Showing 817–840 of 1493 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Knee left w/ LCL, MCL, patella a/ tibia fractured
Left Knee with femur, tibia with proximal transverse fracture, patella and patellar ligament, slightly stretchy rope LCL, MCL ligaments
LSH1940
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 850mm. Condylar width: 79mm. Tibia plateau width:76mm Canal diameter: Femur 8mm, Tibia 10.5mm.
- MaterialCortical and foam/ low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium right recon w/ patella LCL, MCL, PCL
Right medium Knee assembled with femur and tibia with slightly stretchy rope ligaments LCL, MCL, and PCL, with patella and patellar ligament
LS2080.12
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Foam Block 42 PCF 300x150x50
SYNBONE foam block series 42 PCF in defined dimensions
0040-42-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density:41.82 PCF/0.67 g/cm3 (ISO 1183), Compressive strength:15-20 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Paediatric Femur right fractured
Paediatric Femur right proximal and distal condylar fractures.
12202
- Orientationright
- Model Typefractured
- DimensionsLength: 336mm, shaft diameter: 23mm, head diameter: 38mm, anteversion: 25°
- MaterialCortical / soft cancellous bone, dense
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
LD9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSS9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Foot right single bone fractured
Right fractured single bone Foot with talus, calcaneus, all mid-foot and phalangeal bones
LDPR0836
- Orientationright
- Model Typefractured
- AO/OTA FX Class84B
- DimensionsFoot length: 257mm. Malleolar width: 67mm. Lower Leg length: 440mm
- MaterialSolid foam low density with lightly rough surface
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Forearm right w/ distal humerus and wrist
Right Lower Arm right, distal humerus and wrist.
PR2009
- Orientationright
- Model Typeintact
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Generic bone to perform tibial cut w/ cancellous part
Generic bone for tibial cut training with cortical and cancellous bone structure
1902.103
- Orientationneutral
- Model Typeintact
- DimensionsLength: 250mm; Dimensions: AP 48 mm / ML 77mm
- MaterialCortical foam with soft cancellous part
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Generic bone to perform tibial cut w/ solid foam
Generic bone for tibial cut training
1902.102
- Orientationneutral
- Model Typeintact
- DimensionsLength: 250mm Oval Diameters: 48/77mm
- MaterialSolid soft foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Hip left acetabulum Ø50mm a/ femur
Left Hemi-Pelvis with left Femur, mounted with rubber bands and sacrum, actabular diameter 50mm
PR1720
- Orientationleft
- DimensionsHip model femur
- MaterialPelvis
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow fractured w/mandible a/vise attachment
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and attached intact mandible. Without Easy Clip mechanism
8824
- Orientationneutral
- Model Typefractured
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
LDPR1319
- Orientationleft
- Model Typefractured
- AO/OTA FX Class32A, 33A2.3
- DimensionsLength: 435mm. Condylar width: 80 mm. Canal diameter: 10mm
- MaterialCortical low density / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Entire Arm left
Left Entire Arm with simple Hand, Ulna, Radius, and Humerus articulated with rubber bands
9252
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 665mm
- MaterialHumerus: Cortical low density / soft cancellous bone, Lower Arm and Hand: Solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Entire Arm right
Right Entire Arm with simple Hand, Ulna, Radius, and Humerus articulated with rubber bands
9012
- Orientationright
- Model Typeintact
- DimensionsOverall Length: 686mm
- MaterialHumerus: Cortical low density / soft cancellous bone, Lower Arm and Hand: Solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Paediatric Humerus right semi-transparent
Right paediatric semi-transparent Humerus with physis
15050
- Orientationright
- Model Typeintact
- DimensionsLength: 255mm. Shaft Diameter: 18mm. Head Diameter: 34mm. Canal Diameter: 7mm
- MaterialSemi-transparent with cancellous bone ends
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
LSSPR1212
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 290mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LDPR1212
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 290mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine Muscle entire C1-L5 Sacrum
Muscle multifidus and erector spinae fused from C1 to Sacrum (Spine not included in delivery)
PR1801.M
- Orientationneutral
- Model Typeintact
- DimensionsLength: 750mm, Width: 158mm, Thickness: 45mm
- MaterialPUR
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
LSS9399
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine cervical C1 – C7 w/ Arteries
Cervical Spine from C1 to C7 with Vertebra Arteries
LSS9399.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam, Arteries: PVC hose
- DeliveryDelivery time upon request
PRINT
LD9399
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LD9399.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Fibula medium left w/ soft tissue a/ structure, flap.
Left medium Fibula with soft tissue, structures such as muscle, vessels and membrane.
1565.0
- Orientationleft
- Model Typeintact
- DimensionsLength: 387 mm
- MaterialFibula: Solid foam Soft tissue structure: various material
- DeliveryEst. Ready to be shipped within 15 working days