Showing 169–190 of 190 resultsSorted by price: high to low
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
PR0624.22
- Model Typeintact
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
1610
- Orientationleft
- Model Typeintact
- DimensionsLength: 46mm. Width: 43mm. Thickness: 20mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
1600
- Orientationright
- Model Typeintact
- DimensionsLength: 46mm. Width: 43mm. Thickness: 20mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0624
- Model Typeintact
- DimensionsLength: 920mm, Width: 466 mm, Height: 230mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036.06
0036.06
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp lig. bal. without transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.05
0036.05
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036
0036
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. without transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.01
0036.01
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System with transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In a solid transportation case with foam inlays.
0037.06
0037.06
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 m, Case: length: 607 mm, width: 475 mm, depth: 275 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System with transportation case
ROB Knee Holder System for Arthroplasty workshops to hold the various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left and solid transportation case with foam inlays.
0037
0037
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm Case: Length: 525mm, Width: 450mm, Height: 235mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
PR1221
- Model Typeintact
- DimensionsLength: 460 mm, Width: 466 mm, Height: 230mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
PR0624.52
- Model Typeintact
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Set of 24 pieces of left large knee with varus (3°-7°) assembled with soft cortical femur and tibia, with ligament balancing collateral ligaments, and slightly stretchy cruciate ligaments.
LS1816.36.NH.24
LS1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine Torso C1-L5 w/ Pelvis. Normal. Ribs, Muscles, Nerves w/ soft tissue a/ skin
Spine Torso from C1-L5 with Pelvis, radiopaque coating, muscle multifidus, ribs, spinal nerves with soft tissue and skin
LD9363.FI
LD9363.FI
- Orientationneutral
- MaterialSpine and Pelvis: Solid foam low density, Disk: dense flexible foam, Soft Tissue: PU, Skin: PU
- DeliveryDelivery time upon request
PRINT
Spine Torso C1-L5 w/ Pelvis, Lenke 3 Scoliosis. Ribs, Nerve, soft tissue, xray posterior exp
Spine Torso from C1-L5 with Pelvis, radiopaque coating, muscle multifidus, ribs, spinal nerves with soft tissue, skin and posterior exposure.
LD9362.11.FI
LD9362.11.FI
- Orientationneutral
- MaterialSpine and Pelvis: Solid foam low density, Disk: dense flexible foam, Soft Tissue: PU, Skin: PU
- DeliveryDelivery time upon request
PRINT
Spine Torso C1-L5 w/ Pelvis, Lenke 3 Scoliosis. Ribs, Muscles, Nerves soft tissue, skin. Incl X-ray
Spine Torso from C1-L5 with Pelvis, radiopaque coating, muscle multifidus, ribs, spinal nerves with soft tissue and skin
LD9362.FI
LD9362.FI
- Orientationneutral
- MaterialSpine and Pelvis: Solid foam low density, Disk: dense flexible foam, Soft Tissue: PU, Skin: PU
- DeliveryDelivery time upon request
PRINT
ROB Knee Holder Rail System without transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In duffle bag transportation packaging
0037.05
0037.05
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System without transportation case
ROB Knee Holder System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left. In single use transportation packaging only.
0037.01
0037.01
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
PR0624.51
- Model Typeintact
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
SYNMAN Compact part set 16
Replacement parts for 16 participants includes the following: 16 Cricoid, 16 Cricoid Skin, 2 chest pads, 4 chest Skin, 8 right Ribs, 8 left Ribs and 16 Rib Skins
PR1221.50
PR1221.50
- Model Typeintact
- DimensionsLength: 300mm, Width: 250mm, Height: 160mm
- MaterialVarious material
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
PR0624.50
- Model Typeintact
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Hand Bed Set
Set of two pieces of Hand Beds. Bed A: for dorsal access; Bed B: for palmar access.
PR1401
PR1401
- Orientationright
- Model Typeintact
- DimensionsLength: 500mm. Width: 200mm. Height 73mm
- MaterialPP33
- DeliveryEst. Ready to be shipped within 30 working days