Showing 649–672 of 1490 resultsSorted by popularity
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Lower Leg right w/ Bunion Hallux valgus
Right lower Leg with single bone foot, tibia, fibula, talus, calcaneus, all mid-foot and phalangeal bones, bunion hallux valgus and ligaments
9160
- Orientationright
- Model Typeintact
- DimensionsFoot Length: 250mm. Malleolar Width: 62mm. Lower Leg Length: 440mm. Tibia canal Diameter: 8 mm
- MaterialTibia: Cortical / hard cancellous bone Fibula: Solid foam Foot: Solid foam low density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L3-L5 Sacrum w/ spinal cord a/ nerves
Lumbar Spine section from L3 to Sacrum with spinal cord, nerves, Ligaments, and Flava
LDPR1535
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam low density. Disk: soft flexible foam, Nerves: rubber
- DeliveryDelivery time upon request
PRINT
1116
- Orientationright
- Model Typeintact
- DimensionsLength: 382mm, Tibia plateau width 74mm, Shaft diameter: 25mm, Canal diameter: 9-16mm
- MaterialSolid foam, light cortical dense
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
2163
- Orientationright
- Model Typeintact
- DimensionsLength: 450mm. Condylar Width: 85mm. Neck angle: 122°. Anteversion: 15°. Head Diameter: 48mm. Canal Diameter: 9.5mm / proximal end 14mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0845.00
- Orientationright
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialHemi-Pelvis: solid foam Femur: Cortical / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Generic bone w/ midline slit
Generic bone with single midline slit cut into both ends. Outer Ø 25mm and inner Ø 16mm
0056
- Orientationneutral
- Model Typecut
- DimensionsTube diameter: 25mm, Canal diameter: 16mm, Length: 400mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee medium left recon w/ LCL, MCL, ACL, PCL, patella a/ notch
Left medium Knee assembled with femur, tibia, patella and slightly rope ligaments LCL, MCL, ACL, PCL, with notch
LSH2051.03.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Mandible w/ partial tooth removal a/ Easy Clip
Mandible with partial tooth removal and Easy Clip mechanism. Minimal order quantity 20 pcs.
8969
- Orientationneutral
- Model Typemalformation
- DimensionsMandible width: 115mm
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Canine Elbow right
Right Canine Elbow with Humerus, Radius, Ulna and major ligaments
0802.00
- Orientationright
- Model Typeintact
- DimensionsOverall length: 340mm
- MaterialSolid foam. Humerus: cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large left recon w/ LCL, MCL, ACL, PCL a/ notch
Left large Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, ACL, PCL with notch
LSH1801.01.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm. Condylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee large right recon w/ LCL, MCL, PCL
Right large Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, and PCL
LSH1780
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 895mm. Condylar width: 95mm. Tibia plateau width: 88mm Canal diameter: Femur 15mm, Tibia 10mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee medium right recon w/ LCL, MCL, PCL
Right medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, and PCL
LS2080
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical soft density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee large left recon w/ LCL, MCL, ACL, PCL, patella
Left large Knee assembled with femur, tibia, patella and slightly rope ligaments LCL, MCL, ACL, PCL
LSH1801.03
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm. Condylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Malleolus right fractured w/ entire tibia
Right Malleolus with entire tibia, distal fibula and membrana interossea. With multiple fractures
3130
- Orientationright
- Model Typefractured
- AO/OTA FX Class41B, 43B2, 4FA2 (C), 43C1.2
- DimensionsTibia: Length: 387 mm, Tibia plateau Width: 74 mm, Shaft diameter: 27 mm, Canal diameter: 8mm, Fibula: Length: 205mm Canal Diameter: 3.5mm to 7mm
- MaterialTibia: Cortical / hard cancellous bone, Fibula: solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hand and wrist right single bone
Intact right single bone Hand with flexible joints and Radius and Ulna. With canals in the area of Metacarpal bones and Proximal Phalanx. Ideal for joint reconstruction and plating and screwing.
9060
- Orientationright
- Model Typeintact
- DimensionsOverall length: 460mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 Sacrum w/ spinal cord
Lumbar Spine from L1 to Sacrum with sewable spinal cord and dura mater
LSS9379.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam LSS concellous bone density, Disk: soft flexible foam Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Canine Puppy Femur right small w/ 3 physeal fractures
Right Canine Puppy Femur, small size with 3 physeal fractures
0829.00
- Orientationright
- Model Typefractured
- DimensionsOverall length: 120mm Head diameter: 14-17mm Condylar width: 28mm
- MaterialSolid foam: soft density
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Skull hollow fractured w/mandible a/vise attachment
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and attached fractured mandible. Without Easy Clip mechanism
8823
- Orientationneutral
- Model Typefractured
- MaterialSkull and Mandible: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foam Block 20 PCF 130x85x40
SYNBONE foam block series 20 PCF in defined dimensions
0040-20-10
- Orientationneutral
- Model Typeintact
- Dimensions113mm x 85mm x 40mm Tolerances +/-1.2mm customer-specific size
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183), Compressive strength: 8-12 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Knee right fractured w/ soft tissue
Right Knee with fractured Femur, Tibia, Patella. Soft tissue with intermuscular fascia and window
PR1614.1
- Orientationright
- Model Typefractured
- AO/OTA FX Class32A1
- DimensionsOverall length: 840mm, Femur canal diameter 9,5mm
- MaterialFemur and Tibia: Cortical / soft cancellous bone, Patella: Solid foam, Soft tissue: PUR foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow w/ vise attachment
Hollow Skull with vise attachment, frontal sinus, maxillary sinus and septum. Without Easy Clip mechanism. Without mandible
8800
- Orientationneutral
- Model Typeintact
- DimensionsSkull width: 149mm. Length: 235mm. Height: 161mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine C1-L5 Occiput Sacrum
Spine with occipital bone, all Vertebrae, Sacrum and vertebral arteries
LD9310
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 855mm
- MaterialSolid foam low density. Occiput: Solid foam. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Soft tissue cover for Knee right
Right soft tissue cover for Knee with 60° flexion angle and velcro straps to close when mounted on the model. With intermuscular fascia
PR1150
- Orientationright
- Model Typeintact
- DimensionsOverall length: 430mm
- MaterialFoam Coat: PUR foam soft
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Humerus left recon
Left Humerus recon with pre-drilled canal and distal opening. Designed for joint reconstruction workshops
LSH5350
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 365mm. Shaft Diameter: 22mm. Head Diameter: 47mm. Drill Hole: 8m
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days