Showing 1–24 of 887 resultsSorted by latest
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Dome Foam Block w/ cortical shell a/ cancellous structure w/ Generic Felt Rotator Cuff 1mm green
Dome Foam Block with Generic Rotator Cuff (1mm felt) = Ø75mm x 50mm. Cortical shell and cancellous structure. Sutiable for anchor. 3D printed.
PR2532.3D
PR2532.3D
- Orientationneutral
- Model Typeintact
- DimensionsØ 75mm; Height: 50mm; Generic Rotator Cuffs 3mm
- Material3D printed Dome: Generic Rotator Cuffs: Felt
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg left distal large w/ large tibia fibula a/ large 4 part foot. Fibula w/ Canal. Soft Tissue
Left lower Leg distal large with tibia, fibula with canal and 4-part foot consisting of talus, calcaneus, forefoot sections, ligaments and soft tissue with intermuscular fascia.
9670.1
9670.1
- Orientationleft
- Model Typeintact
- MaterialTibia & Calcaneus: Cortical density / low cancellous bone structure / Fibula Talus and , Forefoot sections: solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left proximal recon prepared for broaching exercises.
Left large Femur with pre-drilled Ø16mm canal on distal side sealed
LSH2335.11
LSH2335.11
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 240mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°.Canal Ø: 12mm
- MaterialCortical hard density / low cancellous bone structure
PRINT
5200.STEP
- Orientationleft
- Model Typeintact
- DimensionsLength: 157mm. Shaft Diameter: 13mm
- MaterialSTEP data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Radius right malunion w/ radiopaque coating
Right Radius with a malunion on the distal end with radiopaque coating
7150.9
7150.9
- Orientationright
- Model Typeintact, malunion
- DimensionsLength: 246mm. Shaft diameter: 13mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL hard cortical a/ notch
Set of 24 PCS of LSH1816.36.NH
LSH1816.36.NH.24
LSH1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foot 1-part right w/ Bunion Hallux valgus a/ Hammertoes a/ flexible 1st metatarsal joint
Foot 1-part right w/ Bunion Hallux valgus a/ Hammertoes a/ flexible 1st metatarsal joint
PR2004.02
PR2004.02
- Orientationright
- Model Typemalformation
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Shoulder left recon w/soft tissue a/vice attachment
Left Shoulder with scapula, clavicle, humerus, ligaments, cancellous humeral head, and cancellous under glenoid fossa. With vice attachment and soft tissue with intermuscular fascia, with radiopaque coating
LSH5760.9.1
LSH5760.9.1
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 430mm Drill hole diameter: distal 6mm
- MaterialClavicula: Solid Foam. Humerus with cancellous head. Scapula with cancellous under glenoid fossa.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Set of 24 pieces of left large knee with varus (3°-7°) assembled with soft cortical femur and tibia, with ligament balancing collateral ligaments, and slightly stretchy cruciate ligaments.
LS1816.36.NH.24
LS1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL hard cortical a/ notch
Left large Knee (varus 3°-7°) assembled with femur and tibia and ligament balancing collateral ligaments LCL, MCL, and slightly stretchy cruciate ligaments ACL, PCL. Compatible with ROB Pro Knee Holder System.
LSH1816.36.NH
LSH1816.36.NH
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Left large Knee (varus 3°-7°) assembled with femur and tibia and ligament balancing collateral ligaments LCL, MCL, and slightly stretchy cruciate ligaments ACL, PCL. Compatible with ROB Pro Knee Holder System.
LS1816.36.NH
LS1816.36.NH
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hip left acetabulum Ø50mm a/ femur
Left Hemi-Pelvis with left Femur, mounted with rubber bands and sacrum, actabular diameter 50mm
LSHPR1720
LSHPR1720
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 530mm. Canal diameter: 14mm
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 w/ Pelvis a/ radiopaque coating
Lumbar Spine from T10-L5 to Sacrum with Pelvis and radiopaque coating
LD9371.9
LD9371.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm
- MaterialCortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
4082
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 160mm
- MaterialHard cortical bone / soft cancellous bone
- DeliveryEstimated to ship within 15 working days
PRINT
Foot 4-part right large
Right large 4-part Foot with talus, calcaneus, lateral and medial forefoot section
9130
9130
- DimensionsLength: 280 mm
- MaterialCalcaneus: Cortical density / low cancellous bone structure ; Forefoot sections: solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Elbow right w/ radial nerve a/ soft tissue
Right Elbow with humerus, radius, ulna, nerve, ligaments and soft tissue with intermuscular fascia
5030.01.1
5030.01.1
- Orientationright
- Model Typeintact
- DimensionsOverall length: 475mm
- MaterialLower Arm: Solid foam. Humerus: Cortical hard cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right w/ 3D printed for imaging a/ soft tissue 90°
Right intact lower Leg distal with medium tibia, fibula. Intact ankle and foot. 3D Printed.
9191.1-3D
9191.1-3D
- Orientationright
- Model Typeintact
- Material3D Printed
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0040-12.5-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 12.5 PCF / 0.24 g/cm3 (ISO 1183), Compressive strength: 2-4 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Hip left acetabulum Ø50mm a/ femur w/ soft tissue
Left Total Hip Replacement joint reconstruction model using hemi pelvis and femur, suitable for Direct Anterior Approach (DAA)
LSHPR1721.1
LSHPR1721.1
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 595mm. Canal diameter: 14mm
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hip left acetabulum Ø50mm a/ femur w/ soft tissue window velcro
Left Total Hip Replacement joint reconstruction model using hemi pelvis and femur, suitable for Direct Anterior Approach (DAA)
LSHPR1720.1
LSHPR1720.1
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 595mm. Canal diameter: 14mm
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow w/ mandible, muscles, skin attached a/ vise attachment
Hollow Skull with vise attachment, muscles and attached Mandible all attached to skin, prepared for minimally invasive orthognathic surgery
8820.01.2
8820.01.2
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam, Muscle: PUR red, Skin: Silicone shore 00-30
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
8105.31
- Orientationneutral
- Model Typeintact
- MaterialTransparent rigid resin
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
8105.21
- Orientationneutral
- Model Typeintact
- MaterialTransparent rigid resin
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
7052
- Orientationright
- Model Typeintact
- DimensionsLength: 249mm, Shaft diameter: 13mm, Canal diameter: Ø6-4mm and distal.
- MaterialCortical / soft cancellous bone