PRINT
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and attached mandible. Without Easy Clip mechanism
CHF 165.85
8825
Orientation neutral Model Type fractured Dimensions Skull Width: 149mm. Length: 235mm. Height: 185mm Material Skull and Mandible: Solid foam Delivery Ready to ship within 15 working days
PRINT
Entire Spine from L4 to L5 with Pelvis and radiopaque coating
CHF 165.80
LD9311.9
Orientation neutral Model Type intact Dimensions Overall length: 245mm Pelvis width: 310mm Material Vertrebrae: solid foam low density. Pelvis: Solid foam, dense cancellous bone Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Fractured hollow Skull with vise attachment, frontal sinus, maxillary sinuses, septum. With Easy Clip mechanism for mandibles
CHF 166.60
8844
Orientation neutral Model Type fractured Dimensions Skull width: 149mm. Length: 235mm. Height: 161mm Material Solid foam Delivery Ready to ship within 15 working days
PRINT
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum. Without Easy Clip mechanism and without mandible
CHF 167.10
8801
Orientation neutral Model Type fractured Dimensions Skull width: 149mm. Length: 235mm. Height: 161mm Material Solid foam Delivery Ready to ship within 15 working days
PRINT
Fractured large lumbar Spine from T10 to Sacrum
CHF 172.15
LD9372
Orientation neutral Model Type fractured AO/OTA FX Class 53.1.A Dimensions Overall length: 420mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Ready to ship within 15 working days
PRINT
Fractured large lumbar Spine section from T10 to Sacrum
CHF 172.20
LD9378
Orientation neutral Model Type fractured AO/OTA FX Class 53.1.B3 Dimensions Overall length: 417mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Ready to ship within 15 working days
PRINT
Fractured large lumbar Spine from T10 to Sacrum
CHF 172.15
LSS9372
Orientation neutral Model Type fractured AO/OTA FX Class 53.1.A Dimensions Overall length: 420mm Material Vertebrae & Sacrum Solid foam LSS cancellous density; Disk: soft flexible foam Delivery Ready to ship within 15 working days
PRINT
Cervical Spine with occipital bone, vertebrae C1 to T1 and with radiopaque coating
CHF 174.40
LD9391.9
Orientation neutral Model Type intact Dimensions Overall length: 265mm Material Occiput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with radiopaque coating
CHF 174.40
LD9379.9
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum and hemi Iliac white radiopaque coating
CHF 174.40
LDPR1534.9
Orientation neutral Model Type intact Dimensions Overall length: 330mm Material Solid foam low density. Disk: soft flexible foam Hemi-Iliac: solid foam Delivery Delivery time upon request
PRINT
Large lumbar Spine from T10 to Sacrum
CHF 176.30
LDPR0967
Orientation neutral Model Type fractured AO/OTA FX Class 53.1 Dimensions Overall length: 420mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This bed is 60 mm higher to the caudal side than PR1309.01. Spine model is NOT included in delivery.
CHF 178.20
PR1309
Orientation neutral Model Type intact Dimensions 500 x 200 x 200mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This Bed is 60 mm lower to the caudal side than PR1309. Spine model is NOT included in delivery.
CHF 178.20
PR1309.01
Orientation neutral Model Type intact Dimensions 500 x 200 x 140 mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Cervical Spine bed for posterior and anterior access. Holds spine models from C1 - T1 with Occiput. Spine model is NOT included in delivery.
CHF 179.30
PR1230
Orientation neutral Model Type intact Dimensions 301 x 200 x 180mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Lumbar Spine L1 to Sacrum with continuous supra interspinous ligaments, continuous flava and nerves.
CHF 179.30
LSS9351
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Bones: Solid foam LSS cancellous bone density. Disk: soft flexible foam. Ligaments: RUR Delivery Delivery time upon request
PRINT
Fractured large thoracic lumbar Spine section from T9 to L4
CHF 179.70
LD9381
Orientation neutral Model Type fractured AO/OTA FX Class 52.12.B3, 53.1.B3 Dimensions Overall length: 273mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine from T10 to Sacrum with bilateral multifidus and erector Spine muscles
CHF 180.30
LD9370.0
Orientation neutral Model Type intact Dimensions Overall length: 420mm Material Solid foam low density. Disk: soft flexible foam Muscles: soft PUR Delivery Delivery time upon request
PRINT
Lumbar Spine from T10 to Sacrum with muscles
CHF 180.30
LSS9370.0
Orientation neutral Model Type intact Dimensions Overall length: 420mm Material Vertebrae and Sacrum Solid foam LSS cancellous density, Disk and Muscles: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracal lumbar Spine from T2 to L2
CHF 181.60
LSS9385
Orientation neutral Model Type intact Dimensions Overall length: 380 mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracal Spine section from T2 to L2
CHF 181.60
LD9385
Orientation neutral Model Type intact Dimensions Overall length: 380 mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Bone Clamp with table clamp. The ball head allows 360° of stepless adjustment in all directions. Bone models are NOT included in delivery
CHF 282.20
PR0733.60
Orientation neutral Model Type intact Dimensions Length: 44cm. Width: 30cm. Vice opening: 8cm Material Various materials Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine from T10-L5 and Sacrum
CHF 183.45
LDPR0770
Orientation neutral Model Type intact Dimensions Length: 390mm Material Sacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and additional Easy Clip mechanism for mandibles
CHF 184.00
8841
Orientation neutral Model Type fractured Dimensions Skull width: 149mm. Length: 235mm. Height: 161mm Material Solid foam Delivery Ready to ship within 10 working days
PRINT
Lumbar Spine from T10-L5 to Sacrum with Pelvis, with flex rod and pre-drilled pedicle holes
CHF 184.35
LD9371.7
Orientation neutral Model Type intact Dimensions Overall length: 495mm, Width: 300mm, Pedicle hole diameter: 5.0mm Material Cortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam Delivery Delivery time upon request