Showing 1–24 of 1489 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL hard cortical a/ notch
Set of 24 PCS of LSH1816.36.NH
LSH1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
12211
PRINT
LS2016.36.NH.24
PRINT
Foot 1-part right w/ Bunion Hallux valgus a/ Hammertoes a/ flexible 1st metatarsal joint
Foot 1-part right w/ Bunion Hallux valgus a/ Hammertoes a/ flexible 1st metatarsal joint
PR2004.02
- Orientationright
- Model Typemalformation
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0001
PRINT
Shoulder left recon w/soft tissue a/vice attachment
Left Shoulder with scapula, clavicle, humerus, ligaments, cancellous humeral head, and cancellous under glenoid fossa. With vice attachment and soft tissue with intermuscular fascia, with radiopaque coating
LSH5760.9.1
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 430mm Drill hole diameter: distal 6mm
- MaterialClavicula: Solid Foam. Humerus with cancellous head. Scapula with cancellous under glenoid fossa.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Set of 24 pieces of left large knee with varus (3°-7°) assembled with soft cortical femur and tibia, with ligament balancing collateral ligaments, and slightly stretchy cruciate ligaments.
LS1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL hard cortical a/ notch
Left large Knee (varus 3°-7°) assembled with femur and tibia and ligament balancing collateral ligaments LCL, MCL, and slightly stretchy cruciate ligaments ACL, PCL. Compatible with ROB Pro Knee Holder System.
LSH1816.36.NH
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Left large Knee (varus 3°-7°) assembled with femur and tibia and ligament balancing collateral ligaments LCL, MCL, and slightly stretchy cruciate ligaments ACL, PCL. Compatible with ROB Pro Knee Holder System.
LS1816.36.NH
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0349.10
- Orientationright
- Model Typeintact
- DimensionsLength: 326mm. Shaft Diameter: 22mm. Head Diameter: 47mm
- MaterialCortical / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Soft tisue cover for Hip left w/ window velcro
Left soft tissue cover for Hip and velcro straps with intermuscular fasica.
PR0844
PRINT
Hip left acetabulum Ø50mm a/ femur
Left Hemi-Pelvis with left Femur, mounted with rubber bands and sacrum, actabular diameter 50mm
PR1720
- Orientationleft
- DimensionsHip model femur
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 w/ Pelvis a/ radiopaque coating
Lumbar Spine from T10-L5 to Sacrum with Pelvis and radiopaque coating
LD9371.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm
- MaterialCortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine Torso C1-L5 w/ Pelvis. Normal. Ribs, Muscles, Nerves w/ soft tissue a/ skin
Spine Torso from C1-L5 with Pelvis, radiopaque coating, muscle multifidus, ribs, spinal nerves with soft tissue and skin
LD9363.FI
- Orientationneutral
- MaterialSpine and Pelvis: Solid foam low density, Disk: dense flexible foam, Soft Tissue: PU, Skin: PU
- DeliveryDelivery time upon request
PRINT
Cellular Foam Block 8-9 PCF 100x100x100
SYNBONE cellular foam block 8-9 PCF in 100 x 100 x 100mm
PR0080-09-01
- Orientationneutral
- Model Typeintact
- Dimensions100 x 100 x 100mm
- MaterialPolyurethane
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
4082
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 160mm
- MaterialHard cortical bone / soft cancellous bone
- DeliveryEstimated to ship within 15 working days
PRINT
Foot 4-part right large
Right large 4-part Foot with talus, calcaneus, lateral and medial forefoot section
9130
- DimensionsLength: 280 mm
- MaterialCalcaneus: Cortical density / low cancellous bone structure ; Forefoot sections: solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036.06
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp lig. bal. without transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.05
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. without transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.01
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Foot right
Right reference foot foam cover to be used in combination with ROB Knee Holder System
0037.20.R
- Orientationright
- DimensionsLength: 255mm, Width: 100mm, Height: 180mm Foot angle: 120°
- MaterialFoam coat
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine T2-L5 w/ Pelvis a/ radiopaque coating
Entire Spine from T2 to L5 with Pelvis and radiopaque coating
LSS9308.9
- DimensionsOverall length: 645mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Pelvis Intact, L4/L5, proximal femur w/ radiopaque coating a/ covered w/ soft tissue a/ skin
Intact Pelvis with L4-L5 and proximal femur, radiopaque coating with soft tissue cover and skin
4205.9.1
- Orientationneutral
- Model Typeintact
- DimensionsLength: 540mm, Width: 330mm, Height: 220mm
- MaterialPelvis: Solid foam, dense cancellous bone Soft Tissue: PUR Foam
- DeliveryEst. Ready to be shipped within 20 working days