PRINT
Skull cap on a base plate
CHF 39.60
8510
Orientation neutral Model Type intact Dimensions Skull Width: 153mm. Length: 191mm. Height: 72mm Material Skull cap: Solid foam Delivery Ready to ship within 15 working days
PRINT
Dental OP-Splint for Mandible with 8mm overbite occlusion for bilateral sagittal split osteotomy (BSSO)
CHF 40.65
8986
Orientation neutral Model Type intact Dimensions Length: 70mm. Width: 64mm Material Transparent black rigid resin Delivery Ready to ship within 10 working days
PRINT
Dental OP-Splint in full occlusion
CHF 40.65
8980
Orientation neutral Model Type intact Dimensions Length: 70mm. Width: 65mm Material Transparent red rigid resin Delivery Ready to ship within 10 working days
PRINT
Dental OP-Splint for Maxilla with 8mm underbite occlusion for Le Fort I osteotomie
CHF 40.65
8985
Orientation neutral Model Type intact Dimensions Length: 64mm. Width: 64mm Material Transparent green rigid resin Delivery Ready to ship within 10 working days
PRINT
SYNBONE foam block series 15 PCF in defined dimensions
CHF 42.20
0040-15-03
Orientation neutral Model Type intact Dimensions 300mm x 150mm x 50mm Tolerances +/-1.2mm Material PUR/materials properties: Density: 15 PCF / 0.24 g/cm3 (ISO 1183), Compressive strength: 2-4 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
SYNBONE foam block series 62.5 PCF in defined dimensions
CHF 42.35
0040-62.5-11
Orientation neutral Model Type intact Dimensions 200mm x 150mm x 6mm, Tolerances: +/-1.2mm Material PUR/materials properties: Density: 62.5 PCF / 1.0 g/cm3 (ISO 1183) (ASTM 1622) Compressive strength: 50-55MPa (ISO 604), (ASTM-D 695) Delivery Ready to ship within 20 working days
PRINT
Dome Foam Block 12.5PCF cancellous with cortical shell, with Generic Rotator Cuff (2mm suturable fabric) = Ø76mm x 52mm
CHF 43.05
0076
Orientation neutral Model Type intact Dimensions Ø 76mm; Height: 53mm; Generic Rotator Cuffs 2mm Material Dome: Cancellous PU 12.5 PCF, PU Cortical Shell, Generic Rotator Cuffs: PU laminated with fabric Delivery Ready to ship within 15 working days
PRINT
Dome Foam Block 15PCF cancellous with cortical shell, with Generic Rotator Cuff (2mm suturable fabric) = Ø76mm x 52mm
CHF 43.05
0075
Orientation neutral Model Type intact Dimensions Ø 76mm; Height: 53mm; Generic Rotator Cuffs 2mm Material Dome: Cancellous PU 15 PCF, PU Cortical Shell, Generic Rotator Cuffs: PU laminated with fabric Delivery Ready to ship within 15 working days
PRINT
Large lumbar vertebra with pre-drilled pedicular canal, filled with open cell foam and covered with a transparent foil
CHF 43.20
PR1010
Orientation neutral Model Type intact Dimensions Transverse process width: 98mm. Pedicular drill hole diameter: 4.6mm Material Vertebra: Solid foam. Foam Inlay: open cell PPI 20 soaked with Acryl Delivery Ready to ship within 15 working days
PRINT
Generic plate, coated with a rubber skin
CHF 44.85
PR0113.G
Orientation neutral Model Type intact Dimensions Dimension: 250 x 250 x 5mm, Weight: 250g +/- 5% Material Modified bone-like polyurethane coated with a rubber skin Delivery Ready to ship within 15 working days
PRINT
Generic plate, coated with a rubber skin
CHF 44.85
PR0114.G
Orientation neutral Model Type intact Dimensions Dimension: 250 x 250 x 6mm, Weight: 300g +/- 5% Material Modified bone-like polyurethane coated with a rubber skin Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine vertebrae single set from L1 to L5
CHF 44.55
LSS9370.20
Orientation neutral Model Type intact Dimensions Different sizes from L1-L5 Material LSS material with cancellous bone density Delivery Delivery time upon request
PRINT
Lumbar Spine vertebrae single set from L1 to L5.
CHF 44.55
LD9370.20
Orientation neutral Model Type intact Dimensions Different sizes from L1-L5 Material LD material: Low density solid foam Delivery Delivery time upon request
PRINT
SYNBONE foam block series 42PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 45.35
0040-42-50-02
Orientation neutral Model Type intact Dimensions 150mm x 100mm x 53mm, Tolerances: +/-1.2mm Material PUR/materials properties: Density: 41.82 PCF / 0.67 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 15-20 MPa; 40-45 MPa (ISO 604) Delivery Ready to ship within 25 working days
PRINT
Cord Set for Knot Tying Workstation: Set of 25pcs, Thickness Ø2mm length 1200mm per/pcs
CHF 45.35
PR2111.25
Orientation neutral Model Type intact Dimensions Packed in a plastick bag: Length: 220mm Width: 160mm Height: 20mm 25 Cords: Ø: 2mm Length: 1200mm Material Polyester Delivery Ready to ship within 15 working days
PRINT
SYNBONE foam block series 50 PCF in defined dimensions
CHF 46.95
0040-50-02
Orientation neutral Model Type intact Dimensions 150mm x 100mm x 50mm Tolerances +/-1.2mm Material PUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
SYNBONE foam block series 20 PCF in defined dimensions
CHF 47.90
0040-20-03
Orientation neutral Model Type intact Dimensions 300mm x 150mm x 50mm Tolerances +/-1.2mm Material PUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183), Compressive strength: 8-12 MPa (ISO 604) Delivery Ready to ship within 20 working days
PRINT
Generic block with 28 holes
CHF 47.50
PR1428
Orientation neutral Model Type intact Dimensions Length: 70mm, Width: 70mm, Height: 50mm, Density:0.2 Kg/dm3, 28 holes: Ø3.2mm deep 50mm Material PUR foam gray colour Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine vertebrae single set from T10 to L5
CHF 54.90
LD9370.10
Orientation neutral Model Type intact Dimensions Different sizes from T10-L5 Material LD material: Low density solid foam Delivery Delivery time upon request
PRINT
Lumbar Spine vertebrae single set from T10 to L5
CHF 54.90
LSS9370.10
Orientation neutral Model Type intact Dimensions Different sizes from T10-L5 Material LSS material with cancellous bone density Delivery Delivery time upon request
PRINT
Large lumbar Vertebra L4 and L5 with predrilled pedicle holes.
CHF 55.50
LDPR1716
Orientation neutral Model Type intact Dimensions Overall length: 85mm, Diameter of the pedicle holes: 5.5mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Muscle multifidus and erector spinae from L1 to Sacrum. Only muscle - Spine and Spine bed are not included in scope of delivery.
CHF 58.15
PR1501.10
Orientation neutral Model Type intact Dimensions Length: 280mm Width: 158mm Thickness: 45mm Material PUR Delivery Ready to ship within 15 working days
PRINT
Muscle multifidus and erector spinae fused for entire Lumbar and Sacrum for LSS9351
CHF 58.15
PR1801.10
Orientation neutral Material PUR Delivery Ready to ship within 15 working days