Showing 1225–1248 of 1489 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Spine Holder navigation
Large Spine holder including navigations pin for large lumbar Spine L1-Sacrum
PR1608.30
- Orientationneutral
- Model Typeintact
- DimensionsLength: 294mm. Width: 204mm. Height: 170mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Spine bed posterior access C1-L5 w/Sacrum
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1229
- Orientationneutral
- Model Typeintact
- Dimensions900 x 200 x 150mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine lumbar T10-L5 w/ Pelvis a/ radiopaque coating
Lumbar Spine from T10-L5 to Sacrum with Pelvis and radiopaque coating
LD9371.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm
- MaterialCortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Shoulder right w/ soft tissue a/ vice attachment
Right Shoulder with scapula including vice attachment, humerus, glenoid labrum, rotator cuff and soft tissue with intermuscular fascia
PR1602.1
- Orientationright
- Model Typeintact
- DimensionsOverall length: 370mm
- MaterialHumerus: Cortical low density / soft cancellous bone, dense. Scapula: solid foam, Glenoid labrum: RUR, Rotator Cuff: Neoprene Foam: PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 Sacrum w/ radiopaque coating
Lumbar Spine designed specifically for vertebroplasty application with open cell structure, section from T10-L5, and Sacrum with radiopaque coating
LDPR0770.9
- Orientationneutral
- Model Typeintact
- DimensionsLength: 390mm
- MaterialSacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Standard Foam Coat for Lower Torso
Foam coat open, providing cavity, for the placement of a combination of L3-L5 Spine models with Pelvis and Proximal Femur. Bone model is not included in scope of delivery.
4202.11
- Model Typeintact
- DimensionsLength: 460mm, Width: 330mm, Height: 220mm
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hand and wrist right single bone w/soft tissue
Intact right single bone Hand with Radius, Ulna and soft tissue with intermuscular fascia. Major structures as nerves, muscles, vessels and tendons attached. With canals in the area of Metacarpal bones and Proximal Phalanx.
9060.2
- Orientationright
- Model Typeintact
- DimensionsOverall length: 460mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large right w/ 3-part reverse intertrochanteric fracture a/ soft tissue
Right large Femur with 3-part reverse intertrochanteric fracture. Soft tissue with intermuscular fascia and window, additional proximal holding block and distal wooden holder for clamping with the Bone clamp
LSH2251.01.1
- Orientationright
- Model Typefractured
- AO/OTA FX Class31A3.3
- DimensionsFemur Length: 465mm, Condylar width: 86mm, Neck angle: 135°. Anteversion: 15°, Head diameter: 48mm, Canal diameter: 12mm
- MaterialCortical hard density / soft cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur periprosthetic right fractured w/ soft tissue
Right fractured Femur including simulated, colored implants distally and proximally, Tibia. Soft tissue with intermuscular fascia and window and three lateral incisions additional proximal holding device for clamping with the Bone clamp
PR1707.1
- Orientationright
- Model Typefractured
- DimensionsOverall length: 840mm, Femur canal diameter 15mm Pom Stem: Ø15mm distal length: 170mm prox. length: 137mm
- MaterialFemur and Tibia: Cortical / soft cancellous bone, Soft tissue: PUR foam Stem: POM
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Shoulder left recon w/soft tissue a/vice attachment
Left Shoulder with scapula, clavicle, humerus, ligaments, cancellous humeral head, and cancellous under glenoid fossa. With vice attachment and soft tissue with intermuscular fascia, with radiopaque coating
LSH5760.9.1
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 430mm Drill hole diameter: distal 6mm
- MaterialClavicula: Solid Foam. Humerus with cancellous head. Scapula with cancellous under glenoid fossa.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access C1-L5 w/Occ a/Sacrum
Entire Spine bed for posterior access. Holds spine models from C1 - L5 with Odciput and Sacrum. Spine model is NOT included in delivery.
PR1237
- Orientationneutral
- Model Typeintact
- Dimensions950 x 200 x 180mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Humerus right pre-drilled STL data
STL Data from right Humerus with distal drill hole for intramedullary nailing and prosthesis
PR0349.STL
- Orientationright
- Model Typeintact
- DimensionsLength: 326mm. Shaft diameter: 22mm. Head diameter: 47mm. Drill hole diameter: 9mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
8950.STL
- Orientationneutral
- Model Typeintact
- DimensionsMandible width: 115mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Mandible malformation STL data
STL Data from Mandible with left-sided frontal tumor malformation
8990.STL
- Orientationneutral
- Model Typemalformation
- DimensionsMandible width:120mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Partial Skull w/ orbital malunion a/ vise attachment STL Data
STL data for Partial Skull with orbital malunion and with vise attachment on the back side
8110.STL
- Orientationneutral
- Model Typemalunion
- DimensionsSkull width: 140mm, Length: 187mm, Height: 98mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Skull hollow Clip STL data
STL Data from hollow Skull with frontal sinus, maxillary sinuses and septum. With Easy Clip mechanism for mandibles. Without mandible
8880.STL
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 190mm. Height: 153mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Skull hollow fractured Clip w/ vise attachment STL data
STL data for Skull hollow fx clip w/ vise attachment. Delivered via Download Link in Email
8846.STL
- Orientationneutral
- Model Typefractured
- DimensionsSkull width: 140mm, Length: 187mm, Height: 98mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Skull hollow w/ Mandible a/ vise attachment STL data
STL Data from hollow Skull with frontal sinus, maxillary sinuses and septum with mandible and vise attachment
8220.STL
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 190mm. Height: 153mm
- MaterialSTL data
- DeliveryEst. Ready to be shipped within 7 working days
PRINT
Lower Leg right fx prox. a/ fx distal Tibia, w/ intact Femur, 3-part foot, soft tissue 120°
Right Leg with fractured proximal tibia, MCL, LCL, PCL and patella; & 3-part foot, fractured distal tibia, fibula, talus, calcaneus, forefoot sections and ligaments, with soft tissue.
PR1560.1
- Orientationright
- Model Typefractured
- AO/OTA FX Class43C2.3, 4F2A (C), 41B2.1, 41C1.1
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hand and wrist right single bone fractured w/soft tissue
Fractured right single bone Hand with flexible joints, Radius, Ulna and Soft Tissue with intermuscular fascia. Major structures as nerves, muscles, vessels and tendons attached.
9062.2
- Orientationright
- Model Typefractured
- AO/OTA FX Class77, 2RC3, 243C
- DimensionsOverall length: 460mm
- MaterialVarious material
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow fractured Clip w/ mandible w/vise att. a/skin
Fractured hollow Skull with vise attachment and Skin and attached mandible. With Easy Clip mechanism for mandibles
8863.1
- Orientationneutral
- Model Typefractured
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam, Skin: Silicone shore 00-30
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9325
- Orientationneutral
- Model Typeintact
- DimensionsOverall length:550mm
- MaterialSolid foam low density. Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
LSS9325
- Orientationneutral
- Model Typeintact
- DimensionsOverall length:550mm
- MaterialSolid foam LSS cancellous bone density. Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Spine bed posterior access w/ L1-Sacrum, muscles, radiopaque. Overall size 35 cm x 13 cm x 20 cm
Spine bed posterior access w/ radiopaque coated L1-Sacrum, muscles.
LDPR1313.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall size 35cm x 13 cm x 20 cm