Showing 1–24 of 274 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Hemi-Pelvis left w/ vise attachment Ø48mm
Left Hemi-Pelvis with vice attachment, Acetabular diameter 48mm
4020
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 48mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Hemi-Pelvis right malunion w/vice attachment Ø49mm
Right Hemi-Pelvis malunion with vice attachment, Acetabular diameter 49mm
PR0735
- Orientationright
- Model Typemalunion
- DimensionsAcetabular diameter: 49mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder Rail System without transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In duffle bag transportation packaging
0037.05
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System without transportation case
ROB Knee Holder System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left. In single use transportation packaging only.
0037.01
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL hard cortical a/ notch
Set of 24 PCS of LSH1816.36.NH
LSH1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Set of 24 pieces of left large knee with varus (3°-7°) assembled with soft cortical femur and tibia, with ligament balancing collateral ligaments, and slightly stretchy cruciate ligaments.
LS1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder Rail System with transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In a solid transportation case with foam inlays.
0037.06
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 m, Case: length: 607 mm, width: 475 mm, depth: 275 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System with transportation case
ROB Knee Holder System for Arthroplasty workshops to hold the various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left and solid transportation case with foam inlays.
0037
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm Case: Length: 525mm, Width: 450mm, Height: 235mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp lig. bal. without transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.05
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036.06
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. without transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.01
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Hip Holder System incl. transportation case
Hip Holder System with Hemi-Pelvis Clamp and Femur Sleeve Clamp. Designed for Total Hip Arthroplasty workshops and trainings. Delivered in a solid transportation case with foam inlays.
0031
- DimensionsHip Holder: Length: 245mm Width: 190mm Height: 301mm Case: Length: 525mm, Width: 450mm, Height: 235mm
- MaterialHolder: Aluminum transparent anodized Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
5250
- Orientationleft
- Model Typeintact
- DimensionsLength: 170mm. Shaft Diameter: 16mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon
Left large Femur with pre-drilled Ø12mm canal on distal side sealed
LS2335
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 474mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon
Left large Femur with pre-drilled Ø12mm canal on distal side sealed
LSH2335
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 474mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon
Left large Femur with pre-drilled Ø16mm canal on distal side sealed
LS2325
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53 mm, Canal diameter: 16mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon
Left large Femur with pre-drilled Ø16mm canal on distal side sealed
LSH2325
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53 mm, Canal diameter: 16mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Femur large left recon w/ notch
Left large Femur with pre-drilled Ø12mm canal on distal side sealedand notch
LS2335.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength 474 mm, Condylar width: 82 mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12 mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon w/ notch
Left large Femur with pre-drilled Ø16mm canal on distal side sealed and with notch
LS2325.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53mm, Canal diameter: 16mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon w/ notch
Left large Femur with pre-drilled Ø12mm canal on distal side sealed and notch
LSH2335.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 474 mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon w/ notch
Left large Femur with pre-drilled Ø16mm canal on distal side sealed and with notch
LSH2325.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53 mm, Canal diameter: 16mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Femur large right recon
Right large Femur with pre-drilled with Ø16mm canal distal sealed
LS2625
- Orientationright
- Model Typeintact
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53 mm, Canal diameter: 15-16mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Femur large right recon
Right large Femur with pre-drilled with Ø16mm canal distal sealed
LSH2625
- Orientationright
- Model Typeintact
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53 mm, Canal diameter: 15-16mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days