Showing 121–144 of 273 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
4532
- Orientationright
- Model Typeintact
- DimensionsAcetabular Diameter: 52mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Leg left soft tissue cover
Foam coat open, providing cavity, for the placement of medium knee. Bone model is not included in scope of delivery.
PR2011
PR2011
- Orientationleft
- Model Typeintact
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Leg left soft tissue cover a/ notch access
Foam coat open, providing cavity, for the placement of medium knee with notch. Bone model is not included in scope of delivery.
PR2011.01.NH
PR2011.01.NH
- Orientationleft
- Model Typeintact
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder Rail System Case
ROB Knee Holder Rail System Case - solid transportation case with foam inlays
0037.95
0037.95
- Orientationneutral
- DimensionsLength: 607mm, Width: 475mm, Height: 275mm
- MaterialPPC Polypropylene Copolymer
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Knee medium left recon w/ LCL, MCL, ACL, PCL
Left medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, and ACL, PCL
LSH2051.01
LSH2051.01
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee small right recon w/ LCL, MCL, ACL, PCL a/ notch
Right small Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, ACL, PCL and notch
LSH1881.01.NH
LSH1881.01.NH
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 830mm, Condylar width: 73mm, Tibial plateau width: 74mm Canal diameter: Femur 12mm, Tibia 10mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee small left recon w/ LCL, MCL, PCL a/ notch
Left small Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, PCL and notch
LSH1850.NH
LSH1850.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 830mm, Condylar width: 73mm, Tibial plateau width: 74mm Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Femur medium left recon w/ notch
Left medium Femur with pre-drilled Ø14mm canal on distal side sealed with notch
LSH2343.NH
LSH2343.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 450mm, Condylar width: 75mm, Neck angle: 130°, Anteversion: 15°, Head diameter: 46 mm, Canal diameter: 14 mm
- MaterialCortical hard density / low cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Femur medium left recon w/ notch
Left medium Femur with pre-drilled Ø12mm canal on distal side sealed with notch
LSH2340.NH
LSH2340.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 450mm. Condylar width: 79mm. Neck angle: 128°. Anteversion: 11°. Head diameter: 45 mm. Canal diameter: 12mm
- MaterialCortical hard density / low cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
LSH2330
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 425mm, Condylar width: 73mm, Neck angle: 130°, Anteversion: 16°, Head diameter: 44mm, Canal diameter: 12mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
LSH2340
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 450mm. Condylar width: 79mm. Neck angle: 128°. Anteversion: 11°. Head diameter: 45 mm. Canal diameter: 12mm
- MaterialCortical hard density / low cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
LS2630
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsLength: 425mm, Condylar width: 73mm, Neck angle: 130°, Anteversion: 16°, Head diameter: 43mm, Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Shoulder left recon w/soft tissue forearm a/vise attachment
Left Shoulder with scapula, clavicle, humerus, ligaments, cancellous humeral head, and cancellous under glenoid fossa; With vice attachment, soft tissue with intermuscular fascia and exposed forearm. Designed for joint reconstruction workshops.
LSH5761.1
LSH5761.1
- Orientationleft
- Model Typeintact
- DimensionsHumerus: 430mm
- MaterialClavicula: Solid Foam. Humeurs with cancellous head. Scapula with cancellous under glenoid fossa.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder System without transportation case
ROB Knee Holder System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left. In single use transportation packaging only.
0037.01
0037.01
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Femoral head Hemisphere Set 3 anterior posterior
ROB Knee Holder Femoral head Hemisphere Set 3 for Knee left medium series with Notch LS/LSH1950.NH up to LS/LSH1979.NH
0037.40.3AP
0037.40.3AP
- Orientationleft
- DimensionsSphere outside diameter: 70mm
- MaterialPU
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Humerus left recon
Left Humerus recon with pre-drilled canal and distal opening. Designed for joint reconstruction workshops
LSH5350
LSH5350
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 365mm. Shaft Diameter: 22mm. Head Diameter: 47mm. Drill Hole: 8m
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis revision left w/combination defect a/vise attachment Ø52mm
Left Hemi-Pelvis with combination of cranial and posterior acetabular wall defect and vice attachment, Acetabular Diameter 52mm
4103
4103
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 52mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis revision left w/cranial defect a/vise attachment Ø52mm
Left Hemi-Pelvis with cranial acetabular wall defect and vice attachment, Acetabular diameter 52mm
4100
4100
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 52mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium left recon w/ LCL, MCL, PCL a/ notch
Left medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCl, PCL and notch
LS2050.NH
LS2050.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical soft density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
RAY Knee Holder Extension Adapter set
RAY Knee Holder extension adapter is used to increase the height of the RAY Knee Holder System by 40mm
0027.25
0027.25
- DimensionsLength: 50mm, Width: 40mm, Height: 40mm
- MaterialAnodised aluminum and stainless steel
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
LS2330.02
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 425mm. Condylar width: 73mm. Neck angle: 130°. Anteversion: 16°. Head diameter: 44mm. Canal diameter: 16mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur small left recon w/ notch
Left small Femur with pre-drilled canal with Ø12mm distal sealed with notch
LS2330.NH
LS2330.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 425mm, Condylar width: 73mm, Neck angle: 130°, Anteversion: 16°, Head diameter: 44mm, Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL hard cortical a/ notch
Set of 24 PCS of LSH1816.36.NH
LSH1816.36.NH.24
LSH1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Set of 24 pieces of left large knee with varus (3°-7°) assembled with soft cortical femur and tibia, with ligament balancing collateral ligaments, and slightly stretchy cruciate ligaments.
LS1816.36.NH.24
LS1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days