Showing 529–552 of 1490 resultsSorted by popularity
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Knee large left recon w/ LCL, MCL, PCL
Left large Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, and PCL
LSH1750
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 895mm. Condylar width: 95mm. Tibia plateau width: 88mm Canal diameter: Femur 15mm, Tibia 10mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
LSS9320
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 780mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine holder compact
Spine holder compact with flexible center block and rubber bands for fixation of rather short Spine segments for training.
0029
- Orientationneutral
- Model Typeintact
- DimensionsLength: 280mm, Width: 100mm, Height: 125mm
- MaterialHPL and POM
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Generic bone to perform tibial cut w/ solid foam
Generic bone for tibial cut training
1902.102
- Orientationneutral
- Model Typeintact
- DimensionsLength: 250mm Oval Diameters: 48/77mm
- MaterialSolid soft foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Lower Arm right fractured
Right Lower Arm with fractured Radius, fractured Ulna and interosseous membrane
6502
- Orientationright
- Model Typefractured
- AO/OTA FX Class2R2A, 2U1B1, 2U2C3
- DimensionsOverall Length: 270mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
0800.02.01
- Orientationright
- Model Typefractured
- DimensionsOverall length: 155mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hand Bed Set
Set of two pieces of Hand Beds. Bed A: for dorsal access; Bed B: for palmar access.
PR1401
- Orientationright
- Model Typeintact
- DimensionsLength: 500mm. Width: 200mm. Height 73mm
- MaterialPP33
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Generic sphere 5mm
Hollow sphere consists of 2 glued hemi-spheres with a wall thickness of 5mm, coated with rubber skin
PR0112.G
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 5mm. Weight: 430g +/- 5%
- MaterialModified bone-like polyurethane coated with rubber Skin
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foam Block 8.7 PCF 110x110x40
SYNBONE foam block series 8.7 PCF in defined dimensions
0040-8.7-01
- Orientationneutral
- Model Typeintact
- Dimensions110mm x 110mm x 40mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 8.7 PCF / 0.14 g/cm3 (ISO 1183), Compressive strength: 1.8-2 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1206
- Orientationneutral
- Model Typeintact
- DimensionsLength 65mm, Cortical wall: 3mm, Diameter 40mm, Cancellous bone with 0.4 - 1.2mm pores
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right
Right lower Leg with single bone foot, fibula, tibia, talus, calcaneus, all mid-foot and phalangeal bones and ligaments
9150
- Orientationright
- Model Typeintact
- DimensionsFoot length: 257mm, Malleolar width: 67mm, Lower Leg length: 440mm, Tibia canal diameter: 8mm
- MaterialTibia: Cortical / hard cancellous bone Fibula: Solid foam Foot: Solid foam low density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Canine Hindlimb right
Right Canine Hindlimb with all bones from pelvis to the metatarsus and major ligaments
0806
- Orientationright
- Model Typeintact
- DimensionsOverall length: 620mm
- MaterialSolid foam. Femur and Tibia: cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Meniscus Puck intact
Meniscus Puck with no tears made from silicone and fabric matrix
PR2120
- Orientationleft
- Model Typeintact
- DimensionsLength: 95mm Width: 53mm Height: 15mm
- MaterialSilicone with fabric matrix
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur right proximal X-ray file
X-ray PDF file from LD2220.01 right proximal Femur with distal canal opening
2220.01.XRF
- Orientationright
- Model Typeintact
- DimensionsLength: 337mm. Neck angle: 135°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 10mm
- MaterialX-Ray File
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSSPR1212
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 290mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSS9380
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialVertebrae: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Skull hollow w/ mandible, muscles a/ vise attachment
Hollow Skull with vise attachment and muscles, with attached mandible. Without Easy Clip mechanism
8820.0
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam, Muscle: PUR red
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium left recon w/LCL, MCL
Left medium Knee assembled with femur and tibia and elastic rubber band ligaments LCL, MCL
LS1954
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 79mm. Tibia plateau width:76mm Canal diameter: Femur 12mm, Tibia 12mm.
- MaterialCortical soft density / low cancellous bone. Ligaments: rubber band
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Mandible pre-cut w/ Easy Clip
Pre-cut Mandible with pre-cut of angular mandibular fracture right & left with Easy Clip mechanism
8903
- Orientationneutral
- Model Typepre-fractured
- DimensionsMandible width: 115mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Humerus right pre-drilled
Right Humerus with distal drill hole for intramedullary nailing and prosthesis
PR0349
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsLength: 326mm. Shaft diameter: 22mm. Head diameter: 47mm. Drill hole diameter: 9mm
- MaterialCortical / soft cancellous bone, dense
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0806.02.06
- Orientationright
- Model Typefractured
- DimensionsLength: 220mm +/- 1mm, Shaft Diameter: 17mm
- MaterialCortical / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0110.14
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 440mm. Radius thickness: 30x40mm
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1119
- Orientationneutral
- Model Typeintact
- DimensionsLength: 200mm, Width: 50mm, Height: 45mm, Density:0.25 Kg/dm3
- MaterialPUR foam gray colour
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Equine Forelimb left w/fractures 1,2,5 a/ soft tissue
Equine Forelimb with all bones from distal Radius to DIP, with hoof, soft tissue and with fractures 1, 2 & 5
0130.1.14
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 552mm
- MaterialSolid foam / Cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days