PRINT
Lumbar Spine from T10 to Sacrum with radiopaque coating
CHF 193.80
LD9370.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with radiopaque coating
CHF 195.45
LDPR1232.10.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 230mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine bed for anterior access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 196.05
PR1310
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 160mm
- MaterialPE Solid foam
- DeliveryReady to ship within 30 working days
PRINT
Lumbar Spine bed for lateral access. Holds spine models from T10 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 196.05
PR1308
- Orientationneutral
- Model Typeintact
- Dimensions500 x 200 x 100mm
- MaterialPE Solid foam
- DeliveryReady to ship within 30 working days
PRINT
Lumbar Spine from L1 to Sacrum with spinal cord and nerves, ligaments, and flava
CHF 207.70
LD9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
CHF 207.70
LSS9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
Spine with L1-Sacrum and Pelvis with radiopaque coating
CHF 213.20
LDPR1335.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 350mm
- MaterialCortical low density foam. Hemi-Pelvis: Solid foam. Dense cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Spine with L1-Sacrum and Pelvis radiopaque coating
CHF 213.20
LSSPR1335.9
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 350mm
- MaterialVertebrae and Pelvis Solid foam LSS cancellous density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine from C1 to Sacrum with vertebral arteries
CHF 325.30
LD9315
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 780mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from T10 to L5 with radiopaque coating
CHF 227.95
LDPR1536.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 298mm
- MaterialSpine T10-L5 cortical low density / open cell cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine bed posterior access. Holds spine models from L1 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 241.70
PR1329
- Orientationneutral
- Model Typeintact
- Dimensions410 x 280 x 240mm
- MaterialPE Solid foam
- DeliveryReady to ship within 30 working days
PRINT
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum with slight skoliosis. Spine model is NOT included in delivery.
CHF 248.70
PR1229.10
- Orientationneutral
- Model Typeintact
- Dimensions900 x 200 x 150mm
- MaterialPE Solid foam
- DeliveryReady to ship within 30 working days
PRINT
Large Spine holder including navigations pin for large lumbar Spine L1-Sacrum
CHF 259.30
PR1608.30
- Orientationneutral
- Model Typeintact
- DimensionsLength: 294mm. Width: 204mm. Height: 170mm
- MaterialVarious materials
- DeliveryReady to ship within 25 working days
PRINT
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 261.75
PR1229
- Orientationneutral
- Model Typeintact
- Dimensions900 x 200 x 150mm
- MaterialPE Solid foam
- DeliveryReady to ship within 30 working days
PRINT
Lumbar Spine section from T10-L5 and Sacrum with radiopaque coating
CHF 265.20
LDPR0770.9
- Orientationneutral
- Model Typeintact
- DimensionsLength: 390mm
- MaterialSacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Entire Spine bed for posterior access. Holds spine models from C1 - L5 with Odciput and Sacrum. Spine model is NOT included in delivery.
CHF 284.00
PR1237
- Orientationneutral
- Model Typeintact
- Dimensions950 x 200 x 180mm
- MaterialPE Solid foam
- DeliveryReady to ship within 30 working days
PRINT
Entire Spine from T7 to L5 with Sacrum and radiopaque coating
CHF 300.90
LSS9386.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall Length: mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine flatbed for posterior access. Holds spine models from T2 - L5 with Sacrum and Pelvis. Spine model is NOT included in delivery.
CHF 319.65
PR1329.30
- Orientationneutral
- Model Typeintact
- Dimensions750 x 290 x 240 mm
- MaterialPE Solid foam
- DeliveryReady to ship within 30 working days
PRINT
Lumbar Spine bed for posterior acces. Holds spine models from T2 - L5 with Sacrum and Pelvis. Spine model is NOT included in delivery.
CHF 319.65
PR1329.20
- Orientationneutral
- Model Typeintact
- Dimensions750 x 290 x 240 mm
- MaterialPE Solid foam
- DeliveryReady to ship within 30 working days
PRINT
Spine from C1 to Sacrum with vertebral and arteries
CHF 325.30
LSS9315
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 780mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam, Arteries: PVC hose
- DeliveryDelivery time upon request