Showing 457–480 of 1490 resultsSorted by popularity
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
LSS9385
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 380 mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Tibia large left recon
Left large Tibia with pre-drilled canal Ø10mm and distal opening
LSH1385
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 416mm. Tibial plateau width: 78mm. Canal diameter: 10mm
- MaterialCortical hard density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access Lumbar L1-L5 w/Pelvis
Lumbar Spine bed posterior access. Holds spine models from L1 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1329
- Orientationneutral
- Model Typeintact
- Dimensions410 x 280 x 240mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
LD9320
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 660mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
0800.03
- Orientationright
- Model Typeintact
- DimensionsLength: 181mm Width: 40mm Shaft diameter: 16mm
- MaterialCortical / hard cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foot 1-part right w/ Bunion Hallux valgus a/ Hammertoes
Right 1-part Foot with fused talus and calcaneus. Bunion hallux valgus of first metatarsals, hammertoes for second and fourth metatarsals. Without heel spur
PR2004
- Orientationright
- Model Typemalformation
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Equine Forelimb left w/fractures 1,2,5,6 a/ soft tissue
Equine Forelimb with all bones from distal Radius to DIP, with hoof, soft tissue and with fractures 1, 2, 5 & 6
0130.1.35
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 552mm
- MaterialSolid foam / Cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foam Block 5 PCF 150x100x50 2nd layer 3mm 50PCF
SYNBONE foam block series 5 PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
0040-5-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 5 PCF / 0.08 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 0.7 MPa; 40-45 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
PR0802
- Orientationneutral
- Model Typeintact
- Dimensions100 x 100 x 20 mm, Density: 0.35g/ccm +/- 5 %
- MaterialHard cortical bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right fractured w/ soft tissue 90°
Right lower Leg with single bone foot with tibia, fibula, fractured talus, calcaneus, fractured mid-foot bones, phalangeal bones, ligaments and 90° soft tissue with intermuscular fascia
9151.1
- Orientationright
- Model Typefractured
- AO/OTA FX Class81.2.A
- DimensionsFoot length: 257mm, Malleolar width: 67mm, Lower Leg length: 440mm, Tibia canal diameter: 8mm
- MaterialTibia: Cortical / hard cancellous bone Fibula: Solid foam Foot: Solid foam low density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Equine Forelimb left
Equine Forelimb with all bones from distal Radius to DIP without soft tissue and hoof
0100
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 527mm
- MaterialSolid foam / Cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Canine Forelimb left w/ Radius, Ulna malformation 20 degree valgus and 20 degree procurvatum a/ car
Left Canine forelimb with carpus and distal Humerus. Radius and Ulna malformation 20 degree valgus and 20 degree procurvatum.
0894.00
- Orientationleft
- Model Typemalformation
PRINT
Canine Forelimb left w/ Radius, Ulna malformation 20 degree valgus a/ 20 degree procurvatum w/ tors
Canine Forelimb left w/ Radius, Ulna malformation 20 degree valgus and 20 degree procurvatum w/ torsion a/ car
0895.00
- Orientationleft
- Model Typemalformation
- MaterialPolyurethane
PRINT
0872.02
- Orientationleft
- Model Typefractured
- DimensionsLength: 190mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access Lumbar T10-L5 w/Sacrum
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This bed is 60 mm higher to the caudal side than PR1309.01. Spine model is NOT included in delivery.
PR1309
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 200mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
PR0347
- Orientationneutral
- Model Typeintact
- DimensionsLength: 255mm +/- 0.5mm, Diameter: 12mm, Wall thickness: 3mm, Weight: 19g +/- 5%, Density: 0.87g/cm3 54 PCF +/-5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0338
- Orientationneutral
- Model Typeintact
- Dimensions100 x 50 x 50mm, Density: 0.19g/ccm
- MaterialLight cortical bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0014
- Orientationneutral
- Model Typeintact
- DimensionsLength 200 mm, cortical wall: 3mm, diameter 40mm, cancellous bone with 1 - 1.5mm pores
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
4030
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 48mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0914
- Orientationleft
- Model Typeintact
- DimensionsLength: 379mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD2380
- Orientationleft
- Model Typeintact
- DimensionsLength: 450mm. Condylar width: 85mm. Neck angle: 122°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 9.5mm
- MaterialCortical low density / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium right recon w/ patella LCL, MCL, PCL
Right medium Knee assembled with femur and tibia with slightly stretchy rope ligaments LCL, MCL, and PCL, with patella and patellar ligament
LS2080.12
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Femur medium left w/ radiopaque coating
Left medium Femur with distal canal sealed and radiopaque coating
2350.01.9
- Orientationleft
- Model Typeintact
- DimensionsNeck angle: 120°, Anteversion: 18°, Head diameter: 49mm, Canal diameter: 10mm
- MaterialCortical / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium left recon w/ LCL, MCL a/ notch
Left medium Knee assembled with Femur and Tibia and elastic rubber bands Ligaments LCL, MCL and notch
LSH1954.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 79mm. Tibia plateau width:74mm Canal diameter: Femur 12mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: rubber band
- DeliveryEst. Ready to be shipped within 10 working days