PRINT
Large lumbar Spine from T10 to Sacrum
CHF 176.30
LDPR0967
Orientation neutral Model Type fractured AO/OTA FX Class 53.1 Dimensions Overall length: 420mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This bed is 60 mm higher to the caudal side than PR1309.01. Spine model is NOT included in delivery.
CHF 178.20
PR1309
Orientation neutral Model Type intact Dimensions 500 x 200 x 200mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This Bed is 60 mm lower to the caudal side than PR1309. Spine model is NOT included in delivery.
CHF 178.20
PR1309.01
Orientation neutral Model Type intact Dimensions 500 x 200 x 140 mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Cervical Spine bed for posterior and anterior access. Holds spine models from C1 - T1 with Occiput. Spine model is NOT included in delivery.
CHF 179.30
PR1230
Orientation neutral Model Type intact Dimensions 301 x 200 x 180mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Lumbar Spine L1 to Sacrum with continuous supra interspinous ligaments, continuous flava and nerves.
CHF 179.30
LSS9351
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Bones: Solid foam LSS cancellous bone density. Disk: soft flexible foam. Ligaments: RUR Delivery Delivery time upon request
PRINT
Fractured large thoracic lumbar Spine section from T9 to L4
CHF 179.70
LD9381
Orientation neutral Model Type fractured AO/OTA FX Class 52.12.B3, 53.1.B3 Dimensions Overall length: 273mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine from T10 to Sacrum with bilateral multifidus and erector Spine muscles
CHF 180.30
LD9370.0
Orientation neutral Model Type intact Dimensions Overall length: 420mm Material Solid foam low density. Disk: soft flexible foam Muscles: soft PUR Delivery Delivery time upon request
PRINT
Lumbar Spine from T10 to Sacrum with muscles
CHF 180.30
LSS9370.0
Orientation neutral Model Type intact Dimensions Overall length: 420mm Material Vertebrae and Sacrum Solid foam LSS cancellous density, Disk and Muscles: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracal lumbar Spine from T2 to L2
CHF 181.60
LSS9385
Orientation neutral Model Type intact Dimensions Overall length: 380 mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracal Spine section from T2 to L2
CHF 181.60
LD9385
Orientation neutral Model Type intact Dimensions Overall length: 380 mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from T10-L5 and Sacrum
CHF 183.45
LDPR0770
Orientation neutral Model Type intact Dimensions Length: 390mm Material Sacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from T10-L5 to Sacrum with Pelvis, with flex rod and pre-drilled pedicle holes
CHF 184.35
LD9371.7
Orientation neutral Model Type intact Dimensions Overall length: 495mm, Width: 300mm, Pedicle hole diameter: 5.0mm Material Cortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from T10-L5 to Sacrum with Pelvis and flex rod
CHF 184.35
LSS9371.7
Orientation neutral Model Type intact Dimensions Overall length: 495mm, Width: 300mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Cervical Spine with occipital bone, vertebrae C1 toT1, sewable spinal cord with dura mater and with radiopaque coating
CHF 186.65
LD9391.8.9
Orientation neutral Model Type intact Dimensions Overall length: 265mm Material Occiput: solid foam, C1 to T1: Solid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE Delivery Delivery time upon request
PRINT
X-ray PDF file from 1156.1 Knee fractured Tibia with MCL,LCL,PCL and Patella
CHF 190.40
1156.XRF
Orientation right Model Type fractured AO/OTA FX Class 41B2.1, 41C1.1 Dimensions Overall length: 840 mm. Canal diameter: Femur 9.5mm , Tibia 8 mm Material X-Ray File Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine from T10 to Sacrum with radiopaque coating
CHF 193.80
LD9370.9
Orientation neutral Model Type intact Dimensions Overall length: 420mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with radiopaque coating
CHF 195.45
LDPR1232.10.9
Orientation neutral Model Type intact Dimensions Overall length: 230mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine bed for anterior access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 196.05
PR1310
Orientation neutral Model Type intact Dimensions 500 x 200 x 160mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Lumbar Spine bed for lateral access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 196.05
PR1308
Orientation neutral Model Type intact Dimensions 500 x 200 x 100mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Cervical thoracal Spine with occipital bone, vertebrae C1 to T4 with ankylosing spondylitis C6 to T1 and with vertebral arteries
CHF 205.70
LD9389
Orientation neutral Model Type malunion, pathologic Dimensions Overall length: 345mm Material Occiput: Solid foam, C1 to T4: Solid foam low density, Disc: partial solid not flexible Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with spinal cord and nerves, ligaments, and flava
CHF 207.70
LD9379.60
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam Low Density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
CHF 207.70
LSS9379.60
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber Delivery Delivery time upon request
PRINT
Canine large Lumbar Spine with sacrum, vertebrae from L5 to sacrum. 3D-printed
CHF 218.30
0739.3D
Orientation neutral Model Type intact Dimensions Overall length: 183mm Material ABS Delivery Ready to shop within 15 working days
PRINT
Right Knee with Femur, fractured Tibia, Patella, rubber PCL and soft tissue with intermuscular fascia
CHF 222.75
1156.1
Orientation right Model Type fractured AO/OTA FX Class 41B2.2, 41C1.1 Dimensions Overall length: 840 mm. Canal diameter: Femur 9.5mm , Tibia 8 mm Material Femur and Tibia: Cortical / hard cancellous bone Foam caot: PUR foam soft Delivery Ready to ship within 15 working days