Showing 913–936 of 1489 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Skull cap w/ craniotomy openings, brain a/ dura mater
Skull cap with two craniotomy openings left and right on a base plate. With soft tissue brain filler. Brain is covered with dura mater
8512.8
- Orientationneutral
- Model Typecut
- DimensionsSkull Width: 153mm. Length: 191mm. Height: 72mm
- MaterialSkull cap: Solid foam, Brain: soft foam, PUR Dura: elastic PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0549
- Orientationright
- Model Typefractured
- AO/OTA FX Class33A33C, 32A2.1
- DimensionsLength: 450 mm, Condylar width: 85 mm, canal diameter: 9.5 mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis w/ proximal femur right a/ vice attachment
Fractured right Hemi-Pelvis with proximal Femur and vice attachment
4050
- Orientationright
- Model Typefractured
- AO/OTA FX Class62A1.2
- DimensionsAcetabular diameter: 55mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg left distal w/ large tibia fibula a/ large 4 part foot. Fibula w/ canal
Left lower Leg distal large with tibia, fibula with canal and 4-part foot consisting of talus, calcaneus, forefoot sections and ligaments
9670
- Orientationleft
- Model Typeintact
- MaterialTibia & Calcaneus: Cortical density / low cancellous bone structure / Fibula Talus and , Forefoot sections: solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right distal w/ medium tibia fibula a/ medium 3 part foot. Fibula w/ canal
Right intact lower Leg distal with medium tibia, fibula. With canal and 3-part foot consisting of talus, calcaneus, forefoot sections and ligaments
9190
- Orientationright
- Model Typeintact
- MaterialTibia & Calcaneus: Cortical density / low cancellous bone structure / Fibula Talus and , Forefoot sections: solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg left large
Left lower Leg large wwith 4-part foot, tibia, fibula, talus, calcaneus and ligaments
PR0768
- Orientationleft
- Model Typeintact
- DimensionsFoot length: 280mm. Malleolar width: 62mm. Lower Leg length: 451mm. Tibia canal diameter: 12mm
- MaterialFoot bones: solid foam. Talus and Calcaneus: light dense cancellous foam. Ligaments: rubber
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee medium left revision w/ LCL, MCL a/ notch
Left medium Knee with removed primary implant with LCL, MCL and notch for revision exercises
LSH2022.11.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm Condylar width: 77mm Tibia plateau width: 76mm Canal Ø: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Brain with Dura and hematoma
Brain with ventricle insides and wrapped with a Dura and at left side a colored hematoma
8781
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 125mm. Length: 145mm. Height: 170mm
- MaterialBrain: Soft foam PUR Dura: elastic PUR with matrix
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee left w/ LCL, MCL, patella a/ tibia fractured
Left Knee with femur, tibia with proximal transverse fracture, patella and patellar ligament, slightly stretchy rope LCL, MCL ligaments
LSH1940
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 850mm. Condylar width: 79mm. Tibia plateau width:76mm Canal diameter: Femur 8mm, Tibia 10.5mm.
- MaterialCortical and foam/ low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium right recon w/ patella LCL, MCL, PCL
Right medium Knee assembled with femur and tibia with slightly stretchy rope ligaments LCL, MCL, and PCL, with patella and patellar ligament
LS2080.12
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
4201.02
- Model Typeintact
- DimensionsLength: 230mm Width: 135mm Height: 55mm
- MaterialPE foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Paediatric Femur right fractured
Paediatric Femur right proximal and distal condylar fractures.
12202
- Orientationright
- Model Typefractured
- DimensionsLength: 336mm, shaft diameter: 23mm, head diameter: 38mm, anteversion: 25°
- MaterialCortical / soft cancellous bone, dense
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Foam Block 42 PCF 300x150x50
SYNBONE foam block series 42 PCF in defined dimensions
0040-42-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density:41.82 PCF/0.67 g/cm3 (ISO 1183), Compressive strength:15-20 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
LD9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSS9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Hip left acetabulum Ø50mm a/ femur
Left Hemi-Pelvis with left Femur, mounted with rubber bands and sacrum, actabular diameter 50mm
PR1720
- Orientationleft
- DimensionsHip model femur
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Forearm right w/ distal humerus and wrist
Right Lower Arm right, distal humerus and wrist.
PR2009
- Orientationright
- Model Typeintact
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foot right single bone fractured
Right fractured single bone Foot with talus, calcaneus, all mid-foot and phalangeal bones
LDPR0836
- Orientationright
- Model Typefractured
- AO/OTA FX Class84B
- DimensionsFoot length: 257mm. Malleolar width: 67mm. Lower Leg length: 440mm
- MaterialSolid foam low density with lightly rough surface
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Generic bone to perform tibial cut w/ solid foam
Generic bone for tibial cut training
1902.102
- Orientationneutral
- Model Typeintact
- DimensionsLength: 250mm Oval Diameters: 48/77mm
- MaterialSolid soft foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Generic bone to perform tibial cut w/ cancellous part
Generic bone for tibial cut training with cortical and cancellous bone structure
1902.103
- Orientationneutral
- Model Typeintact
- DimensionsLength: 250mm; Dimensions: AP 48 mm / ML 77mm
- MaterialCortical foam with soft cancellous part
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
LDPR1319
- Orientationleft
- Model Typefractured
- AO/OTA FX Class32A, 33A2.3
- DimensionsLength: 435mm. Condylar width: 80 mm. Canal diameter: 10mm
- MaterialCortical low density / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Entire Arm left
Left Entire Arm with simple Hand, Ulna, Radius, and Humerus articulated with rubber bands
9252
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 665mm
- MaterialHumerus: Cortical low density / soft cancellous bone, Lower Arm and Hand: Solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Entire Arm right
Right Entire Arm with simple Hand, Ulna, Radius, and Humerus articulated with rubber bands
9012
- Orientationright
- Model Typeintact
- DimensionsOverall Length: 686mm
- MaterialHumerus: Cortical low density / soft cancellous bone, Lower Arm and Hand: Solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine Muscle entire C1-L5 Sacrum
Muscle multifidus and erector spinae fused from C1 to Sacrum (Spine not included in delivery)
PR1801.M
- Orientationneutral
- Model Typeintact
- DimensionsLength: 750mm, Width: 158mm, Thickness: 45mm
- MaterialPUR
- DeliveryEst. Ready to be shipped within 20 working days