PRINT
Right small Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, PCL and notch
CHF 43.60
LSH1880.NH
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 830mm, Condylar width: 73mm, Tibial plateau width: 74mm Canal diameter: Femur 12mm, Tibia 10mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 10 working days
PRINT
Right small Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, PCL and notch
CHF 43.60
LS1880.NH
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 830mm, Condylar width: 73mm, Tibial plateau width: 74mm Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 10 working days
PRINT
Large lumbar vertebra with pre-drilled pedicular canal, filled with open cell foam and covered with a transparent foil
CHF 43.20
PR1010
- Orientationneutral
- Model Typeintact
- DimensionsTransverse process width: 98mm. Pedicular drill hole diameter: 4.6mm
- MaterialVertebra: Solid foam. Foam Inlay: open cell PPI 20 soaked with Acryl
- DeliveryReady to ship within 15 working days
PRINT
Generic plate, coated with a rubber skin
CHF 44.85
PR0113.G
- Orientationneutral
- Model Typeintact
- DimensionsDimension: 250 x 250 x 5mm, Weight: 250g +/- 5%
- MaterialModified bone-like polyurethane coated with a rubber skin
- DeliveryReady to ship within 15 working days
PRINT
Generic plate, coated with a rubber skin
CHF 44.85
PR0114.G
- Orientationneutral
- Model Typeintact
- DimensionsDimension: 250 x 250 x 6mm, Weight: 300g +/- 5%
- MaterialModified bone-like polyurethane coated with a rubber skin
- DeliveryReady to ship within 15 working days
PRINT
Lumbar Spine vertebrae single set from L1 to L5
CHF 44.55
LSS9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
Lumbar Spine vertebrae single set from L1 to L5.
CHF 44.55
LD9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLD material: Low density solid foam
- DeliveryDelivery time upon request
PRINT
SYNBONE foam block series 42PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 45.35
0040-42-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 41.82 PCF / 0.67 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 15-20 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 25 working days
PRINT
Cord Set for Knot Tying Workstation: Set of 25pcs, Thickness Ø2mm length 1200mm per/pcs
CHF 45.35
PR2111.25
- Orientationneutral
- Model Typeintact
- DimensionsPacked in a plastick bag: Length: 220mm Width: 160mm Height: 20mm 25 Cords: Ø: 2mm Length: 1200mm
- MaterialPolyester
- DeliveryReady to ship within 15 working days
PRINT
Left Equine Radius and Ulna
CHF 46.70
0110
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 440mm. Radius thickness: 30x40mm
- MaterialCortical / cancellous bone
- DeliveryReady to ship within 30 working days
PRINT
SYNBONE foam block series 50 PCF in defined dimensions
CHF 46.95
0040-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 20 PCF in defined dimensions
CHF 47.90
0040-20-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183), Compressive strength: 8-12 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
Generic block with 28 holes
CHF 47.50
PR1428
- Orientationneutral
- Model Typeintact
- DimensionsLength: 70mm, Width: 70mm, Height: 50mm, Density:0.2 Kg/dm3, 28 holes: Ø3.2mm deep 50mm
- MaterialPUR foam gray colour
- DeliveryReady to ship within 15 working days
PRINT
Implant Replica Femur Component Posterior-Stabilized size 5 left SYNBONE generic geometry
CHF 48.80
0028.15.PS
- Orientationleft
- Model Typeintact
- DimensionsSize 5 left: Condylar width: 66.5mm Replica depth: 62.5mm Replica height: 53.4mm
- MaterialSLS: DF-HST and with two metal pins
- DeliveryReady to ship within 15 working days
PRINT
Left large Knee assembled with femur, tibia, patella and slightly rope ligaments LCL, MCL, ACL, PCL
CHF 50.00
LSH1801.03
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm, Condylar width: 82mm Tibia plateau width: 78mm Canal diameter: Femur 12mm, Tibia 10mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 10 working days
PRINT
Left large Knee assembled with femur, tibia, patella and slightly rope ligaments LCL, MCL, ACL, PCL, with notch
CHF 50.00
LSH1801.03.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm, Condylar width: 82mm Tibia plateau width: 78mm Canal diameter: Femur 12mm, Tibia 10mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 10 working days
PRINT
Left medium Knee assembled with femur, tibia, patella and slightly rope ligaments LCL, MCL, ACL, PCL, with notch
CHF 50.00
LSH2051.03.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 10 working days
PRINT
Right Knee with slightly stretchy rope ligaments ACL, PCL and patella
CHF 50.00
LDPR1715
- Orientationright
- Model Typeintact
- DimensionsOverall length: 835 mm. Femur: Condylar width: 86 mm. Neck angle: 135°. Anteversion:
- MaterialCortical soft density / low cancellous bone structure
- DeliveryReady to ship within 15 working days
PRINT
Left large Femur prepared for Stem replica size 14 to perform an ETO stem revision, with notch
CHF 51.00
LSH2335.02.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 460mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm, Prepared for Corail Stem replica size 14
- MaterialFemur: Cortical hard density / low cancellous bone structure
- DeliveryReady to ship within 25 working days
PRINT
Left Hemi-Pelvis with left femur and vice attachment, Acetabular diameter 48mm
CHF 51.95
PR1307
- Orientationleft
- Model Typeintact
- DimensionsAcetabular: diameter: 48mm / Femur: Length: 425mm. Condylar width: 73mm. Neck angle: 130°. Anteversion: 18°. Head diameter: 44mm. Canal diameter: 12mm
- MaterialHemi Pelvis: Solid foam, light dense cancellous bone. Femur: Cortical soft density / low cancellous bone structure
- DeliveryReady to ship within 15 working days