Showing 649–672 of 909 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Lower Leg right w/ pilon comminuted fracture a/ extension rod for clamping
Right lower Leg with 3-part foot, comminuted fractured pilon tibia, fractured fibula, talus, calcaneus, forefoot sections, ligaments.
9149.EX
9149.EX
- Orientationright
- Model Typeintact
- DimensionsOverall length: 550mm Foot length: 250mm, Malleolar width: 62mm, Lower Leg length: 440mm, Tibia canal diameter: 8 mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Spine lumbar T10-L5 Sacrum
Lumbar Spine from T10 to Sacrum with additional lateral ligaments from Sacrum to L3
LD9370.01
LD9370.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSS9370
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 w/ Sacrum & lateral ligaments
Lumbar Spine from T10 to Sacrum with additional lateral Ligaments from Sacrum to L3
LSS9370.01
LSS9370.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam LSS canaellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
0040-50-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Spine cervical C1-T1 w/ Occiput a/ Spinal Cord, Nerves, Arteries
Cervical Spine with Occiput, vertebrae C1 toT1 with spinal cord and nerves and vertebral arteries
LSS9391.01.6
LSS9391.01.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible, Arteries: PVC hose, Nerves: PUR
- DeliveryDelivery time upon request
PRINT
Femur medium right w/ soft tissue
Right medium Femur with soft tissue with intermuscular fascia and mounted on wood block
PR1505.1
PR1505.1
- Orientationright
- Model Typeintact
- DimensionsFemur Length: 450mm. Condylar width: 85mm. Neck angle: 122°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 9.5mm
- MaterialCortical low density / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right w/ distal femur
Right lower Leg with distal femur, tibia, fibula and 3-part foot
1160
1160
- Orientationright
- Model Typeintact
- DimensionsOverall length: 765mm
- MaterialTibia Cortical / hard cancellous bone, the remaining models are made of Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access Lumbar L1-L5 w/Sacrum
Lumbar Spine bed for posterior access Holds spine models from L1 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1312
PR1312
- Orientationneutral
- Model Typeintact
- Dimensions405 x 200 x 200mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Foam Coat Shoulder Left
Foam coat open, providing cavity, for the placement assembled left shoulded with vise attachment. Bone model is not included in scope of delivery.
PR2016
PR2016
- Model Typeintact
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine cervical C1 – C7 w/ spinal cord
Cervical Spine from C1 to C7 with sewable spinal cord and dura mater
LSS9399.8
LSS9399.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam, dura mater: PE hose
- DeliveryDelivery time upon request
PRINT
Spine cervical C1-C7 w/ spinal cord
Cervical Spine, vertebrae C1 to C7 with sewable spinal cord and dura mater
LD9399.8
LD9399.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Spine cervical C1-T1 Occiput w/ spinal cord
Cervical Spine with Occiput, vertebrae C1 to T1 with sewable spinal cord and dura mater
LSS9391.8
LSS9391.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Lower Leg right w/ Bunion Hallux valgus
Right lower Leg with single bone foot, tibia, fibula, talus, calcaneus, all mid-foot and phalangeal bones, bunion hallux valgus and ligaments
9160
9160
- Orientationright
- Model Typeintact
- DimensionsFoot Length: 250mm. Malleolar Width: 62mm. Lower Leg Length: 440mm. Tibia canal Diameter: 8 mm
- MaterialTibia: Cortical / hard cancellous bone Fibula: Solid foam Foot: Solid foam low density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Paediatric Femur SCFE custom
Right paediatric Femur with physis and displaced Femur Head (Slipped Capital Femoral Epiphysis). Proximal covered with a thin layer of elastomeric polyurethane, vessels and muscles
PR0954.G.0
PR0954.G.0
- Orientationright
- Model Typeintact
- AO/OTA FX Class31B1.3
- DimensionsLength: 336mm, shaft diameter: 23mm, head diameter: 38mm, anteversion: 25°
- MaterialCortical / soft cancellous bone, dense
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine thoracal T2-T9 w/ Spinal Cord a/ Nerves
Thoracal Spine from T2 to T9 with spinal cord and nerves
LSS9380.6
LSS9380.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialVertebrae: Solid foam LSS cancellous bone density, Disk: soft flexible foam, Nerves: foam
- DeliveryDelivery time upon request
PRINT
Spine thoracal T2-T9 w/ spinal cord a/nerves
Thoracal Spine from T2 to T9 with spinal cord and nerves
LD9380.6
LD9380.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
4082
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 160mm
- MaterialHard cortical bone / soft cancellous bone
- DeliveryEstimated to ship within 15 working days
PRINT
Spine lumbar L1-L5 w/ Sacrum, pre-drilled pedicle hole, a/ spinal cord
Lumbar Spine from L1-L5 with Sacrum, pre-drilled pedicle hole and sewable spinal cord with dura mater
LSSPR1423.8
LSSPR1423.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm. Diameter pedicle holes: 5.5mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam, Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Equine Forelimb left
Equine Forelimb with all bones from distal Radius to DIP without soft tissue and hoof
0100
0100
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 527mm
- MaterialSolid foam / Cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine lumbar w. spondylolysis
Lumbar Spine from L1 to Sacrum with spondylolisthesis at L5/Sacrum
LD9376
LD9376
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam low density. Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Pelvis hemi Iliac
Lumbar Spine section from L1 to Sacrum and Pelvis hemi Iliac
LDPR1534
LDPR1534
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialSolid foam low density. Disk: soft flexible foam Hemi-Iliac: solid foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Pelvis hemi Iliac
Lumbar Spine from L1 to Sacrum and Pelvis hemi Iliac
LSSPR1534
LSSPR1534
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialVertebra & Pelvis:Solid foam LSS cancellousbone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Sacrum and Muscles
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
LSS9379.0
LSS9379.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam LSS cancellous bone density, Disk: soft flexible foam, Muscles: soft PUR
- DeliveryDelivery time upon request