Showing 1177–1200 of 1212 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Knee small left recon w/ LCL, MCL, PCL
Left small Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, PCL
LS1850
LS1850
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 830mm, Condylar width: 73mm, Tibial plateau width: 74mm Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Mandible intact w/ Easy Clip a/ radiopaque coating
Mandible with cancellous bone and Easy Clip mechanism and radiopaque coating
8950.9
8950.9
- Orientationneutral
- Model Typeintact
- DimensionsMandible width: 115mm
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Shoulder right w/ vice attachment
Right Shoulder with scapula including vice attachment, humerus, glenoid labrum and rotator cuff
PR1602.10
PR1602.10
- Orientationright
- Model Typeintact
- DimensionsOverall length: 370mm
- MaterialHumerus: Cortical low density / soft cancellous bone, dense. Scapula: solid foam, Glenoid labrum: RUR, Rotator Cuff: Neoprene
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow Clip
Hollow Skull with frontal sinus, maxillary sinus, septum, w/ Easy Clip mechanism for mandible. Without mandible
8895
8895
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 190mm. Height: 153mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow w/ mandible a/ vise attachment
Hollow Skull with vise attachment, frontal sinus, maxillary sinus and septum, with attached mandible but without Easy Clip mechanism
8820
8820
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right Charcot deformity
Right lower Leg with charcot deformity, foot, tibia and fibula
LDPR1225
LDPR1225
- Orientationright
- Model Typeintact
- DimensionsFoot length: 265mm, Malleolar width: 61mm, Lower Leg length: 420mm, Tibia canal diameter: 8mm
- MaterialFoot Solid foam low density with lightly rough surface/ Tibia: Cortical / hard cancellous bone / Fibula: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right w/ Bunion Hallux valgus a/ 120° soft tissue
Right lower Leg with single bone foot, tibia, fibula, talus, calcaneus, all mid-foot and phalangeal bones, bunion hallux valgus, ligaments and soft tissue 120°
LD9160.1
LD9160.1
- Orientationright
- Model Typeintact
- DimensionsFoot length: 257mm. Malleolar width: 62mm. Lower Leg length: 440mm. Plantar flexion: 120°. Tibia canal diameter: 8 mm
- MaterialTibia: Cortical / hard cancellous bone Fibula: Solid foam Foot: Solid foam low density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine cervical C1-T1 Occiput w/spinal cord a/nerves w/ vice attachment
Cervical Spine with occiput, vertebrae C1 to T1, spinal cord and nerves and wooden vice attachment
LD9390.6
LD9390.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 360mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Spine thoracal T2-T9 w/ spinal cord a/nerves
Thoracal Spine from T2 to T9 with spinal cord and nerves
LD9380.6
LD9380.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 w/ radiopaque coating
Lumbar Spine from T10 to L5 with radiopaque coating
LDPR1536.9
LDPR1536.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 298mm
- MaterialSpine T10-L5 cortical low density / open cell cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 w/ Pelvis hemi Iliac
Lumbar Spine section from L1 to Sacrum and Pelvis hemi Iliac
LDPR1534
LDPR1534
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 330mm
- MaterialSolid foam low density. Disk: soft flexible foam Hemi-Iliac: solid foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 Sacrum w/ radiopaque coating
Lumbar Spine from L1 to Sacrum with radiopaque coating
LDPR1232.10.9
LDPR1232.10.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LD9470
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 113mm. Length: 110mm
- MaterialSolid foam low density.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9410
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam low density.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9400
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine cervical C1-C7 w/ spinal cord
Cervical Spine, vertebrae C1 to C7 with sewable spinal cord and dura mater
LD9399.8
LD9399.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
LD9398
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 161mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine thoracal T2-T9 w/ radiopaque coating
Thoracal Spine from T2 to T9 with radiopaque coating
LD9380.9
LD9380.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 Sacrum w/ radiopaque coating
Lumbar Spine from L1 to Sacrum with radiopaque coating
LD9379.9
LD9379.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar w. spondylolysis
Lumbar Spine from L1 to Sacrum with spondylolisthesis at L5/Sacrum
LD9376
LD9376
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam low density. Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 w/ Pelvis a/ Flex Rod
Lumbar Spine from T10-L5 to Sacrum with Pelvis, with flex rod and pre-drilled pedicle holes
LD9371.7
LD9371.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm, Pedicle hole diameter: 5.0mm
- MaterialCortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LD9370.10
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from T10-L5
- MaterialLD material: Low density solid foam
- DeliveryDelivery time upon request
PRINT
LD9306.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 850mm
- MaterialVertebrae: Solid foam low density, Pelvis: Solid foam, dense cancellous bone, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
9400
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days