Showing 217–240 of 909 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Hemi-Pelvis right w/ vise attachment Ø55mm
Right Hemi-Pelvis with vice attachment, Acetabular diameter 55mm
4010
4010
- Orientationright
- Model Typeintact
- DimensionsAcetabular diameter: 55mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LDPR1212
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 290mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
1350
- Orientationleft
- Model Typeintact
- DimensionsLength: 385mm, Tibia plateau width: 74mm, Shaft diameter: 28mm, Canal diameter: 8mm
- MaterialCortical / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium left recon w/ LCL, MCL, ACL, PCL
Left medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, and ACL, PCL
LS2001.01
LS2001.01
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 77mm. Tibia plateau width:76mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical soft density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1105
- Orientationneutral
- Model Typeintact
- Dimensions10 x 10 x 20mm
- MaterialCancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1232.15
- Orientationneutral
- Model Typeintact
- DimensionsLength: 280mm, Width: 200mm, Thickness: 1mm
- Materialartificial leather
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
5250
- Orientationleft
- Model Typeintact
- DimensionsLength: 170mm. Shaft Diameter: 16mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Meniscus Puck intact w/ cruciform ligaments a/ simulated Tibial Plateau
Meniscus Puck intact made with silicon, fabric matrix, raised cruciform ACL, PCL and simulated rigid tibila plateau.
PR2122
PR2122
- Orientationleft
- Model Typeintact
- DimensionsLength: 95mm Width: 53mm Height: 15mm
- MaterialSilicone with fabric matrix
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Shoulder left recon w/vice attachment
Left Shoulder with scapula, clavicle, humerus, ligaments, cancellous humeral head, and cancellous under glenoid surface. With vice attachment. Designed for joint reconstruction workshops
LSH5760
LSH5760
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 430mm Drill hole diameter: distal 6mm
- MaterialClavicula : Solid Foam. Humeurs with cancellous head. Scapula with cancellous under glenoid surface.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine cervical C1-T1 w/ Occiput a/ vice attachment
Cervical Spine with Occiput, vertebrae C1 to T1 and wooden vice attachment
LSS9390
LSS9390
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 360mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
0040-30-01
- Orientationneutral
- Model Typeintact
- Dimensions110mm x 110mm x 40mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
PR1539
- Orientationneutral
- Model Typeintact
- Dimensions100 x 100 x 15mm, Density: 0.19g/ccm
- MaterialLight cortical bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9377.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Foam Block 15 PCF 150x100x50 2nd layer 3mm 50PCF
SYNBONE foam block series 15PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
0040-15-50-02
0040-15-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 15 PCF / 0.24 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 2-4 MPa; 40-45 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
0040-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Dome Foam Block 12.5PCF w/ Generic Rotator Cuff
Dome Foam Block 12.5PCF with Generic Rotator Cuff (2mm suturable fabric) = Ø76mm x 52mm
0072
0072
- Orientationneutral
- Model Typeintact
- DimensionsØ 76mm; Height: 53mm; Generic Rotator Cuffs 2mm
- MaterialDome: PU 12.5 PCF Generic Rotator Cuffs: PU laminated with fabric
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hand and wrist right single bone w/soft tissue
Intact right single bone Hand with Radius, Ulna and soft tissue with intermuscular fascia. Major structures as nerves, muscles, vessels and tendons attached. With canals in the area of Metacarpal bones and Proximal Phalanx.
9060.2
9060.2
- Orientationright
- Model Typeintact
- DimensionsOverall length: 460mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 w/ Sacrum, Spinal Cord a/ Nerves
Lumbar Spine from T10 to Sacrum with spinal cord and nerves
LSS9370.6
LSS9370.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam, Nerves: foam soft
- DeliveryDelivery time upon request
PRINT
PR0057
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 6mm. Weight: 250g +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
0040-50-01
- Orientationneutral
- Model Typeintact
- Dimensions110mm x 110mm x 40mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Skull Brain Dura w/ cranial vise attachment
Skull with special cranial vise attachment, frontal sinus, maxillary sinus, septum, Brain with ventricle insides and Dura. Without Mandible
8765.30
8765.30
- Orientationneutral
- Model Typeintact
- DimensionsSkull width: 149mm. Length: 235mm. Height: 161mm
- MaterialSkull: Solid foam Brain: Soft foam PUR Dura: elastic PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
4033
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 54mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium right recon w/ LCL, MCL, ACL, PCL
Right medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, and ACL, PCL
LS2081.01
LS2081.01
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical soft density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
LD9320.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 660mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request