Showing 649–672 of 928 resultsSorted by popularity
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Generic sphere 6mm
Hollow sphere consists of 2 glued hemi-spheres with a wall thickness of 6mm, coated with rubber skin
PR0111.G
PR0111.G
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 6mm. Weight: 500g +/- 5%
- MaterialModified bone-like polyurethane coated with rubber Skin
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Elbow right 10° flexion w/ soft tissue
Right Elbow with humerus, radius, ulna, nerve and ligaments in 10° flexion and soft tissue with intermuscular fascia
5036.1
5036.1
- Orientationright
- Model Typeintact
- DimensionsOverall length: 510mm
- MaterialLower Arm: Solid foam. Humerus: Cortical hard cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Generic sphere 5mm
Hollow sphere consists of 2 glued hemi-spheres with a wall thickness of 5mm, coated with rubber skin
PR0112.G
PR0112.G
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 5mm. Weight: 430g +/- 5%
- MaterialModified bone-like polyurethane coated with rubber Skin
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 Sacrum w/ spinal cord
Lumbar Spine from L1 to Sacrum with sewable spinal cord and dura mater
LD9379.8
LD9379.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Generic sphere 7mm
Hollow sphere consists of 2 glued hemi-spheres with a wall thickness of 7mm, coated with rubber skin
PR0110.G
PR0110.G
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm, Wall thickness: 7mm, Weight: 500g +/- 5%
- MaterialModified bone-like polyurethane coated with rubber Skin
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access Cervical C1-T1 w/Occiput
Cervical Spine bed for posterior access. Holds spine models from C1 - T1 with Occiput. Spine model is NOT included in delivery.
PR1317
PR1317
- Orientationneutral
- Model Typeintact
- Dimensions320 x 200 x 143mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine lumbar L1-L5 Sacrum w/ spinal cord
Lumbar Spine from L1 to Sacrum with pre-drilled pedicle holes, with sewable spinal cord with dura mater
LDPR1423.8
LDPR1423.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm. Diameter pedicle holes: 5.5mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
PR1510
- Orientationright
- Model Typeintact
- DimensionsOverall length: 900mm
- MaterialFemur & Tibia: Cortical / soft cancellous bone / Fibula & 3-part Foot: solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine cervical C1-T1 w/ Occiput, w/ Spinal Cord a/ Nerves, w/ vice attachment
Cervical Spine with occiput, vertebrae C1 toT1, spinal cord and nerves and wooden vice attachment
LSS9390.6
LSS9390.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 360mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Spine cervical C1-T1 Occiput w/spinal cord a/nerves w/ vice attachment
Cervical Spine with occiput, vertebrae C1 to T1, spinal cord and nerves and wooden vice attachment
LD9390.6
LD9390.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 360mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
LSS9370
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 w/ Sacrum & lateral ligaments
Lumbar Spine from T10 to Sacrum with additional lateral Ligaments from Sacrum to L3
LSS9370.01
LSS9370.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam LSS canaellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 Sacrum
Lumbar Spine from T10 to Sacrum with additional lateral ligaments from Sacrum to L3
LD9370.01
LD9370.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lower Leg right w/ pilon comminuted fracture a/ extension rod for clamping
Right lower Leg with 3-part foot, fractured pilon tibia, fractured fibula, talus, calcaneus, forefoot sections, ligaments.
9152.EX
9152.EX
- Orientationright
- Model Typeintact
- DimensionsOverall length: 550mm Foot length: 250mm, Malleolar width: 62mm, Lower Leg length: 440mm, Tibia canal diameter: 8 mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
PR2456.01.SET
- Orientationneutral
- Model Typeintact
- Dimensions154mm x 154mm x 6.5mm, Tolerances: +/-0.5mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
PRINT
PR2457.01.SET
- Orientationneutral
- Model Typeintact
- Dimensions55mm x 50mm x 40mm, Tolerances: +/-0.5mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
PRINT
Spine cervical C1-T1 w/ Occiput a/ Spinal Cord, Nerves, Arteries
Cervical Spine with Occiput, vertebrae C1 toT1 with spinal cord and nerves and vertebral arteries
LSS9391.01.6
LSS9391.01.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible, Arteries: PVC hose, Nerves: PUR
- DeliveryDelivery time upon request
PRINT
0040-50-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Lower Leg right w/ distal femur
Right lower Leg with distal femur, tibia, fibula and 3-part foot
1160
1160
- Orientationright
- Model Typeintact
- DimensionsOverall length: 765mm
- MaterialTibia Cortical / hard cancellous bone, the remaining models are made of Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur medium right w/ soft tissue
Right medium Femur with soft tissue with intermuscular fascia and mounted on wood block
PR1505.1
PR1505.1
- Orientationright
- Model Typeintact
- DimensionsFemur Length: 450mm. Condylar width: 85mm. Neck angle: 122°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 9.5mm
- MaterialCortical low density / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access Lumbar L1-L5 w/Sacrum
Lumbar Spine bed for posterior access Holds spine models from L1 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1312
PR1312
- Orientationneutral
- Model Typeintact
- Dimensions405 x 200 x 200mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Shoulder Left soft tissue cover
Foam coat open, providing cavity, for the placement assembled left shoulded with vise attachment. Bone model is not included in scope of delivery.
PR2016
PR2016
- Model Typeintact
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine cervical C1-T1 Occiput w/ spinal cord
Cervical Spine with Occiput, vertebrae C1 to T1 with sewable spinal cord and dura mater
LSS9391.8
LSS9391.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Spine cervical C1 – C7 w/ spinal cord
Cervical Spine from C1 to C7 with sewable spinal cord and dura mater
LSS9399.8
LSS9399.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam, dura mater: PE hose
- DeliveryDelivery time upon request