Showing 49–72 of 889 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Spine bed flat posterior access T2-L5 w/ Sacrum a/ Pelvis
Lumbar Spine flatbed for posterior access. Holds spine models from T2 - L5 with Sacrum and Pelvis. Spine model is NOT included in delivery.
PR1329.30
PR1329.30
- Orientationneutral
- Model Typeintact
- Dimensions750 x 290 x 240 mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior access T2-L5 w/Sacrum a/Pelvis
Lumbar Spine bed for posterior acces. Holds spine models from T2 - L5 with Sacrum and Pelvis. Spine model is NOT included in delivery.
PR1329.20
PR1329.20
- Orientationneutral
- Model Typeintact
- Dimensions750 x 290 x 240 mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Foot right single bone w/ Bunion Hallux valgus a/ soft tissue
Right single bone Foot with bunion and hallux valgus and soft tissue with intermuscular fascia
PR2006.1
PR2006.1
- Orientationright
- Model Typemalformation
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0013
- Orientationneutral
- Model Typeintact
- DimensionsLength: 300mm Width: 150mm Height: 150mm
- MaterialPUR and aluminium
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Shoulder left recon w/soft tissue forearm a/vise attachment
Left Shoulder with scapula, clavicle, humerus, ligaments, cancellous humeral head, and cancellous under glenoid fossa; With vice attachment, soft tissue with intermuscular fascia and exposed forearm. Designed for joint reconstruction workshops.
LSH5761.1
LSH5761.1
- Orientationleft
- Model Typeintact
- DimensionsHumerus: 430mm
- MaterialClavicula: Solid Foam. Humeurs with cancellous head. Scapula with cancellous under glenoid fossa.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine thoracal lumbar T7-L5 Sacrum w/ radiopaque
Entire Spine from T7 to L5 with Sacrum and radiopaque coating
LSS9386.9
LSS9386.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall Length: mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSS9325
- Orientationneutral
- Model Typeintact
- DimensionsOverall length:550mm
- MaterialSolid foam LSS cancellous bone density. Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
LD9325
- Orientationneutral
- Model Typeintact
- DimensionsOverall length:550mm
- MaterialSolid foam low density. Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Skull hollow w/ Mandible a/ vise attachment STL data
STL Data from hollow Skull with frontal sinus, maxillary sinuses and septum with mandible and vise attachment
8220.STL
8220.STL
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 190mm. Height: 153mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Mandible malformation STL data
STL Data from Mandible with left-sided frontal tumor malformation
8990.STL
8990.STL
- Orientationneutral
- Model Typemalformation
- DimensionsMandible width:120mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
8950.STL
- Orientationneutral
- Model Typeintact
- DimensionsMandible width: 115mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Skull hollow Clip STL data
STL Data from hollow Skull with frontal sinus, maxillary sinuses and septum. With Easy Clip mechanism for mandibles. Without mandible
8880.STL
8880.STL
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 190mm. Height: 153mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Spine bed posterior access C1-L5 w/Occ a/Sacrum
Entire Spine bed for posterior access. Holds spine models from C1 - L5 with Odciput and Sacrum. Spine model is NOT included in delivery.
PR1237
PR1237
- Orientationneutral
- Model Typeintact
- Dimensions950 x 200 x 180mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Shoulder left recon w/soft tissue a/vice attachment
Left Shoulder with scapula, clavicle, humerus, ligaments, cancellous humeral head, and cancellous under glenoid fossa. With vice attachment and soft tissue with intermuscular fascia, with radiopaque coating
LSH5760.9.1
LSH5760.9.1
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 430mm Drill hole diameter: distal 6mm
- MaterialClavicula: Solid Foam. Humerus with cancellous head. Scapula with cancellous under glenoid fossa.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Bone Clamp w/ Ball Head
Bone Clamp with table clamp. The ball head allows 360° of stepless adjustment in all directions. Bone models are NOT included in delivery
PR0733.60
PR0733.60
- Orientationneutral
- Model Typeintact
- DimensionsLength: 44cm. Width: 30cm. Vice opening: 8cm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 Sacrum w/ radiopaque coating
Lumbar Spine designed specifically for vertebroplasty application with open cell structure, section from T10-L5, and Sacrum with radiopaque coating
LDPR0770.9
LDPR0770.9
- Orientationneutral
- Model Typeintact
- DimensionsLength: 390mm
- MaterialSacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Shoulder right w/ soft tissue a/ vice attachment
Right Shoulder with scapula including vice attachment, humerus, glenoid labrum, rotator cuff and soft tissue with intermuscular fascia
PR1602.1
PR1602.1
- Orientationright
- Model Typeintact
- DimensionsOverall length: 370mm
- MaterialHumerus: Cortical low density / soft cancellous bone, dense. Scapula: solid foam, Glenoid labrum: RUR, Rotator Cuff: Neoprene Foam: PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access C1-L5 w/Sacrum
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1229
PR1229
- Orientationneutral
- Model Typeintact
- Dimensions900 x 200 x 150mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine lumbar T10-L5 w/ Pelvis a/ radiopaque coating
Lumbar Spine from T10-L5 to Sacrum with Pelvis and radiopaque coating
LD9371.9
LD9371.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm
- MaterialCortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lower Leg right w/ Bunion Hallux valgus a/ 120° soft tissue
Right lower Leg with single bone foot, tibia, fibula, talus, calcaneus, all mid-foot and phalangeal bones, bunion hallux valgus, ligaments and soft tissue 120°
LD9160.1
LD9160.1
- Orientationright
- Model Typeintact
- DimensionsFoot length: 257mm. Malleolar width: 62mm. Lower Leg length: 440mm. Plantar flexion: 120°. Tibia canal diameter: 8 mm
- MaterialTibia: Cortical / hard cancellous bone Fibula: Solid foam Foot: Solid foam low density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine Holder navigation
Large Spine holder including navigations pin for large lumbar Spine L1-Sacrum
PR1608.30
PR1608.30
- Orientationneutral
- Model Typeintact
- DimensionsLength: 294mm. Width: 204mm. Height: 170mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Shoulder left recon w/soft tissue a/vice attachment
Left Shoulder with scapula, clavicle, humerus, ligaments, cancellous humeral head, and cancellous under glenoid fossa. With vice attachment and soft tissue with intermuscular fascia. Designed for joint reconstruction workshops
LSH5760.1
LSH5760.1
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 430mm Drill hole diameter: distal 6mm
- MaterialClavicula: Solid Foam. Humerus with cancellous head. Scapula with cancellous under glenoid fossa.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Shoulder right w/ vice attachment, soft tissue a/ 6 ETHIBOND needles
Right Shoulder with scapula including vice attachment, clavicle, humerus, ligaments, bicep tendon, axillary nerves and soft tissue with intermuscular fascia
PR0720.1
PR0720.1
- Orientationright
- Model Typeintact
- DimensionsOverall length: 370mm
- MaterialScapula/Clavicle: Cortical: Solid foam Humerus: Cortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed flat posterior access C1-L5 w/Sacrum
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum with slight skoliosis. Spine model is NOT included in delivery.
PR1229.10
PR1229.10
- Orientationneutral
- Model Typeintact
- Dimensions900 x 200 x 150mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days