
8890.9
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 227mm. Height: 167mm
- MaterialSkull and Mandible: Solid foam
- DeliveryReady to ship within 30 working days
PRINT
Cervical Spine from C1 to T1 with vertebral arteries and radiopaque coating
CHF 155.05
LD9398.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 161mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Thoracal Spine from T2 to T9 with radiopaque coating
CHF 155.05
LD9380.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Left Elbow with humerus, radius, ulna and ligaments in soft tissue with intermuscular fascia. Bones with radiopaque coating
CHF 156.75
5230.9.1
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 475mm
- MaterialLower Arm: Solid foam. Humerus: Cortical / soft cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Entire Spine from L4 to L5 with Pelvis and radiopaque coating
CHF 165.80
LD9311.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 245mm Pelvis width: 310mm
- MaterialVertrebrae: solid foam low density. Pelvis: Solid foam, dense cancellous bone Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Cervical Spine with occipital bone, vertebrae C1 to T1 and with radiopaque coating
CHF 174.40
LD9391.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with radiopaque coating
CHF 174.40
LD9379.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Cervical Spine with occipital bone, vertebrae C1 toT1, sewable spinal cord with dura mater and with radiopaque coating
CHF 186.65
LD9391.8.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: solid foam, C1 to T1: Solid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from T10 to Sacrum with radiopaque coating
CHF 193.80
LD9370.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with radiopaque coating
CHF 195.45
LDPR1232.10.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request