Showing 769–792 of 1492 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Foam Block 50 PCF 200x150x6
SYNBONE foam block series 50 PCF in defined dimensions
0040-50-11
- Orientationneutral
- Model Typeintact
- Dimensions200mm x 150mm x 6mm, Tolerances: +/-1.2mm
- MaterialPPUR/materials properties: Density: 50 PCF / 0.80 g/cm3 (ISO 1183) (ASTM 1622) Compressive strength: 40-45 MPa (ISO 604), (ASTM-D 695)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
OP-Splint overbite for BSSO osteotomie
Dental OP-Splint for Mandible with 8mm overbite occlusion for bilateral sagittal split osteotomy (BSSO)
8986
- Orientationneutral
- Model Typeintact
- DimensionsLength: 70mm. Width: 64mm
- MaterialTransparent black rigid resin
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
OP-Splint underbite for Le Fort I osteotomie
Dental OP-Splint for Maxilla with 8mm underbite occlusion for Le Fort I osteotomie
8985
- Orientationneutral
- Model Typeintact
- DimensionsLength: 64mm. Width: 64mm
- MaterialTransparent green rigid resin
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Foam Block 20 PCF 35x60x50 w/ cut and 12 holes
SYNBONE foam block series 20 PCF 35x60x50mm with cut and 12 pre drilled holes Ø1.5mm
0040-20-12
- Orientationneutral
- Model Typeintact
- DimensionsLength: 60mm, Width: 35mm, Height: 50mm, 12 holes: Ø 1.5mm
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183) Compressive strengths: 8-12 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Knee large left recon w/ LCL, MCL, ACL, PCL
Left large Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, ACL, PCL
LSH1801.01
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm. Condylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Hand and wrist fractured w/ soft tissue
Fractured right Hand solid with Radius, Ulna and soft tissue. Major structures such as nerves, muscles, vessels and tendons attached
9075.1
- Orientationright
- Model Typefractured
- DimensionsOverall length: 450mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Generic sphere 7mm
Hollow sphere consists of 2 glued 2 hemi-spheres with a wall thickness of 7mm
PR0110.20
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 7mm. Weight: 400g +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
PR0668.01
- Orientationright
- Model Typefractured
- AO/OTA FX Class11C1.3
- DimensionsLength: 165mm. Shaft diameter: 22mm
- MaterialCortical / red osteoporotic cancellous bone
- DeliveryDelivery time upon request
PRINT
4201.04
- Model Typeintact
- DimensionsLength: 460mm, Width: 330mm, Height: 220mm
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
4201.03
- Model Typepre-drilled canal
- DimensionsLength: 200mm Width: 170mm
- MaterialElastic adhesive cover
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0104
- Orientationneutral
- Model Typeintact
- DimensionsLength: 265mm +/- 0.5mm. Diameter: 30mm. Wall thickness: 7mm. Weight: 97g +/- 5%. Quality: 085
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foam Block 15 PCF 110x40x30 cut
SYNBONE foam block series 15 PCF in defined dimensions with a horizontal cut
0040-15-11
- Orientationneutral
- Model Typeintact
- Dimensions110mm x 40mm x 30mm, cut length: 70mm Tolerances +/-1.2mm
- MaterialPUR /materials properties: Density: 15 PCF / 0.24 g/cm3 (ISO 1183), Compressive strength:2-4 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull Brain Dura Mandible
Skull with frontal sinus, maxillary sinus, septum, Brain with ventricle insides, Dura and Mandible
8770
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible Solid foam Brain: Soft foam PUR Dura: elastic PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spinal cord w/ nerves cervical C1-T1
Cervical spinal cord with nerves C1-T1. Bones not included
N9390.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 193mm
- MaterialPUR solid soft foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 Sacrum w/ radiopaque coating
Lumbar Spine designed specifically for vertebroplasty application with open cell structure, section from T10-L5, and Sacrum with radiopaque coating
LDPR0770.9
- Orientationneutral
- Model Typeintact
- DimensionsLength: 390mm
- MaterialSacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LD9380
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine T10-L5 w/ Sacrum and Muscles
Lumbar Spine from T10 to Sacrum with bilateral multifidus and erector Spine muscles
LD9370.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam low density. Disk: soft flexible foam Muscles: soft PUR
- DeliveryDelivery time upon request
PRINT
LDPR1511
- Orientationleft
- Model Typeintact
- DimensionsLength: 385mm, Tibia plateau width: 79mm, Shaft diameter: 30mm, Canal diameter: 12.5mm
- MaterialCortical low density / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LDPR0737.10
- Orientationleft
- Model Typeintact
- DimensionsLength: 385mm, Tibia plateau width: 79mm, Shaft diameter: 30mm, Canal diameter: 12mm
- MaterialCortical low density / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg left w/ pilon small fragment fracture
Left lower Leg with fractured tibia, fractured fibula, talus, calcaneus, forefoot sections and ligaments.
9665.01
- Orientationleft
- Model Typefractured
- DimensionsFoot length: 257mm, Malleolar width: 67mm, Lower Leg length: 530mm, Tibia canal diameter: 12mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Canine Tibia right w/ fused fibual a/ valgus
Right Canine Tibia with mid-diaphyseal valgus malformation, with cancellous bone and fused Fibula.
PR2021
- Orientationright
- Model Typeintact
- DimensionsLength: 190mm, Shaft diameter: 14mm.
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Hand and fractured wrist w/ soft tissue a/ nerves
Fractured right Hand solid with Radius, Ulna and soft tissue. Major structures such as nerves, muscles, vessels and tendons attached
9075.01.1
- Orientationright
- Model Typefractured
- DimensionsOverall length: 450mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right w/ extension rod for clamping
Right lower Leg with 3-part foot. tibia, fibula, talus, calcaneus, forefoot sections and ligaments. Proximal an extension rod is inserted for clamping
9140.EX
- Orientationright
- Model Typeintact
- DimensionsOverall length: 550mm Foot length: 250mm, Malleolar width: 62mm, Lower Leg length: 440mm, Tibia canal diameter: 8 mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
ROB Knee Holder Rail System without transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In duffle bag transportation packaging
0037.05
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days