PRINT
Large Spine holder including Spine lg holder insert and navigations pin for large lumbar spine L1-Sacrum
CHF 1'101.90
PR1608.40
- Orientationneutral
- Model Typeintact
- DimensionsLength: 294mm. Width: 204mm. Height: 170mm
- MaterialVarious material
- DeliveryReady to ship within 30 working days
PRINT
Lumbar Spine from T10 to Sacrum. Muscles not included
CHF 124.70
LD9370
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Partial hollow Skull left side with vise attachment, frontal sinus and maxillary sinuses
CHF 30.35
8800.L
- Orientationleft
- Model Typeintact
- DimensionsSkull width: 74mm. Length: 235mm. Height: 161mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Partial hollow Skull right side with vise attachment, frontal sinus and maxillary sinuses
CHF 30.35
8800.R
- Orientationright
- Model Typeintact
- DimensionsSkull width: 74mm. Length: 235mm. Height: 161mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Lumbar Spine vertebrae single set from L1 to L5
CHF 44.55
LSS9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
Lumbar Spine vertebrae single set from L1 to L5.
CHF 44.55
LD9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLD material: Low density solid foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine vertebrae single set from T10 to L5
CHF 54.90
LSS9370.10
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from T10-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum with lateral band
CHF 61.10
LD9377
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum
CHF 61.10
LD9377.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum with lateral band
CHF 61.10
LSS9377
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum
CHF 61.10
LSS9377.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum
CHF 79.90
LD9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum
CHF 79.90
LSS9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from T10 to L5
CHF 82.65
LSSPR1212
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 290mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from T10 to L5
CHF 82.65
LDPR1212
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 290mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Cervical Spine from C1 to C7 with Vertebra Arteries
CHF 83.40
LSS9399.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS ancellous bone density, Disk: soft flexible foam, Arteries: PVC hose
- DeliveryDelivery time upon request
PRINT
Cervical Spine section from C1 to C7
CHF 83.40
LD9399
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Cervical Spine from C1 to C7 with vertebral arteries
CHF 83.40
LD9399.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Cervical Spine from C1 to T1 with vertebral arteries
CHF 87.70
LD9398
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 161mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum
CHF 89.95
LDPR1232.10
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with pre-drilled pedicle holes
CHF 91.95
LDPR1423
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm. Diameter pedicle holes: 5.5mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1-L5 with Sacrum and pre-drilled pedicle hole
CHF 91.95
LSSPR1423
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm. Diameter pedicle holes: 5.5mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Cervical Spine with occipital bone, vertebrae C1 to T1
CHF 94.70
LD9391
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Cervical Spine with occipital bone, vertebrae C1 to T1
CHF 94.70
LSS9391
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum w/ spondylolisthesis at L5/Sacrum
CHF 94.30
LSS9376
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialVertebrae and Sacrum; Solid foam LSS cancellous bone density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Cervical Spine with Occiput, vertebrae C1 toT1 with vertebra arteries
CHF 97.60
LSS9391.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible, Arteries: PVC hose
- DeliveryDelivery time upon request
PRINT
Spine from L4 to L5 with Pelvis
CHF 99.05
LD9311
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 245mm Pelvis width: 310mm
- MaterialVertrebrae: solid foam low density. Pelvis: Solid foam, dense cancellous bone Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Entire Spine from L4 to L5 with Pelvis
CHF 99.05
LSS9311
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 245mm Pelvis width: 310mm
- MaterialBones: solid foam LSS cancellous bone density; Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 - L5 with Sacrum
CHF 107.90
LSSPR1232.10
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Thoracic Spine from T2 to T9
CHF 108.95
LSS9380
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialVertebrae: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with sewable spinal cord and dura mater
CHF 111.95
LSS9379.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam LSS concellous bone density, Disk: soft flexible foam Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with pre-drilled pedicle holes, with sewable spinal cord with dura mater
CHF 116.75
LDPR1423.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm. Diameter pedicle holes: 5.5mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from T10 to Sacrum
CHF 119.25
LSS9370
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Fractured thoracic lumbar Spine section from T10 to L2 with T11 wedge fracture
CHF 121.20
LD9368
- Orientationneutral
- Model Typefractured
- DimensionsOverall length: 210mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryReady to ship within 15 working days
PRINT
Cervical Spine from C1 to C7 with sewable spinal cord and dura mater
CHF 123.10
LSS9399.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS ancellous bone density, Disk: soft flexible foam, dura mater: PE hose
- DeliveryDelivery time upon request
PRINT
Cervical Spine with Occiput, vertebrae C1 to T1 with sewable spinal cord and dura mater
CHF 123.10
LSS9391.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1-L5 with Sacrum, pre-drilled pedicle hole and sewable spinal cord with dura mater
CHF 129.70
LSSPR1423.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm. Diameter pedicle holes: 5.5mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam, Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Cervical Spine with Occipital Bone, vertebrae C1 to T1 with subluxation of C1-C2 and arteries
CHF 130.40
LD9392
- Orientationneutral
- Model Typepathologic
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with spondylolisthesis at L5/Sacrum
CHF 130.10
LD9376
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam low density. Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Lumbar Spine section from L1 to Sacrum and Pelvis hemi Iliac
CHF 131.75
LDPR1534
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialSolid foam low density. Disk: soft flexible foam Hemi-Iliac: solid foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum and Pelvis hemi Iliac
CHF 131.75
LSSPR1534
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialVertebra & Pelvis:Solid foam LSS cancellousbone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
CHF 134.90
LD9379.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam low density. Disk: soft flexible foam Muscles: soft PUR
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
CHF 134.90
LSS9379.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam LSS cancellous bone density, Disk: soft flexible foam, Muscles: soft PUR
- DeliveryDelivery time upon request
PRINT
Lumbar Spine with L1 to L5 with Sacrum and Pelvis
CHF 135.50
LDPR1335
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 350mm
- MaterialCortical low density foam. Hemi-Pelvis: Solid foam. Dense cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Skin replacement part with magnetic closure
CHF 141.70
8800.H
- Orientationneutral
- Model Typeintact
- DimensionsLength: 230mm Width: 180mm Depth:220 mm
- MaterialSkin: Silicone shore 00-30
- DeliveryReady to ship within 15 working days
PRINT
Spine holder compact with flexible center block and rubber bands for fixation of rather short Spine segments for training.
CHF 149.40
0029
- Orientationneutral
- Model Typeintact
- DimensionsLength: 280mm, Width: 100mm, Height: 125mm
- MaterialHPL and POM
- DeliveryReady to ship within 20 working days
PRINT
Lumbar Spine from T10-L5 to Sacrum with Pelvis
CHF 155.90
LSS9371
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Thoracal Spine from T1 to T12 with bending rod
CHF 161.25
LSS9329.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 329mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam, Felx rod
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from T10 to Sacrum with muscles
CHF 180.30
LSS9370.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk and Muscles: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Thoracal lumbar Spine from T2 to L2
CHF 181.60
LSS9385
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 380 mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Thoracal Spine section from T2 to L2
CHF 181.60
LD9385
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 380 mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from T10-L5 to Sacrum with Pelvis and flex rod
CHF 184.35
LSS9371.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
CHF 207.70
LSS9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Spine from T1 to Sacrum with bending rod
CHF 350.45
LD9320.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 660mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine from T1-L5 with Sacrum and flex rod
CHF 350.45
LSS9320.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 660 mm
- MaterialSolid foam LSS material. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from T7-L5 to Sacrum with Pelvis, with flex rod
CHF 363.30
LD9309.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 555mm, Width: 300mm,
- MaterialCortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine from C1 to Sacrum with spinal cord and nerves and with vertebral arteries
CHF 382.30
LSS9315.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 780mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam, Arteries: PVC hose
- DeliveryDelivery time upon request
PRINT
Spine C1-L5 with Occiput, all Vertebrae, Sacrum and vertebral arteries
CHF 385.50
LSS9310
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 855mm
- MaterialVertebrae: LSS cancellous bone density; Occiput: Solid foam; Sacrum: low density; Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Entire Spine from T2 to L5 with Pelvis
CHF 386.90
LSS9308
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 645mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine C1-L5 with Occiput, all Vertebrae, Sacrum, spinal cord and nerves and vertebral arteries
CHF 410.55
LSS9310.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 855mm
- MaterialVertebrae: LSS cancellous bone density; Occiput: Solid foam; Sacrum: low density; Disk: soft flexible foam; Nerve: foammaterial; Arteries: PVC hose
- DeliveryDelivery time upon request
PRINT
Spine with Occipital Bone, all Vertebrae, Sacrum with Pelvis and Arteries
CHF 413.45
LSS9305
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 910mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine with all Vertebrae, Sacrum with Pelvis, flex rod and Arteries
CHF 422.50
LSS9306.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 850mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam and w/ flex rod
- DeliveryDelivery time upon request
PRINT
Spine from T10 to Pelvis with spinal cord and nerves, muscles such as right m. psoas major, m. iliacus and dorsal spine muscles. With proximal femur
CHF 433.85
LSS9307.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 410mm
- MaterialVertrebrae and Pelvis: solid foam LSS cancellous bone. Femur: Solid foam, dense cancellous bone. Disk: soft flexible foam Nerves and Muscles: PUR foam
- DeliveryDelivery time upon request
PRINT
Spine from T10 to Pelvis with spinal cord and nerves, muscles such as right m. psoas major, m. iliacus and dorsal spine muscles. With proximal femur
CHF 433.85
LD9307.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 410mm
- MaterialVertrebrae: solid foam low density. Pelvis: Solid foam, dense cancellous bone Disk: soft flexible foam Nerves and Muscles: PUR foam
- DeliveryDelivery time upon request
PRINT
Spine with Occipital Bone, all Vertebrae, Sacrum with Pelvis, flex rod and Arteries
CHF 441.85
LSS9305.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 910mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam and w/ flex rod
- DeliveryDelivery time upon request
PRINT
Spine Holder MIS with Skin cover and large lumbar Spine L1-Sacrum LDPR1232 as a set
CHF 452.65
PR1232
- Orientationneutral
- Model Typeintact
- DimensionsLength: 294mm. Width: 204mm. Height: 170mm
- MaterialVarious materials
- DeliveryReady to ship within 15 working days