Showing 1–24 of 63 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
PR0624
- Model Typeintact
- DimensionsLength: 920mm, Width: 466 mm, Height: 230mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System without transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In duffle bag transportation packaging
0037.05
0037.05
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System without transportation case
ROB Knee Holder System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left. In single use transportation packaging only.
0037.01
0037.01
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine Holder for invasive navigation complete
Large Spine holder including Spine lg holder insert and navigations pin for large lumbar spine L1-Sacrum
PR1608.40
PR1608.40
- Orientationneutral
- Model Typeintact
- DimensionsLength: 294mm. Width: 204mm. Height: 170mm
- MaterialVarious material
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System with transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In a solid transportation case with foam inlays.
0037.06
0037.06
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 m, Case: length: 607 mm, width: 475 mm, depth: 275 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System with transportation case
ROB Knee Holder System for Arthroplasty workshops to hold the various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left and solid transportation case with foam inlays.
0037
0037
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm Case: Length: 525mm, Width: 450mm, Height: 235mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp lig. bal. without transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.05
0036.05
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036.06
0036.06
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036
0036
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. without transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.01
0036.01
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
0953.00
- Orientationleft
- Model Typeintact
- DimensionsLength: 100mm, shaft diameter: 7mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
0913.00
- Orientationleft
- Model Typeintact
- DimensionsLength: 115mm. Shaft Diameter: 7mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
0110
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 440mm. Radius thickness: 30x40mm
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Lower Leg right with w/ 3-part foot equinus
Right lower leg with 3-part equinus 60° foot, with tibia, fibula, talus, calcaneus
9165
9165
- Orientationright
- Model Typeintact
- DimensionsFoot Length: 250mm. Malleolar Width: 62mm. Lower Leg Length: 585mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior a/ anterior access C1-C7
Cervical Spine bed for posterior and anterior access. Holds spine models from C1 - C7. Spine model is NOT included in delivery.
PR1606
PR1606
- Orientationneutral
- Model Typeintact
- Dimensions240 x 180 x 100mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior access Thoracal T2-T9
Thoracic Spine bed for posterior access. Holds spine models from T2 - T9. Spine model is NOT included in delivery.
PR0440
PR0440
- Orientationneutral
- Model Typeintact
- Dimensions320 x 200 x 95mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
PR1043.10
- Orientationneutral
- Model Typeintact
- Dimensions360 x 230 x 4.2mm
- MaterialSilicone Ecoflex
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
0180
- Orientationneutral
- Model Typeintact
- DimensionsLength: 425mm, Width: 140mm, Height: 270mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior access Cervical C1-T1 w/Occiput
Cervical Spine bed for posterior access. Holds spine models from C1 - T1 with Occiput. Spine model is NOT included in delivery.
PR1317
PR1317
- Orientationneutral
- Model Typeintact
- Dimensions320 x 200 x 143mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine bed posterior access Lumbar L1-L5 w/Sacrum
Lumbar Spine bed for posterior access Holds spine models from L1 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1312
PR1312
- Orientationneutral
- Model Typeintact
- Dimensions405 x 200 x 200mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Hand Bed Set
Set of two pieces of Hand Beds. Bed A: for dorsal access; Bed B: for palmar access.
PR1401
PR1401
- Orientationright
- Model Typeintact
- DimensionsLength: 500mm. Width: 200mm. Height 73mm
- MaterialPP33
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
RAY Knee Holder Extension Adapter set
RAY Knee Holder extension adapter is used to increase the height of the RAY Knee Holder System by 40mm
0027.25
0027.25
- DimensionsLength: 50mm, Width: 40mm, Height: 40mm
- MaterialAnodised aluminum and stainless steel
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Equine Forelimb left
Equine Forelimb with all bones from distal Radius to DIP without soft tissue and hoof
0100
0100
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 527mm
- MaterialSolid foam / Cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Equine Forelimb left w/fracture 6
Equine Forelimb with all bones from distal Radius to DIP without soft tissue and hoof but fracture 6
0100.16
0100.16
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 527mm
- MaterialSolid foam / Cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days