Showing 745–768 of 1490 resultsSorted by popularity
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
RAY Knee Holder adapter set for HTO
RAY Knee Holder adapter set consisting of a proximal and distal part for high tibia osteotomie (HTO) workshops
0027.30
- DimensionsLength:110mm Width: Ø 40mm Height: 66mm
- MaterialSLS DF-HST
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Bone Clamp w/o table clamp
Bone Clamp without table clamp. This SYNBONE Bone Clamp can be fixed to any SOLID table clamp available on the market. See pdf for instruction for use. Bone models are not included in delivery.
PR0734.60
- Orientationneutral
- Model Typeintact
- DimensionsLength: 19cm. Width: 8cm Height: 19.5cm
- MaterialIron
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0952.06
- Orientationleft
- Model Typefractured
- DimensionsLength: 100mm, shaft diameter: 7mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee small left recon w/ LCL, MCL, ACL, PCL
Left small Knee assembled with femur and tibia and slightly stretchy rope ligaments including LCL, MCL, ACL and PCL
LS1851.01
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 830mm, Condylar width: 73mm, Tibial plateau width: 74mm Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Canine paediatric Humerus left fractured
Fractured left Canine paediatric Humerus with marked physis
0852.10
- Orientationleft
- Model Typefractured
- DimensionsLength: 191mm. Shaft diameter: 17mm. Canal diameter: 8 - 10mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed lateral access Lumbar T10-L5 w/ Sacrum
Lumbar Spine bed for lateral access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1308
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 100mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
PR0112.01
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 5mm. Weight: 215g +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Foam Block 8.7 PCF 300x150x50
SYNBONE foam block series 8.7 PCF in defined dimensions
0040-8.7-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 8.7 PCF / 0.14 g/cm3 (ISO 1183), Compressive strength: 1.8-2 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine Muscle lumbar T10-L5 Sacrum
Muscle multifidus and erector spinae from T-10 to Sacrum - only muscle. Spine is not included
PR1501
- Orientationneutral
- Model Typeintact
- DimensionsLength: 363mm Width: 158mm Thickness: 45mm
- MaterialPUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur medium right w/ soft tissue
Right medium Femur with soft tissue with intermuscular fascia and mounted on wood block
PR1505.1
- Orientationright
- Model Typeintact
- DimensionsFemur Length: 450mm. Condylar width: 85mm. Neck angle: 122°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 9.5mm
- MaterialCortical low density / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Canine Hindlimb right w/ soft tissue
Right Canine Hindlimb with all bones from pelvis to the metatarsus, major ligaments and soft tissue
0806.1
- Orientationright
- Model Typeintact
- DimensionsOverall length: 620mm
- MaterialSolid foam. Femur and Tibia: cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
LDPR1220
- Orientationright
- Model Typemalformation
- DimensionsFoot length: 265mm. Foot width: 90mm.
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1608.16
- Orientationneutral
- Model Typeintact
- Dimensions42.5 x 37.2 x 16 mm
- MaterialPUR Foam blue
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1608.15
- Orientationneutral
- Model Typeintact
- DimensionsLength: 250mm. Width: 82mm. Height: 83mm
- MaterialPolyamide
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 w/ Sacrum and Muscles
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
LD9379.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam low density. Disk: soft flexible foam Muscles: soft PUR
- DeliveryDelivery time upon request
PRINT
0952.00
- Orientationleft
- Model Typeintact
- DimensionsLength: 100mm, shaft diameter: 7mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0812.05.NH
- Orientationleft
- Model Typefractured
- DimensionsLength: 215mm. Shaft diameter: 14mm. Canal diameter: 6-8 mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Spine bed posterior access w/ L1-Sacrum, muscles, radiopaque. Overall size 35 cm x 13 cm x 20 cm
Spine bed posterior access w/ radiopaque coated L1-Sacrum, muscles.
LDPR1313.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall size 35cm x 13 cm x 20 cm
PRINT
Canine Stifle right malformation w/ fused fibula meniscus a/ vise attachment
Right Canine Stifle malformed with femur, tibia, patella, menisci and ligaments, with ankle
PR2015.01
- Orientationright
- Model Typemalformation
- DimensionsOverall length: 486mm
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine Lumbar T10-L5 w/ Pelvis scoliosis, muscles and nerves
Lumbar Spine from T10-L5 with Pelvis and scoliosis, With spinal nerves and multifidus muscle
LSS9361.0
- Orientationneutral
- Model Typemalformation
- DimensionsLength: 460mm, Width: 320mm
- MaterialBone: LSS cancellous bone density, Disks: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Knot Tying Cord Set 25pcs Ø2mm x 1200mm per/pcs
Cord Set for Knot Tying Workstation: Set of 25pcs, Thickness Ø2mm length 1200mm per/pcs
PR2111.25
- Orientationneutral
- Model Typeintact
- DimensionsPacked in a plastick bag: Length: 220mm Width: 160mm Height: 20mm 25 Cords: Ø: 2mm Length: 1200mm
- MaterialPolyester
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hand and wrist right single bone w/tendons
Intact right single bone Hand with flexible joints and Radius and Ulna and with tendons
9060.11
- Orientationright
- Model Typeintact
- DimensionsOverall length: 450mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon w/radiopaque coating
Left large Femur with pre-drilled Ø12mm canal on distal side sealed and radiopaque coating
LS2335.9
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 474 mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm
- MaterialCortical soft density / low cancellous bone structure / radio-opaque coating
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0843.00
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 63mm. Length: 65mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days