Showing 25–48 of 93 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
LSS9371
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine holder compact
Spine holder compact with flexible center block and rubber bands for fixation of rather short Spine segments for training.
0029
0029
- Orientationneutral
- Model Typeintact
- DimensionsLength: 280mm, Width: 100mm, Height: 125mm
- MaterialHPL and POM
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Skin replacement part for Skull
Skin replacement part for Skull ( Series 82xx, 87xx, 88xx) with magnetic closure
8800.H
8800.H
- Orientationneutral
- Model Typeintact
- DimensionsLength: 230mm Width: 180mm Depth:220 mm
- MaterialSkin: Silicone shore 00-30
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Bone Clamp w/o table clamp
Bone Clamp without table clamp. This SYNBONE Bone Clamp can be fixed to any SOLID table clamp available on the market. See pdf for instruction for use. Bone models are not included in delivery.
PR0734.60
PR0734.60
- Orientationneutral
- Model Typeintact
- DimensionsLength: 19cm. Width: 8cm Height: 19.5cm
- MaterialIron
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LDPR1335
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 350mm
- MaterialCortical low density foam. Hemi-Pelvis: Solid foam. Dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 w/ Sacrum and Muscles
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
LSS9379.0
LSS9379.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam LSS cancellous bone density, Disk: soft flexible foam, Muscles: soft PUR
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Sacrum and Muscles
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
LD9379.0
LD9379.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam low density. Disk: soft flexible foam Muscles: soft PUR
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Pelvis hemi Iliac
Lumbar Spine from L1 to Sacrum and Pelvis hemi Iliac
LSSPR1534
LSSPR1534
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialVertebra & Pelvis:Solid foam LSS cancellousbone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Pelvis hemi Iliac
Lumbar Spine section from L1 to Sacrum and Pelvis hemi Iliac
LDPR1534
LDPR1534
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialSolid foam low density. Disk: soft flexible foam Hemi-Iliac: solid foam
- DeliveryDelivery time upon request
PRINT
Spine cervical C1-T1 Occiput w/sublux a/arteries
Cervical Spine with Occipital Bone, vertebrae C1 to T1 with subluxation of C1-C2 and arteries
LD9392
LD9392
- Orientationneutral
- Model Typepathologic
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Spine lumbar w. spondylolysis
Lumbar Spine from L1 to Sacrum with spondylolisthesis at L5/Sacrum
LD9376
LD9376
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam low density. Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Sacrum, pre-drilled pedicle hole, a/ spinal cord
Lumbar Spine from L1-L5 with Sacrum, pre-drilled pedicle hole and sewable spinal cord with dura mater
LSSPR1423.8
LSSPR1423.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm. Diameter pedicle holes: 5.5mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam, Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
LD9370
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine cervical C1-T1 Occiput w/ spinal cord
Cervical Spine with Occiput, vertebrae C1 to T1 with sewable spinal cord and dura mater
LSS9391.8
LSS9391.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Spine cervical C1 – C7 w/ spinal cord
Cervical Spine from C1 to C7 with sewable spinal cord and dura mater
LSS9399.8
LSS9399.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam, dura mater: PE hose
- DeliveryDelivery time upon request
PRINT
Spine thoracal lumbar T10-L2 w/ T11 wedge fracture
Fractured thoracic lumbar Spine section from T10 to L2 with T11 wedge fracture
LD9368
LD9368
- Orientationneutral
- Model Typefractured
- DimensionsOverall length: 210mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSS9370
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 Sacrum w/ spinal cord
Lumbar Spine from L1 to Sacrum with pre-drilled pedicle holes, with sewable spinal cord with dura mater
LDPR1423.8
LDPR1423.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm. Diameter pedicle holes: 5.5mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 Sacrum w/ spinal cord
Lumbar Spine from L1 to Sacrum with sewable spinal cord and dura mater
LSS9379.8
LSS9379.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam LSS concellous bone density, Disk: soft flexible foam Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
LSS9380
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialVertebrae: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Hand and wrist right solid fractured malunion
Right solid Hand and wrist with a fracture on Ulna malunion and various marked fractures on Radius and Metacarpals and Phalanges.
PR1116
PR1116
- Orientationright
- Model Typefracture-line marked, fractured, malunion
- DimensionsOverall length: 448mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSSPR1232.10
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Generic sphere 7mm
Hollow sphere consists of 2 glued 2 hemi-spheres with a wall thickness of 7mm
PR0110.20
PR0110.20
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 7mm. Weight: 400g +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Generic sphere 5mm
Hollow sphere consists of 2 glued hemi-spheres with a wall thickness of 5mm
PR0112
PR0112
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 5mm. Weight: 430g +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 10 working days