Showing 385–408 of 519 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Spine lumbar L3-L5 w/ Sacrum and Nerves
Lumbar Spine from L3 to Sacrum with Nerves and Flava
LSSPR1535
LSSPR1535
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam lSS cancellous bone density, Disk: soft flexible foam, Nerves: rubber, Flava: silicon
- DeliveryDelivery time upon request
PRINT
Skull Brain Dura Mandible w/ vise attachment
Skull with vise attachment, frontal sinus, maxillary sinus, septum, Brain with ventricle insides, Dura has at left side colored hematoma. With Mandible. Without Easy Clip mechanism
8721
8721
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull: Solid foam Mandible: Cortical / cancellous bone Brain: Soft foam PUR Dura: elastic PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull Brain Dura Mandible Clip w/ vise attachment
Skull with vise attachment, frontal sinus, maxillary sinus, septum, Brain with ventricle insides and Dura. With Mandible. With Easy Clip mechanism for Mandible
8760
8760
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull: Solid foam Mandible: Cortical / cancellous bone Brain: Soft foam PUR Dura: elastic PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow Clip w/ fractured mandible a/ vise attachment
Hollow Skull with vise attachment, frontal and maxillary sinus, septum and fractured mandible. With Easy Clip mechanism for mandibles
8862
8862
- Orientationneutral
- Model Typefractured
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull: Solid foam Mandible: Cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine L4-L5 with Pelvis w/radiopaque coating
Entire Spine from L4 to L5 with Pelvis and radiopaque coating
LD9311.9
LD9311.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 245mm Pelvis width: 310mm
- MaterialVertrebrae: solid foam low density. Pelvis: Solid foam, dense cancellous bone Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Skull hollow fractured w/mandible a/vise attachment
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and attached mandible. Without Easy Clip mechanism
8825
8825
- Orientationneutral
- Model Typefractured
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow fractured Clip w/vise attachment
Fractured hollow Skull with vise attachment, frontal sinus, maxillary sinuses, septum. With Easy Clip mechanism for mandibles
8844
8844
- Orientationneutral
- Model Typefractured
- DimensionsSkull width: 149mm. Length: 235mm. Height: 161mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow fractured w/ vise attachment
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum. Without Easy Clip mechanism and without mandible
8801
8801
- Orientationneutral
- Model Typefractured
- DimensionsSkull width: 149mm. Length: 235mm. Height: 161mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9372
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class53.1.A
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSS9372
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class53.1.A
- DimensionsOverall length: 420mm
- MaterialVertebrae & Sacrum Solid foam LSS cancellous density; Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 fractured w/ Sacrum
Fractured large lumbar Spine section from T10 to Sacrum
LD9378
LD9378
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class53.1.B3
- DimensionsOverall length: 417mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Partial Skull Clip defect pre-cut w/vise attachment a/ mandible
Partial Skull with defect and pre-cut maxilla, vise attachment. Mandible with defect, and pre-cut, mounted with Easy Clip, with pre-drilled holes between teeth for wiring.
8100.01
8100.01
- Orientationneutral
- Model Typemalformation
- DimensionsSkull width: 145mm, Length: 210mm, Height: 138mm
- MaterialSolid foam high density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 Sacrum w/ radiopaque coating
Lumbar Spine from L1 to Sacrum with radiopaque coating
LD9379.9
LD9379.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine cervical C1-T1 Occiput w/ radiopaque coating
Cervical Spine with occipital bone, vertebrae C1 to T1 and with radiopaque coating
LD9391.9
LD9391.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Pelvis hemi Iliac w/ radiopaque coating
Lumbar Spine from L1 to Sacrum and hemi Iliac white radiopaque coating
LDPR1534.9
LDPR1534.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialSolid foam low density. Disk: soft flexible foam Hemi-Iliac: solid foam
- DeliveryDelivery time upon request
PRINT
LDPR0967
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class53.1
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access Lumbar T10-L5 w/Sacrum
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This bed is 60 mm higher to the caudal side than PR1309.01. Spine model is NOT included in delivery.
PR1309
PR1309
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 200mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior access Lumbar T10-L5 w/Sacrum
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This Bed is 60 mm lower to the caudal side than PR1309. Spine model is NOT included in delivery.
PR1309.01
PR1309.01
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 140 mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior a/ anterior access C1-T1 w/Occ
Cervical Spine bed for posterior and anterior access. Holds spine models from C1 - T1 with Occiput. Spine model is NOT included in delivery.
PR1230
PR1230
- Orientationneutral
- Model Typeintact
- Dimensions301 x 200 x 180mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine lumbar L1-L5 w/ sacrum, spinous ligament a/ flava
Lumbar Spine L1 to Sacrum with continuous supra interspinous ligaments, continuous flava and nerves.
LSS9351
LSS9351
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialBones: Solid foam LSS cancellous bone density. Disk: soft flexible foam. Ligaments: RUR
- DeliveryDelivery time upon request
PRINT
Skull hollow fractured w/mandible a/vise attachment
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and attached intact mandible. Without Easy Clip mechanism
8824
8824
- Orientationneutral
- Model Typefractured
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Spine thoracal lumbar T9-L4 fractured
Fractured large thoracic lumbar Spine section from T9 to L4
LD9381
LD9381
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class52.12.B3, 53.1.B3
- DimensionsOverall length: 273mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine T10-L5 w/ Sacrum and Muscles
Lumbar Spine from T10 to Sacrum with bilateral multifidus and erector Spine muscles
LD9370.0
LD9370.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam low density. Disk: soft flexible foam Muscles: soft PUR
- DeliveryDelivery time upon request
PRINT
LSS9370.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk and Muscles: soft flexible foam
- DeliveryDelivery time upon request