Show sidebar
Sort by
  • Article Number
  • Top Sellers
  • Novelties
  • Title
  • Price (Low to High)
  • Price (High to Low)
By selecting items, you can choose which products should be printed.
Orientation
Type
Structure
Finishing
PRINT

RAY Knee Holder adapter set for HTO

RAY Knee Holder adapter set consisting of a proximal and distal part for high tibia osteotomie (HTO) workshops
0027.30
  • 0027.30

  • DimensionsLength:110mm Width: Ø 40mm Height: 66mm
  • MaterialSLS DF-HST
  • DeliveryEst. Ready to be shipped within 20 working days
PRINT

Bone Clamp w/o table clamp

Bone Clamp without table clamp. This SYNBONE Bone Clamp can be fixed to any SOLID table clamp available on the market. See pdf for instruction for use. Bone models are not included in delivery.
PR0734.60
  • PR0734.60

  • Orientationneutral
  • Model Typeintact
  • DimensionsLength: 19cm. Width: 8cm Height: 19.5cm
  • MaterialIron
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Feline Humerus left fractured

Fractured left Feline Humerus
0952.06
  • 0952.06

  • Orientationleft
  • Model Typefractured
  • DimensionsLength: 100mm, shaft diameter: 7mm
  • MaterialSolid foam
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Knee small left recon w/ LCL, MCL, ACL, PCL

Left small Knee assembled with femur and tibia and slightly stretchy rope ligaments including LCL, MCL, ACL and PCL
LS1851.01
  • LS1851.01

  • Orientationleft
  • Model Typeintact, pre-drilled canal
  • DimensionsOverall length: 830mm, Condylar width: 73mm, Tibial plateau width: 74mm Canal diameter: Femur 12mm, Tibia 12mm
  • MaterialCortical soft density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Canine paediatric Humerus left fractured

Fractured left Canine paediatric Humerus with marked physis
0852.10
  • 0852.10

  • Orientationleft
  • Model Typefractured
  • DimensionsLength: 191mm. Shaft diameter: 17mm. Canal diameter: 8 - 10mm
  • MaterialSolid foam
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Spine bed lateral access Lumbar T10-L5 w/ Sacrum

Lumbar Spine bed for lateral access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1308
  • PR1308

  • Orientationneutral
  • Model Typeintact
  • Dimensions500 x 200 x 100mm
  • MaterialPE Solid foam
  • DeliveryEst. Ready to be shipped within 30 working days
PRINT

Foam Block 8.7 PCF 300x150x50

SYNBONE foam block series 8.7 PCF in defined dimensions
0040-8.7-03
  • 0040-8.7-03

  • Orientationneutral
  • Model Typeintact
  • Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
  • MaterialPUR/materials properties: Density: 8.7 PCF / 0.14 g/cm3 (ISO 1183), Compressive strength: 1.8-2 MPa (ISO 604)
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Femur medium right w/ soft tissue

Right medium Femur with soft tissue with intermuscular fascia and mounted on wood block
PR1505.1
  • PR1505.1

  • Orientationright
  • Model Typeintact
  • DimensionsFemur Length: 450mm. Condylar width: 85mm. Neck angle: 122°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 9.5mm
  • MaterialCortical low density / soft cancellous bone
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Canine Hindlimb right w/ soft tissue

Right Canine Hindlimb with all bones from pelvis to the metatarsus, major ligaments and soft tissue
0806.1
  • 0806.1

  • Orientationright
  • Model Typeintact
  • DimensionsOverall length: 620mm
  • MaterialSolid foam. Femur and Tibia: cortical / cancellous bone
  • DeliveryEst. Ready to be shipped within 25 working days
PRINT

Foot Charcot right malformation

Right Foot with charcot malformity
LDPR1220
  • LDPR1220

  • Orientationright
  • Model Typemalformation
  • DimensionsFoot length: 265mm. Foot width: 90mm.
  • MaterialSolid foam
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Spine Holder insert

Spine holder insert for navigation
PR1608.15
  • PR1608.15

  • Orientationneutral
  • Model Typeintact
  • DimensionsLength: 250mm. Width: 82mm. Height: 83mm
  • MaterialPolyamide
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Spine lumbar L1-L5 w/ Sacrum and Muscles

Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
LD9379.0
  • LD9379.0

  • Orientationneutral
  • Model Typeintact
  • DimensionsOverall length: 335mm
  • MaterialSpine: Solid foam low density. Disk: soft flexible foam Muscles: soft PUR
  • DeliveryDelivery time upon request
PRINT

Feline Humerus left

Left Feline Humerus
0952.00
  • 0952.00

  • Orientationleft
  • Model Typeintact
  • DimensionsLength: 100mm, shaft diameter: 7mm
  • MaterialSolid foam
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Canine Tibia left fractured w/ notch

Fractured left Canine Tibia with notch
0812.05.NH
  • 0812.05.NH

  • Orientationleft
  • Model Typefractured
  • DimensionsLength: 215mm. Shaft diameter: 14mm. Canal diameter: 6-8 mm
  • MaterialSolid foam
  • DeliveryEst. Ready to be shipped within 10 working days
PRINT

Canine Stifle right malformation w/ fused fibula meniscus a/ vise attachment

Right Canine Stifle malformed with femur, tibia, patella, menisci and ligaments, with ankle
PR2015.01
  • PR2015.01

  • Orientationright
  • Model Typemalformation
  • DimensionsOverall length: 486mm
  • MaterialCortical / cancellous bone
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Spine Lumbar T10-L5 w/ Pelvis scoliosis, muscles and nerves

Lumbar Spine from T10-L5 with Pelvis and scoliosis, With spinal nerves and multifidus muscle
LSS9361.0
  • LSS9361.0

  • Orientationneutral
  • Model Typemalformation
  • DimensionsLength: 460mm, Width: 320mm
  • MaterialBone: LSS cancellous bone density, Disks: soft flexible foam
  • DeliveryDelivery time upon request
PRINT

Hand and wrist right single bone w/tendons

Intact right single bone Hand with flexible joints and Radius and Ulna and with tendons
9060.11
  • 9060.11

  • Orientationright
  • Model Typeintact
  • DimensionsOverall length: 450mm
  • MaterialSolid foam
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Canine Sacrum

Canine Sacrum
0843.00
  • 0843.00

  • Orientationneutral
  • Model Typeintact
  • DimensionsWidth: 63mm. Length: 65mm
  • MaterialSolid foam
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Canine Forelimb left w/ torsional deformity

Left Canine Forelimb with radius, ulna torsional deformity, humerus, carpus and vise attachment
PR2013
  • PR2013

  • Orientationleft
  • Model Typemalformation
  • DimensionsOverall length: 354mm
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Knee medium left recon w/ LCL, MCL, ACL, PCL a/ notch

Left medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, ACL, PCL and notch
LSH2051.01.NH
  • LSH2051.01.NH

  • Orientationleft
  • Model Typeintact, pre-drilled canal
  • DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
  • MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
  • DeliveryEst. Ready to be shipped within 10 working days
PRINT

Knee medium right recon w/ LCL, MCL, ACL, PCL a/ notch

Right medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, ACL, PCL and notch
LSH2081.01.NH
  • LSH2081.01.NH

  • Orientationright
  • Model Typeintact, pre-drilled canal
  • DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
  • MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
  • DeliveryEst. Ready to be shipped within 10 working days
PRINT

Hand left solid w/ various fractures

Left Hand solid without flexible joints. Various fractures on Metacarpal bones and Phalanges
9225.02
  • 9225.02

  • Orientationleft
  • Model Typefractured
  • DimensionsOverall length: 200 mm / width : 140 mm
  • MaterialSolid foam
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Tibia large left recon

Left large Tibia with pre-drilled Ø10mm canal and distal opening
LS1325
  • LS1325

  • Orientationleft
  • Model Typeintact, pre-drilled canal
  • DimensionsLength: 420mm. Tibial plateau width: 88mm. Canal diameter: 10mm
  • MaterialCortical soft density / low cancellous bone
  • DeliveryEst. Ready to be shipped within 15 working days
PRINT

Foam Block 62.5 PCF 200x150x6

SYNBONE foam block series 62.5 PCF in defined dimensions. Min. order: 20 pcs. Contact us for smaller qty..
0040-62.5-11
  • 0040-62.5-11

  • Orientationneutral
  • Model Typeintact
  • Dimensions200mm x 150mm x 6mm, Tolerances: +/-1.2mm
  • MaterialPUR/materials properties: Density: 62.5 PCF / 1.0 g/cm3 (ISO 1183) (ASTM 1622) Compressive strength: 50-55MPa (ISO 604), (ASTM-D 695)
  • DeliveryEst. Ready to be shipped within 20 working days
Scroll To Top
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.