PRINT
Equine Forelimb with all bones from distal Radius to DIP, with hoof and soft tissue
CHF 198.90
0130.1
Orientation left Model Type intact Dimensions Overall length: 552mm Material Solid foam / Cortical / cancellous bone Delivery Ready to ship within 30 working days
PRINT
Hollow Skull with vise attachment and muscles, with attached mandible. Without Easy Clip mechanism
CHF 199.00
8820.0
Orientation neutral Model Type intact Dimensions Skull Width: 149mm. Length: 235mm. Height: 185mm Material Skull and Mandible: Solid foam, Muscle: PUR red Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
CHF 207.70
LSS9379.60
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber Delivery Delivery time upon request
PRINT
Spine with L1-Sacrum and Pelvis with radiopaque coating
CHF 213.20
LDPR1335.9
Orientation neutral Model Type intact Dimensions Width: 305mm. Height: 350mm Material Cortical low density foam. Hemi-Pelvis: Solid foam. Dense cancellous bone Delivery Ready to ship within 15 working days
PRINT
Spine with L1-Sacrum and Pelvis radiopaque coating
CHF 213.20
LSSPR1335.9
Orientation neutral Model Type intact Dimensions Width: 305mm. Height: 350mm Material Vertebrae and Pelvis Solid foam LSS cancellous density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Canine large Lumbar Spine with sacrum, vertebrae from L5 to sacrum. 3D-printed
CHF 218.30
0739.3D
Orientation neutral Model Type intact Dimensions Overall length: 183mm Material ABS Delivery Ready to shop within 15 working days
PRINT
Right Hemi-Thorax foam inlay red
CHF 224.30
PR1613.25
Model Type intact Dimensions Length: 317mm. Width: 173mm. Thickness: 131mm Material PUR Foam red Delivery Ready to ship within 15 working days
PRINT
Spine from C1 to Sacrum with vertebral arteries
CHF 325.30
LD9315
Orientation neutral Model Type intact Dimensions Overall length: 780mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from T10 to L5 with radiopaque coating
CHF 227.95
LDPR1536.9
Orientation neutral Model Type intact Dimensions Overall length: 298mm Material Spine T10-L5 cortical low density / open cell cancellous bone. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Hollow Skull with vise attachment and attached mandible all covered with skin but without Easy Clip mechanism
CHF 237.95
8820.1
Orientation neutral Model Type intact Dimensions Skull Width: 149mm. Length: 235mm. Height: 185mm Material Skull and Mandible: Solid foam, Skin: Silicone shore 00-30 Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine bed posterior access. Holds spine models from L1 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 241.70
PR1329
Orientation neutral Model Type intact Dimensions 410 x 280 x 240mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Right Shoulder with scapula including vice attachment, clavicle, humerus, ligaments, bicep tendon, axillary nerves and soft tissue with intermuscular fascia
CHF 253.60
PR0720.1
Orientation right Model Type intact Dimensions Overall length: 370mm Material Scapula/Clavicle: Cortical: Solid foam Humerus: Cortical soft density / low cancellous bone structure Delivery Ready to ship within 15 working days
PRINT
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 261.75
PR1229
Orientation neutral Model Type intact Dimensions 900 x 200 x 150mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Right Shoulder with scapula including vice attachment, humerus, glenoid labrum, rotator cuff and soft tissue with intermuscular fascia
CHF 264.15
PR1602.1
Orientation right Model Type intact Dimensions Overall length: 370mm Material Humerus: Cortical low density / soft cancellous bone, dense. Scapula: solid foam, Glenoid labrum: RUR, Rotator Cuff: Neoprene Foam: PUR Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine section from T10-L5 and Sacrum with radiopaque coating
CHF 265.20
LDPR0770.9
Orientation neutral Model Type intact Dimensions Length: 390mm Material Sacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Entire Spine bed for posterior access. Holds spine models from C1 - L5 with Odciput and Sacrum. Spine model is NOT included in delivery.
CHF 284.00
PR1237
Orientation neutral Model Type intact Dimensions 950 x 200 x 180mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Entire Spine from T7 to L5 with Sacrum and radiopaque coating
CHF 300.90
LSS9386.9
Orientation neutral Model Type intact Dimensions Overall Length: mm Material Vertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Foam holder for Generic bone Ø25 mm
CHF 305.55
0013
Orientation neutral Model Type intact Dimensions Length: 300mm Width: 150mm Height: 150mm Material PUR and aluminium Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine flatbed for posterior access. Holds spine models from T2 - L5 with Sacrum and Pelvis. Spine model is NOT included in delivery.
CHF 319.65
PR1329.30
Orientation neutral Model Type intact Dimensions 750 x 290 x 240 mm Material PE Solid foam Delivery Ready to ship within 30 working days