Showing 745–768 of 901 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Elbow right w/ soft tissue X-ray file
X-ray PDF file from 5030.1 right Elbow with humerus, radius, ulna, nerve, ligaments and soft tissue
5030.1.XRF
5030.1.XRF
- Orientationright
- Model Typeintact
- DimensionsOverall length: 475mm
- MaterialX-Ray File
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right w/ Achilles Band w/ soft tissue 120° a/ extension rod for clamping
Right lower Leg with 3-part foot, tibia, fibula, talus, calcaneus, forefoot sections, ligaments. Plantarflexion of 90°. Soft tissue with intermuscular fascia. Proximal a extension rod is inserted for clamping.
9140.1.EX
9140.1.EX
- Orientationright
- Model Typeintact
- DimensionsOverall length: 550mm Foot length: 257mm, Malleolar width: 62mm, Lower Leg length: 440mm, Tibia canal diameter: 8mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee right arthroscopic w/ soft tissue a/ defect menisci
Right Knee with femur, proximal tibia, patella, ligaments, PCL, defect menisci and soft tissue with intermuscular fascia
PR1528.1
PR1528.1
- Orientationright
- Model Typeintact
- DimensionsOverall length: 720mm, Femur canal diameter 9,5mm
- MaterialCortical / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1613.20
- Model Typeintact
- DimensionsLength: 400mm. Width: 300mm. Thickness: 4mm
- MaterialSkin: Silicon with matrix Shore:00-30
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 Sacrum w/ radiopaque coating
Lumbar Spine from T10 to Sacrum with radiopaque coating
LD9370.9
LD9370.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 Sacrum w/ radiopaque coating
Lumbar Spine from L1 to Sacrum with radiopaque coating
LDPR1232.10.9
LDPR1232.10.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
SYNBONE PrecisionDrive CONNECT Station
SYNBONE PrecisionDrive Connect station with vise clamp and 5 pieces of demonstration foam connect
PR2455.01
PR2455.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm
- MaterialHolder: Carbon Steel. Block: Polyurethane, Density: 30 PCF
PRINT
Spine bed anterior access Lumbar T10 -L5 w/Sacrum
Lumbar Spine bed for anterior access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1310
PR1310
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 160mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed lateral access Lumbar T10-L5 w/ Sacrum
Lumbar Spine bed for lateral access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1308
PR1308
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 100mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Equine Forelimb left w/ soft tissue
Equine Forelimb with all bones from distal Radius to DIP, with hoof and soft tissue
0130.1
0130.1
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 552mm
- MaterialSolid foam / Cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Skull hollow w/ mandible, muscles a/ vise attachment
Hollow Skull with vise attachment and muscles, with attached mandible. Without Easy Clip mechanism
8820.0
8820.0
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam, Muscle: PUR red
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hip left acetabulum Ø50mm a/ medium femur sacrum w/ soft tissue
Left Total Hip Replacement joint reconstruction model using hemi pelvis and femur, suitable for Direct Anterior Approach (DAA)
LSHPR1721.1
LSHPR1721.1
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 595mm. Canal diameter: 14mm
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hip left acetabulum Ø50mm medium femur a/ sacrum w/ soft tissue window velcro
Left Total Hip Replacement joint reconstruction model using hemi pelvis and femur, suitable for Direct Anterior Approach (DAA)
LSHPR1720.1
LSHPR1720.1
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 595mm. Canal diameter: 14mm
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR2461.01.SET
- Orientationneutral
- Model Typeintact
- Dimensions154mm x 154mm x 6mm, Tolerances: +/-0.5mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
PRINT
Spine L1-L5 w/ Sacrum w/ Spinal Cord, Nerves a/ Flava
Lumbar Spine from L1 to Sacrum with spinal cord and nerves, ligaments, and flava
LD9379.60
LD9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Spine L1-L5 w/ Sacrum, Spinal Cord, Nerves and Flava
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
LSS9379.60
LSS9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Lower Leg right malunion w/ soft tissue a/ extension rod for clamping
Right lower Leg with multiplanar malunion varus 35° external rotation 35°midshaft tibia fibula deformity foot and soft tissue with intermuscular fascia. The foot position is fixed in 90 ° angle. Proximal a extension rod is inserted for clamping.
1167.1.EX
1167.1.EX
- Orientationright
- Model Typemalunion
- DimensionsOverall length: 530mm, Multiplanar malunion varus 35° external rotation 35°midshaft Tibia Fibula malunion
- MaterialTibia Cortical / hard cancellous bone, the remaining models are made of Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow w/ mandible, muscles e/clip a/ vise attachment
Hollow Skull with vise attachment and muscles, with attached mandible. With Easy Clip mechanism
8860.0
8860.0
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam, Muscle: PUR red
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 w/ Pelvis a/ radiopaque coating
Spine with L1-Sacrum and Pelvis with radiopaque coating
LDPR1335.9
LDPR1335.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 350mm
- MaterialCortical low density foam. Hemi-Pelvis: Solid foam. Dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 w/ Pelvis a/ radiopaque coating
Spine with L1-Sacrum and Pelvis radiopaque coating
LSSPR1335.9
LSSPR1335.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 350mm
- MaterialVertebrae and Pelvis Solid foam LSS cancellous density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
PR1613.25
- Model Typeintact
- DimensionsLength: 317mm. Width: 173mm. Thickness: 131mm
- MaterialPUR Foam red
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right malunion w/ soft tissue 90°
Right lower Leg with 3-part foot with tibia, fibula, calcaneus malunion, posterior structures, ligaments and 90° soft tissue with intermuscular fascia
9183.1
9183.1
- Orientationright
- Model Typeintact, malunion
- DimensionsFoot length: 257mm, Malleolar width: 67mm, Lower Leg length: 440mm, Tibia canal diameter: 8mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9315
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 780mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 w/ radiopaque coating
Lumbar Spine from T10 to L5 with radiopaque coating
LDPR1536.9
LDPR1536.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 298mm
- MaterialSpine T10-L5 cortical low density / open cell cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request