Showing 145–168 of 388 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Knee large left recon w/ LCL, MCL, ACL, PCL a/ notch
Left large Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, ACL, PCL with notch
LSH1801.01.NH
LSH1801.01.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm. Condylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee large right recon w/ LCL, MCL, PCL
Right large Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, and PCL
LSH1780
LSH1780
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 895mm. Condylar width: 95mm. Tibia plateau width: 88mm Canal diameter: Femur 15mm, Tibia 10mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee large left recon w/ LCL, MCL, ACL, PCL, patella
Left large Knee assembled with femur, tibia, patella and slightly rope ligaments LCL, MCL, ACL, PCL
LSH1801.03
LSH1801.03
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm. Condylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Spine lumbar L1-L5 Sacrum w/ spinal cord
Lumbar Spine from L1 to Sacrum with sewable spinal cord and dura mater
LSS9379.8
LSS9379.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSpine: Solid foam LSS concellous bone density, Disk: soft flexible foam Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Spine C1-L5 Occiput Sacrum
Spine with occipital bone, all Vertebrae, Sacrum and vertebral arteries
LD9310
LD9310
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 855mm
- MaterialSolid foam low density. Occiput: Solid foam. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 with L1 burst fracture
Large lumbar Spine from T10 - L5 with L2 burst fracture
LSS9383
LSS9383
- Orientationneutral
- Model Typefractured
- DimensionsOverall length: 285mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSS9399.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam, Arteries: PVC hose
- DeliveryDelivery time upon request
PRINT
LSS9308
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 645mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine bed posterior access Cervical C1-T1 w/Occiput
Cervical Spine bed for posterior access. Holds spine models from C1 - T1 with Occiput. Spine model is NOT included in delivery.
PR1317
PR1317
- Orientationneutral
- Model Typeintact
- Dimensions320 x 200 x 143mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Tibia large left recon w/ notch
Left large Tibia with pre-drilled canal Ø10mm and distal opening with notch
LSH1385.NH
LSH1385.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 416mm, Tibia plateau width: 78mm, Canal diameter: 10mm
- MaterialCortical hard density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large right recon w/ LCL, MCL, PCL a/ notch
Right large Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, PCL and notch
LSH1780.NH
LSH1780.NH
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 895mm. Condylar width: 95mm. Tibia plateau width: 88mm Canal diameter: Femur 15mm, Tibia 10mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Lower Leg left large w/ large tibia fibula a/ large 4 part foot
Left lower Leg large with 4-part foot, tibia with Ø10mm canal, fibula, talus, calcaneus, forefoot sections and ligaments
9645
9645
- Orientationleft
- Model Typeintact
- MaterialTibia & Calcaneus: Cortical density / low cancellous bone structure / Fibula Talus and , Forefoot sections: solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon w/ notch
Left large Femur with pre-drilled Ø16mm canal on distal side sealed and with notch
LS2325.NH
LS2325.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53mm, Canal diameter: 16mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Vertebra lumbar L4 hollow covered w/ transp. foil
Large lumbar vertebra L4 hollow covered with transparent foli and pre-drilled pedicular canal
PR1010.50
PR1010.50
- Orientationneutral
- Model Typeintact, pre-drilled canal
- DimensionsTransverse process width: 98mm. Pedicular drill hole diameter: 4.6mm
- MaterialVertebra: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine L1-L5 w/ Sacrum w/ Spinal Cord, Nerves a/ Flava
Lumbar Spine from L1 to Sacrum with spinal cord and nerves, ligaments, and flava
LD9379.60
LD9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Spine cervical C1-T1 Occiput w/ spinal cord
Cervical Spine with Occiput, vertebrae C1 to T1 with sewable spinal cord and dura mater
LSS9391.8
LSS9391.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam LSS cancellous bone density, Disk: soft foam, flexible Dura: PE Cord: gelling agents
- DeliveryDelivery time upon request
PRINT
Spine bed posterior access C1-L5 w/Sacrum
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1229
PR1229
- Orientationneutral
- Model Typeintact
- Dimensions900 x 200 x 150mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine cervical C1-T1 Occiput w/ radiopaque coating
Cervical Spine with occipital bone, vertebrae C1 to T1 and with radiopaque coating
LD9391.9
LD9391.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
3109
- Orientationright
- Model Typeintact
- DimensionsLength: 205mm. Shaft Diameter: 18mm. Canal Diameter: 3.5mm to 7mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Tibia large left recon w/ notch
Left large Tibia with pre-drilled canal Ø10mm and distal opening with notch
LS1385.NH
LS1385.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 416mm. Tibial plateau width: 78mm. Canal diameter: 10mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large left recon w/ LCL, MCL
Left large Knee assembled with femur and tibia and elastic rubber bands ligaments LCL and MCL
LS1754
LS1754
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 895mm. Condylar width: 95mm. Tibia plateau width: 88mm Canal diameter: Femur 15mm, Tibia 10mm.
- MaterialCortical soft density / low cancellous bone. Ligaments: rubber band
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine bed posterior access Lumbar T10-L5 w/Sacrum
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This Bed is 60 mm lower to the caudal side than PR1309. Spine model is NOT included in delivery.
PR1309.01
PR1309.01
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 140 mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
0930.01
- Orientationleft
- Model Typefractured
- DimensionsLength: 125mm. Width: 24mm. Height: 22mm. Canal Diameter: 4.0-4.5mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1232.30
- Orientationneutral
- Model Typeintact
- Dimensions294 x 204 x 170mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days