Showing 25–48 of 388 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Lower Leg left large
Left lower Leg large wwith 4-part foot, tibia, fibula, talus, calcaneus and ligaments
PR0768
PR0768
- Orientationleft
- Model Typeintact
- DimensionsFoot length: 280mm. Malleolar width: 62mm. Lower Leg length: 451mm. Tibia canal diameter: 12mm
- MaterialFoot bones: solid foam. Talus and Calcaneus: light dense cancellous foam. Ligaments: rubber
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
0806.03
- Orientationright
- Model Typeintact
- DimensionsLength: 235mm. Condylar width: 43mm
- MaterialCortical / hard cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Pelvis fractured w/ proximal Femur right
Fractured Pelvis with Sacrum and right proximal Femur and wooden vice attachment
4066
4066
- Orientationright, neutral
- Model Typefractured
- AO/OTA FX Class61B2.2
- DimensionsWidth: 305mm. Height: 160mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine cervical C1-T1 Occiput w/ spinal cord
Cervical Spine with occipital bone, vertebrae C1 to T1, sewable spinal cord with dura mater
LD9391.8
LD9391.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: solid foam, C1 to T1: Solid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Pelvis fractured w/ proximal Femur right
Fractured Pelvis with Sacrum and right proximal Femur and wooden vice attachment
4068
4068
- Orientationright, neutral
- Model Typefractured
- AO/OTA FX Class61A2.2
- DimensionsWidth: 305mm. Height: 160mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Meniscus Puck w/ defects
Meniscus Puck with 3 total defects simulating various meniscus tears made from silicone and fabric matrix
PR2120.01
PR2120.01
- Orientationleft
- Model Typeintact
- DimensionsLength: 95mm Width: 53mm Height: 15mm
- MaterialSilicone with fabric matrix
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee left w/ LCL, MCL, meniscus a/ notch
Knee left w/ LCL, MCL, meniscus with a loose posterior root area. Assembled with femur, tibia, slightly stretchy rope ligaments, and silicone menicsus
LSH1760.NH
LSH1760.NH
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 430mm. Condylar width: 95mm. Tibia plateau width: 88mm Canal diameter: Femur 15mm, Tibia 10mm.
- MaterialCortical soft density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope Meniscus: PU
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Humerus right pre-drilled
Right Humerus with distal drill hole for intramedullary nailing and prosthesis
LDPR0349
LDPR0349
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsLength: 326mm. Shaft diameter: 22mm. Head diameter: 47mm. Drill hole diameter: 9mm
- MaterialCortical low density / soft cancellous bone, dense
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
LSH2625
- Orientationright
- Model Typeintact
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53 mm, Canal diameter: 15-16mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Pelvis fractured w/ vice attachment
Fractured Pelvis with fractured Sacrum and wooden vice attachment
4062
4062
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class61A2.2, 61C2.3
- DimensionsWidth: 305mm. Height: 160mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Humerus right fractured, fragments attached w/ rubber bands
Fractured right Humerus, fragments attached with rubber bands, and foam pads attached to mimic the origin of the rotator cuff
5014.01
5014.01
- Orientationright
- Model Typefractured
- AO/OTA FX Class11C3.1
- DimensionsLength: 326mm. Shaft Diameter: 22mm. Head Diameter: 47mm
- MaterialCortical / hard cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Humerus left fractured spiral distal
Left fractured Humerus with spiral distal fracture, pre-drilled canal and distal opening
LSH5350.14
LSH5350.14
- Orientationleft
- Model Typefractured, pre-drilled canal
- DimensionsLength: 365mm. Shaft Diameter: 22mm. Head Diameter: 47mm. Drill Hole: 8mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Humerus left fractured transverse
Left fractured Humerus with transverse fracture, pre-drilled canal and distal opening
LSH5350.11
LSH5350.11
- Orientationleft
- Model Typefractured, pre-drilled canal
- DimensionsLength: 365mm. Shaft Diameter: 22mm. Head Diameter: 47mm. Drill Hole: 8mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Humerus left fractured segmental
Left fractured Humerus with segmental fracture, pre-drilled canal and distal opening
LSH5350.12
LSH5350.12
- Orientationleft
- Model Typefractured, pre-drilled canal
- DimensionsLength: 365mm. Shaft Diameter: 22mm. Head Diameter: 47mm. Drill Hole: 8mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Partial Skull Clip defect w/vise attachment and Mandible
Partial Skull with defect, vise attachment. Mandible with defect mounted with Easy Clip and with pre-drilled holes between teeth for wiring
8100
8100
- Orientationneutral
- Model Typemalformation
- DimensionsSkull width: 145mm, Length: 210mm, Height: 138mm
- MaterialSolid foam high density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Pelvis w/ joints ruptures a/ vice attachment
Pelvis with Sacrum with dislocated and rupture of the sacroiliac Joint and symphysis, with wooden vice attachment
4087
4087
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 160mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Humerus left fractured butterfly
Left fractured Humerus with butterly fracture, pre-drilled canal and distal opening
LSH5350.13
LSH5350.13
- Orientationleft
- Model Typefractured, pre-drilled canal
- DimensionsLength: 365mm. Shaft Diameter: 22mm. Head Diameter: 47mm. Drill Hole: 8mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Hemi-Pelvis w/ proximal femur right a/ vice attachment
Fractured right Hemi-Pelvis with proximal Femur and vice attachment
4050
4050
- Orientationright
- Model Typefractured
- AO/OTA FX Class62A1.2
- DimensionsAcetabular diameter: 55mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9399
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LD9391
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
LSS9399
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSH2325
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53 mm, Canal diameter: 16mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
5013
- Orientationright
- Model Typefractured
- AO/OTA FX Class13C3.1
- DimensionsLength: 326mm. Shaft Diameter: 22mm. Head Diameter: 47mm
- MaterialCortical / hard cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Spine cervical C1-T1 w/ Occiput a/ Spinal Cord, Nerves, Arteries
Cervical Spine with Occiput, vertebrae C1 toT1 with spinal cord and nerves and vertebral arteries
LSS9391.01.6
LSS9391.01.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible, Arteries: PVC hose, Nerves: PUR
- DeliveryDelivery time upon request