Showing 1–24 of 260 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
ROB Knee Holder System without transportation case
ROB Knee Holder System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left. In single use transportation packaging only.
0037.01
0037.01
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System without transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In duffle bag transportation packaging
0037.05
0037.05
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Set of 24 pieces of left large knee with varus (3°-7°) assembled with soft cortical femur and tibia, with ligament balancing collateral ligaments, and slightly stretchy cruciate ligaments.
LS1816.36.NH.24
LS1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL hard cortical a/ notch
Set of 24 PCS of LSH1816.36.NH
LSH1816.36.NH.24
LSH1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder System with transportation case
ROB Knee Holder System for Arthroplasty workshops to hold the various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left and solid transportation case with foam inlays.
0037
0037
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm Case: Length: 525mm, Width: 450mm, Height: 235mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System with transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In a solid transportation case with foam inlays.
0037.06
0037.06
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 m, Case: length: 607 mm, width: 475 mm, depth: 275 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Hip Holder System incl. transportation case
Hip Holder System with Hemi-Pelvis Clamp and Femur Sleeve Clamp. Designed for Total Hip Arthroplasty workshops and trainings. Delivered in a solid transportation case with foam inlays.
0031
0031
- DimensionsHip Holder: Length: 245mm Width: 190mm Height: 301mm Case: Length: 525mm, Width: 450mm, Height: 235mm
- MaterialHolder: Aluminum transparent anodized Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Humerus right pre-drilled
Right Humerus with distal drill hole for intramedullary nailing and prosthesis
LSPR0349
LSPR0349
- Orientationright
- Model Typeintact
- DimensionsLength: 326mm. Shaft diameter: 22mm. Head diameter: 47mm. Drill hole diameter: 9mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Humerus left pre-drilled Ø10mm distal sealed
Left Humerus with pre-drilled canal Ø10mm and distal sealed
LS5300.01
LS5300.01
- Orientationleft
- Model Typeintact
- DimensionsLength: 340mm, Shaft diameter: 20mm, Head diameter: 54mm, Canal diameter: 10mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS2330
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 425mm, Condylar width: 73mm, Neck angle: 130°, Anteversion: 16°, Head diameter: 44mm, Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS2335
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 474mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS1385
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 416mm, Tibia plateau width: 78mm, Canal diameter: 10mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS2330.01
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 425mm. Condylar width: 73mm. Neck angle: 130°. Anteversion: 16°. Head diameter: 44mm. Canal diameter: 14mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur small left recon w/ notch
Left small Femur with pre-drilled canal with Ø12mm distal sealed with notch
LS2330.NH
LS2330.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 425mm, Condylar width: 73mm, Neck angle: 130°, Anteversion: 16°, Head diameter: 44mm, Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon w/ notch
Left large Femur with pre-drilled Ø12mm canal on distal side sealedand notch
LS2335.NH
LS2335.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength 474 mm, Condylar width: 82 mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12 mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS2340
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 450mm. Condylar width: 79mm. Neck angle: 128°. Anteversion: 11°. Head diameter: 45 mm. Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur medium left recon w/ notch
Left medium Femur with pre-drilled Ø12mm canal on distal side sealed with notch
LS2340.NH
LS2340.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 450mm. Condylar width: 79mm. Neck angle: 128°. Anteversion: 11°. Head diameter: 45 mm. Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSH2335
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 474mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSH1385
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 416mm. Tibial plateau width: 78mm. Canal diameter: 10mm
- MaterialCortical hard density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS1365
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 397mm. Tibial plateau width: 74mm. Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Tibia medium left recon w/ notch
Left medium Tibia with pre-drilled canal Ø12mm and distal opening with notch
LS1365.NH
LS1365.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 397mm. Tibial plateau width: 74mm. Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS2330.02
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 425mm. Condylar width: 73mm. Neck angle: 130°. Anteversion: 16°. Head diameter: 44mm. Canal diameter: 16mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS2345
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 455mm. Condylar width: 77mm. Neck angle: 130 °. Anteversion: 11°. Head diameter: 45 mm. Canal diameter: 14mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur medium left recon w/ notch
Left medium Femur with pre-drilled Ø14mm canal on distal side sealed and notch
LS2345.NH
LS2345.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 455mm. Condylar width: 77mm. Neck angle: 130 °. Anteversion: 11°. Head diameter: 45 mm. Canal diameter: 14mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days