Showing 145–168 of 1114 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Skull Brain Dura w/ vise attachment two shell
Two half-shell Skulls with vise attachment, frontal sinus, maxillary sinuses, Brain with ventricle insides and Dura divided into right and left covered with a transparent PET slice. The two half Skulls can be plugged together with integrated pins
8711
8711
- Orientationneutral
- Model Typeintact
- DimensionsHalf-shell Skull width: 75.5mm, Length: 235mm, Height: 161mm
- MaterialSkull: Solid foam Brain: Soft foam PUR Dura: elastic PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine cervical C1-T1 Occiput w/ spinal cord a/ radiopaque coating
Cervical Spine with occipital bone, vertebrae C1 toT1, sewable spinal cord with dura mater and with radiopaque coating
LD9391.8.9
LD9391.8.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: solid foam, C1 to T1: Solid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Skull hollow fractured w/mandible a/vise attachment
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and attached mandible. Without Easy Clip mechanism
8822
8822
- Orientationneutral
- Model Typefractured
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Spine lumbar T10-L5 w/ Pelvis a/ Flex Rod
Lumbar Spine from T10-L5 to Sacrum with Pelvis and flex rod
LSS9371.7
LSS9371.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm
- MaterialVertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine lumbar T10-L5 w/ Pelvis a/ Flex Rod
Lumbar Spine from T10-L5 to Sacrum with Pelvis, with flex rod and pre-drilled pedicle holes
LD9371.7
LD9371.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 495mm, Width: 300mm, Pedicle hole diameter: 5.0mm
- MaterialCortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Skull hollow fractured Clip w/ vise attachment
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and additional Easy Clip mechanism for mandibles
8841
8841
- Orientationneutral
- Model Typefractured
- DimensionsSkull width: 149mm. Length: 235mm. Height: 161mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Lower Leg right w/ soft tissue 90°
Right lower Leg with single bone foot with tibia, fibula, talus, calcaneus, all mid-foot bones, phalangeal bones, ligaments and 90° soft tissue with intermuscular fascia
9150.1
9150.1
- Orientationright
- Model Typeintact
- DimensionsFoot length: 257mm, Malleolar width: 67mm, Lower Leg length: 440mm, Tibia canal diameter: 8mm
- MaterialTibia: Cortical / hard cancellous bone Fibula: Solid foam Foot: Solid foam low density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSS9385
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 380 mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lower Leg left medium w/ soft tissue 120° oblique talus neck fx
Left lower Leg with intact tibia, fibula, talus, calcaneus, forefoot sections, ligaments and soft tissue with intermuscular fascia.
9660.1
9660.1
- Orientationleft
- Model Typeintact
- DimensionsFoot length: 257mm, Malleolar width: 67mm, Lower Leg length: 530mm, Tibia canal diameter: 12mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSS9370.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous density, Disk and Muscles: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Skull hollow fractured w/mandible a/vise attachment
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and attached intact mandible. Without Easy Clip mechanism
8824
8824
- Orientationneutral
- Model Typefractured
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee right w/ PCL, fibula, patella, holder a/ soft tissue
Right Knee intact, with fibular, patella and holder, soft tissue with intermuscular fascia
1159.1
1159.1
- Orientationright
- Model Typeintact
PRINT
Spine bed posterior a/ anterior access C1-T1 w/Occ
Cervical Spine bed for posterior and anterior access. Holds spine models from C1 - T1 with Occiput. Spine model is NOT included in delivery.
PR1230
PR1230
- Orientationneutral
- Model Typeintact
- Dimensions301 x 200 x 180mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior access Lumbar T10-L5 w/Sacrum
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This Bed is 60 mm lower to the caudal side than PR1309. Spine model is NOT included in delivery.
PR1309.01
PR1309.01
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 140 mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior access Lumbar T10-L5 w/Sacrum
Lumbar Spine bed for posterior access. Holds spine models from T10 - L5 with Sacrum. This bed is 60 mm higher to the caudal side than PR1309.01. Spine model is NOT included in delivery.
PR1309
PR1309
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 200mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Canine Forelimb right fractured
Right Canine Forelimb fractured, with all bones from scapula to the metatarsus and major ligaments
0800.11
0800.11
- Orientationright
- Model Typefractured
- DimensionsOverall length: 620mm
- MaterialSolid foam. Humerus: cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hand and fractured wrist w/ soft tissue a/ nerves
Fractured right Hand solid with Radius, Ulna and soft tissue. Major structures such as nerves, muscles, vessels and tendons attached
9075.01.1
9075.01.1
- Orientationright
- Model Typefractured
- DimensionsOverall length: 450mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hand and wrist fractured w/ soft tissue
Fractured right Hand solid with Radius, Ulna and soft tissue. Major structures such as nerves, muscles, vessels and tendons attached
9075.1
9075.1
- Orientationright
- Model Typefractured
- DimensionsOverall length: 450mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Feline Hindlimb left fractured w/ soft tissue
Fractured left Feline Hindlimb from Hemi-Pelvis with Sacrum to the metatarsus with patella, major ligaments and soft tissue
0909.1
0909.1
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 325mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Feline Hindlimb left fractured w/ soft tissue
Fractured left Feline Hindlimb from Hemi-Pelvis with Sacrum to the metatarsus, with patella, major ligaments and soft tissue
0907.1
0907.1
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 325mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Spine cervical C1-T1 Occiput w/ radiopaque coating
Cervical Spine with occipital bone, vertebrae C1 to T1 and with radiopaque coating
LD9391.9
LD9391.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Spine lumbar L1-L5 Sacrum w/ radiopaque coating
Lumbar Spine from L1 to Sacrum with radiopaque coating
LD9379.9
LD9379.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Partial Skull Clip defect pre-cut w/vise attachment a/ mandible
Partial Skull with defect and pre-cut maxilla, vise attachment. Mandible with defect, and pre-cut, mounted with Easy Clip, with pre-drilled holes between teeth for wiring.
8100.01
8100.01
- Orientationneutral
- Model Typemalformation
- DimensionsSkull width: 145mm, Length: 210mm, Height: 138mm
- MaterialSolid foam high density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSS9372
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class53.1.A
- DimensionsOverall length: 420mm
- MaterialVertebrae & Sacrum Solid foam LSS cancellous density; Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days