PRINT
Generic plate, coated with a rubber skin
PR1332.G
PR1332.G
Orientation neutral Model Type intact Dimensions 50 x 50 x 3mm. Weight tolerances: +/- 5% Material Modified bone-like polyurethane coated with rubber Skin Delivery Est. Ready to be shipped within 15 working days
PRINT
Lumbar Spine from L3-L5 to Sacrum with lateral band
LD9377
LD9377
Orientation neutral Model Type intact Dimensions Overall length: 235mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Spine from C1 to Sacrum with vertebral arteries and bending rod
LD9315.7
LD9315.7
Orientation neutral Model Type intact Dimensions Overall length: 780mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Fractured left Canine Tibia with multifragmentary distal fracture
0812.08
0812.08
Orientation left Model Type fractured Dimensions Length: 215mm. Shaft diameter: 14mm. Canal diameter: 6-8 mm Material Solid foam Delivery Est. Ready to be shipped within 15 working days
PRINT
Fractured left Ulna with olecranon fracture
0832.02
0832.02
Orientation left Model Type fractured Dimensions Length: 222mm Material Solid foam Delivery Est. Ready to be shipped within 15 working days
PRINT
Fractured left Canine Radius and Ulna
0800.07.03
0800.07.03
Orientation left Model Type fractured Dimensions Length: 222 mm. Shaft diameter: 10mm Material Solid foam Delivery Est. Ready to be shipped within 15 working days
PRINT
Fractured right Canine Femur with long oblique comminuted fractures and with additional Ø2.5mm screw holes to mimic an nonunion case
0806.02.12
0806.02.12
Orientation right Model Type fractured Dimensions Length: 220mm +/- 1mm, Shaft Diameter: 17mm Material Cortical / soft cancellous bone Delivery Est. Ready to be shipped within 15 working days
PRINT
Fractured right distal Femur, with Condylar Y-fracture, fragments are attached with rubber bands
2412.01
2412.01
Orientation right Model Type fractured AO/OTA FX Class 33C1.1 Dimensions Length: 315mm. Condylar width: 86mm. Canal diameter: 10mm Material Cortical / hard cancellous bone Delivery Est. Ready to be shipped within 15 working days
PRINT
Right Radius with cortical and soft cancellous bone
7050
7050
Orientation right Model Type intact Dimensions Length: 249mm, Shaft diameter: 13mm, Canal diameter: Ø6-4mm, Depth: 198mm Material Cortical / soft cancellous bone Delivery Est. Ready to be shipped within 15 working days
PRINT
Fractured thoracic lumbar Spine section from T10 to L2 with T11 wedge fracture
LD9368
LD9368
Orientation neutral Model Type fractured Dimensions Overall length: 210mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Est. Ready to be shipped within 15 working days
PRINT
Fractured right single bone Hand with Radius, Ulna covered with thin layer of elastomeric polyurethane simulating the periostic. Soft tissue with intermuscular fascia. With major structures such as nerves, muscles, vessels and tendons.
9061.2
9061.2
Orientation right Model Type fractured Dimensions Overall length: 460mm Material Various material Delivery Est. Ready to be shipped within 15 working days
PRINT
Fractured left Canine Tibia
0812.03
0812.03
Orientation left Model Type fractured Dimensions Length: 215mm. Shaft diameter: 14mm. Canal diameter: 6-8 mm Material Solid foam Delivery Est. Ready to be shipped within 15 working days
PRINT
SYNBONE foam block series 8.7 PCF in defined dimensions
0040-8.7-01
0040-8.7-01
Orientation neutral Model Type intact Dimensions 110mm x 110mm x 40mm Tolerances +/-1.2mm Material PUR/materials properties: Density: 8.7 PCF / 0.14 g/cm3 (ISO 1183), Compressive strength: 1.8-2 MPa (ISO 604) Delivery Est. Ready to be shipped within 15 working days
PRINT
Osteoporotic Generic bone
0080
0080
Orientation neutral Model Type intact Dimensions Length: 380mm. Diameter: 25mm Material Modified osteoporotic bone-like PUR Delivery Est. Ready to be shipped within 15 working days
PRINT
Generic bone fractured with a double layer of soft foam simulating the periosteum
0069
0069
Orientation neutral Model Type cut, fractured Dimensions Tube diameter 25mm. Canal diameter 9mm. Length: 400mm Material Solid foam / soft foam Delivery Est. Ready to be shipped within 15 working days
PRINT
Left soft tissue cover for Knee with 60° flexion angle and velcro straps to close when mounted on the model. With intermuscular fascia
PR1701
PR1701
Orientation left Model Type intact Dimensions Overall length: 430mm Material Foam Coat: PUR foam soft Delivery Est. Ready to be shipped within 15 working days
PRINT
Lumbar Spine from L1 to Sacrum with pre-drilled pedicle holes
LDPR1423
LDPR1423
Orientation neutral Model Type intact Dimensions Overall length: 230mm. Diameter pedicle holes: 5.5mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Left large Knee assembled with femur and tibia with slightly stretchy rope ligaments LCL, MCL, and PCL, with patella and patellar liagment. Pre-incision in the quadriceps tendon for a supratellar approach.
LS1750.11
LS1750.11
Orientation left Model Type intact, pre-drilled canal Dimensions Overall length: 895mm. Condylar width: 95mm. Tibia plateau width: 88mm Canal diameter: Femur 15mm, Tibia 10mm. Material Cortical soft density / low cancellous bone. Ligaments: Polyester slightly stretchy rope Delivery Est. Ready to be shipped within 15 working days
PRINT
Right medium Tibia with pre-drilled canal Ø12mm and distal opening
LSH1265
LSH1265
Orientation right Model Type intact, pre-drilled canal Dimensions Length: 397mm. Tibial plateau width: 74mm. Canal diameter: 12mm Material Cortical hard density / low cancellous bone Delivery Est. Ready to be shipped within 10 working days
PRINT
Skull cap with two craniotomy openings left and right on a base plate. With soft tissue brain filler. Brain is covered with dura mater
8512.8
8512.8
Orientation neutral Model Type cut Dimensions Skull Width: 153mm. Length: 191mm. Height: 72mm Material Skull cap: Solid foam, Brain: soft foam, PUR Dura: elastic PUR Delivery Est. Ready to be shipped within 15 working days
PRINT
Fractured large lumbar Spine from T10 to Sacrum
LSS9372
LSS9372
Orientation neutral Model Type fractured AO/OTA FX Class 53.1.A Dimensions Overall length: 420mm Material Vertebrae & Sacrum Solid foam LSS cancellous density; Disk: soft flexible foam Delivery Est. Ready to be shipped within 15 working days
PRINT
Fractured right Canine Hemi-Pelvis
0842.05.01
0842.05.01
Orientation right Model Type fractured Dimensions Acetabular diameter: 25mm Material Solid foam, dense cancellous bone Delivery Est. Ready to be shipped within 15 working days