Showing 1081–1104 of 1490 resultsSorted by popularity
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
ROB Knee Holder Femoral head Hemisphere Set 6 anterior posterior
ROB Knee Holder Femoral head Hemisphere Set 6 for Knee right large series with Notch LS/LSH1780.NH up to LS/LSH1799.NH
0037.40.6AP
- Orientationright
- DimensionsSphere outside diameter: 70mm
- MaterialPU
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder Femoral head Hemisphere Set 7 anterior posterior
ROB Knee Holder Femoral head Hemisphere Set 7 for Knee right medium series with Notch LS/LSH2080.NH up to LS/LSH2099.NH
0037.40.7AP
- Orientationright
- DimensionsSphere outside diameter: 70mm
- MaterialPU
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder Femoral head Hemisphere Set 8 anterior posterior
ROB Knee Holder Femoral head Hemisphere Set 8 for Knee right small series with Notch LS/LSH1880.NH up to LS/LSH1899.NH
0037.40.8AP
- Orientationright
- DimensionsSphere outside diameter: 70mm
- MaterialPU
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder Foot right
Right reference foot foam cover to be used in combination with ROB Knee Holder System
0037.20.R
- Orientationright
- DimensionsLength: 255mm, Width: 100mm, Height: 180mm Foot angle: 120°
- MaterialFoam coat
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder Rail Adapter
ROB Knee Holder Rail Adapter to attach the 2nd generation of the ROB Holder on an OR Rail or other similar Rail Systems
0037.10
- Orientationneutral
- DimensionsROB Knee Holder Rail Adapter: Maximum length: 506 mm, Width: 174.5 mm, Height: 134 mm
- MaterialAnodised aluminum, stainless steel, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System Case
ROB Knee Holder Rail System Case - solid transportation case with foam inlays
0037.95
- Orientationneutral
- DimensionsLength: 607mm, Width: 475mm, Height: 275mm
- MaterialPPC Polypropylene Copolymer
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System with transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In a solid transportation case with foam inlays.
0037.06
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 m, Case: length: 607 mm, width: 475 mm, depth: 275 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System without transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In duffle bag transportation packaging
0037.05
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System Case
ROB Knee Holder System Case - solid transportation case with foam inlays
0037.90
- Orientationneutral
- DimensionsLength: 525mm, Width: 450mm, Height: 235mm
- MaterialPPC Polypropylene Copolymer
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System with transportation case
ROB Knee Holder System for Arthroplasty workshops to hold the various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left and solid transportation case with foam inlays.
0037
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm Case: Length: 525mm, Width: 450mm, Height: 235mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System without transportation case
ROB Knee Holder System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left. In single use transportation packaging only.
0037.01
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp lig. bal. without transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.05
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036.06
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. without transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.01
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
LD9410
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam low density.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9470
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 113mm. Length: 110mm
- MaterialSolid foam low density.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSS9470
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 113mm. Length: 110mm
- MaterialSolid foam, LSS cancellous bone density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
9410
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Sacrum w/ radiopaque coating
Solid Sacrum without central nerve canal used for Spine models with radiopaque coating
LSS9470.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 113mm. Length: 110mm
- MaterialSolid foam, LSS cancellous bone density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9400
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
9400
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
5400
- Orientationleft
- Model Typeintact
- DimensionsLength: 192mm, Width: 120mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Scapula left recon
Left Scapula with cancellous bone under glenoid fossa. Hard Cortical. Designed for joint reconstruction workshops
LSH5600
- Orientationleft
- Model Typeintact
- DimensionsLength: 200mm, Width: 140mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days