Showing 121–144 of 199 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Spine lumbar L1-L5 w/ Pelvis hemi Iliac w/ radiopaque coating
Lumbar Spine from L1 to Sacrum and hemi Iliac white radiopaque coating
LDPR1534.9
LDPR1534.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialSolid foam low density. Disk: soft flexible foam Hemi-Iliac: solid foam
- DeliveryDelivery time upon request
PRINT
LDPR0967
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class53.1
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access Lumbar T10-L5 w/Sacrum
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This bed is 60 mm higher to the caudal side than PR1309.01. Spine model is NOT included in delivery.
PR1309
PR1309
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 200mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior access Lumbar T10-L5 w/Sacrum
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This Bed is 60 mm lower to the caudal side than PR1309. Spine model is NOT included in delivery.
PR1309.01
PR1309.01
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 140 mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior a/ anterior access C1-T1 w/Occ
Cervical Spine bed for posterior and anterior access. Holds spine models from C1 - T1 with Occiput. Spine model is NOT included in delivery.
PR1230
PR1230
- Orientationneutral
- Model Typeintact
- Dimensions301 x 200 x 180mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine lumbar L1-L5 w/ sacrum, spinous ligament a/ flava
Lumbar Spine L1 to Sacrum with continuous supra interspinous ligaments, continuous flava and nerves.
LSS9351
LSS9351
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialBones: Solid foam LSS cancellous bone density. Disk: soft flexible foam. Ligaments: RUR
- DeliveryDelivery time upon request
PRINT
Spine thoracal lumbar T9-L4 fractured
Fractured large thoracic lumbar Spine section from T9 to L4
LD9381
LD9381
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class52.12.B3, 53.1.B3
- DimensionsOverall length: 273mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine T10-L5 w/ Sacrum and Muscles
Lumbar Spine from T10 to Sacrum with bilateral multifidus and erector Spine muscles
LD9370.0
LD9370.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam low density. Disk: soft flexible foam Muscles: soft PUR
- DeliveryDelivery time upon request
PRINT
LSS9370.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk and Muscles: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSS9385
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 380 mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LD9385
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 380 mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 Sacrum
Lumbar Spine designed specifically for vertebroplasty application with open cell structures, from T10-L5 and Sacrum
LDPR0770
LDPR0770
- Orientationneutral
- Model Typeintact
- DimensionsLength: 390mm
- MaterialSacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 w/ Pelvis a/ Flex Rod
Lumbar Spine from T10-L5 to Sacrum with Pelvis, with flex rod and pre-drilled pedicle holes
LD9371.7
LD9371.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm, Pedicle hole diameter: 5.0mm
- MaterialCortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 w/ Pelvis a/ Flex Rod
Lumbar Spine from T10-L5 to Sacrum with Pelvis and flex rod
LSS9371.7
LSS9371.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine cervical C1-T1 Occiput w/ spinal cord a/ radiopaque coating
Cervical Spine with occipital bone, vertebrae C1 toT1, sewable spinal cord with dura mater and with radiopaque coating
LD9391.8.9
LD9391.8.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: solid foam, C1 to T1: Solid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 Sacrum w/ radiopaque coating
Lumbar Spine from T10 to Sacrum with radiopaque coating
LD9370.9
LD9370.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 Sacrum w/ radiopaque coating
Lumbar Spine from L1 to Sacrum with radiopaque coating
LDPR1232.10.9
LDPR1232.10.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 Sacrum w/ radiopaque coating to fit LDPR1313 Holder
Lumbar Spine from L1 to Sacrum with radiopaque coating
LDPR1313.10.9
LDPR1313.10.9
- Orientationneutral
- Model Typeintact
- DeliveryDelivery time upon request
PRINT
Spine bed anterior access Lumbar T10 -L5 w/Sacrum
Lumbar Spine bed for anterior access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1310
PR1310
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 160mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed lateral access Lumbar T10-L5 w/ Sacrum
Lumbar Spine bed for lateral access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1308
PR1308
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 100mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine cervical thoracal C1-T4 Occiput ankylosed
Cervical thoracal Spine with occipital bone, vertebrae C1 to T4 with ankylosing spondylitis C6 to T1 and with vertebral arteries
LD9389
LD9389
- Orientationneutral
- Model Typemalunion, pathologic
- DimensionsOverall length: 345mm
- MaterialOcciput: Solid foam, C1 to T4: Solid foam low density, Disc: partial solid not flexible
- DeliveryDelivery time upon request
PRINT
Spine L1-L5 w/ Sacrum w/ Spinal Cord, Nerves a/ Flava
Lumbar Spine from L1 to Sacrum with spinal cord and nerves, ligaments, and flava
LD9379.60
LD9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Spine L1-L5 w/ Sacrum, Spinal Cord, Nerves and Flava
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
LSS9379.60
LSS9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Pelvis a/ radiopaque coating
Spine with L1-Sacrum and Pelvis with radiopaque coating
LDPR1335.9
LDPR1335.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 350mm
- MaterialCortical low density foam. Hemi-Pelvis: Solid foam. Dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days