Showing 817–840 of 928 resultsSorted by price: low to high
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Skull hollow w/ mandible, muscles a/ vise attachment
Hollow Skull with vise attachment and muscles, with attached mandible. Without Easy Clip mechanism
8820.0
8820.0
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam, Muscle: PUR red
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hip left acetabulum Ø50mm medium femur a/ sacrum w/ soft tissue window velcro
Left Total Hip Replacement joint reconstruction model using hemi pelvis and femur, suitable for Direct Anterior Approach (DAA)
LSHPR1720.1
LSHPR1720.1
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 595mm. Canal diameter: 14mm
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hip left acetabulum Ø50mm a/ medium femur sacrum w/ soft tissue
Left Total Hip Replacement joint reconstruction model using hemi pelvis and femur, suitable for Direct Anterior Approach (DAA)
LSHPR1721.1
LSHPR1721.1
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 595mm. Canal diameter: 14mm
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR2461.01.SET
- Orientationneutral
- Model Typeintact
- Dimensions154mm x 154mm x 6mm, Tolerances: +/-0.5mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
PRINT
Spine L1-L5 w/ Sacrum w/ Spinal Cord, Nerves a/ Flava
Lumbar Spine from L1 to Sacrum with spinal cord and nerves, ligaments, and flava
LD9379.60
LD9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Spine L1-L5 w/ Sacrum, Spinal Cord, Nerves and Flava
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
LSS9379.60
LSS9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Skull hollow w/ mandible, muscles e/clip a/ vise attachment
Hollow Skull with vise attachment and muscles, with attached mandible. With Easy Clip mechanism
8860.0
8860.0
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam, Muscle: PUR red
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 w/ Pelvis a/ radiopaque coating
Spine with L1-Sacrum and Pelvis with radiopaque coating
LDPR1335.9
LDPR1335.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 350mm
- MaterialCortical low density foam. Hemi-Pelvis: Solid foam. Dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 w/ Pelvis a/ radiopaque coating
Spine with L1-Sacrum and Pelvis radiopaque coating
LSSPR1335.9
LSSPR1335.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 350mm
- MaterialVertebrae and Pelvis Solid foam LSS cancellous density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Canine Spine lumbar large L5 to sacrum, 3D-printed
Canine large Lumbar Spine with sacrum, vertebrae from L5 to sacrum. 3D-printed
0739-3D
0739-3D
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 183mm
- MaterialABS
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
4201.01
- Model Typeintact
- DimensionsWidth: 305mm. Height: 160mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
PR1613.25
- Model Typeintact
- DimensionsLength: 317mm. Width: 173mm. Thickness: 131mm
- MaterialPUR Foam red
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right malunion w/ soft tissue 90°
Right lower Leg with 3-part foot with tibia, fibula, calcaneus malunion, posterior structures, ligaments and 90° soft tissue with intermuscular fascia
9183.1
9183.1
- Orientationright
- Model Typeintact, malunion
- DimensionsFoot length: 257mm, Malleolar width: 67mm, Lower Leg length: 440mm, Tibia canal diameter: 8mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 w/ radiopaque coating
Lumbar Spine from T10 to L5 with radiopaque coating
LDPR1536.9
LDPR1536.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 298mm
- MaterialSpine T10-L5 cortical low density / open cell cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lower Leg right w/ 3D printed for imaging a/ soft tissue 90°
Right intact lower Leg distal with medium tibia, fibula. Intact ankle and foot. 3D Printed.
9191.1-3D
9191.1-3D
- Orientationright
- Model Typeintact
- Material3D Printed
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1232.30
- Orientationneutral
- Model Typeintact
- Dimensions294 x 204 x 170mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow w/ mandible, skin a/ vise attachment
Hollow Skull with vise attachment and attached mandible all covered with skin but without Easy Clip mechanism
8820.1
8820.1
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam, Skin: Silicone shore 00-30
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access Lumbar L1-L5 w/Pelvis
Lumbar Spine bed posterior access. Holds spine models from L1 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1329
PR1329
- Orientationneutral
- Model Typeintact
- Dimensions410 x 280 x 240mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Knot Pusher 2nd generation made of aluminium
Knot Pusher 2nd generation optimized for Ø 2-4mm Cord for Knot Tying Workstation. Recommended for SPORTS medicine educational workshops. Not for human use. Education only!
PR2201.10
PR2201.10
- Orientationneutral
- Model Typeintact
- DimensionsLength: 19.3mm Width: 44mm Outer Ø 10mm
- MaterialAluminium anodized
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Leg left soft tissue cover a/ notch access
Foam coat open, providing cavity, for the placement of medium knee with notch. Bone model is not included in scope of delivery.
PR2011.01.NH
PR2011.01.NH
- Orientationleft
- Model Typeintact
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Leg left soft tissue cover
Foam coat open, providing cavity, for the placement of medium knee. Bone model is not included in scope of delivery.
PR2011
PR2011
- Orientationleft
- Model Typeintact
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Leg right soft tissue cover
Foam coat open, providing cavity, for the placement of medium knee. Bone model is not included in scope of delivery.
PR2018
PR2018
- Orientationright
- Model Typeintact
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Leg right soft tissue cover a/ notch access
Foam coat open, providing cavity, for the placement of medium knee with notch. Bone model is not included in scope of delivery.
PR2018.01.NH
PR2018.01.NH
- Orientationright
- Model Typeintact
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed flat posterior access C1-L5 w/Sacrum
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum with slight skoliosis. Spine model is NOT included in delivery.
PR1229.10
PR1229.10
- Orientationneutral
- Model Typeintact
- Dimensions900 x 200 x 150mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days