PRINT
Lumbar Spine from L1-L5 with Sacrum, pre-drilled pedicle hole and sewable spinal cord with dura mater
CHF 129.70
LSSPR1423.8
Orientation neutral Model Type intact Dimensions Overall length: 230mm. Diameter pedicle holes: 5.5mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam, Dura: PE Cord: gelling agents Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with spondylolisthesis at L5/Sacrum
CHF 130.10
LD9376
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam low density. Disk: soft foam, flexible Delivery Delivery time upon request
PRINT
Lumbar Spine section from L1 to Sacrum and Pelvis hemi Iliac
CHF 131.75
LDPR1534
Orientation neutral Model Type intact Dimensions Overall length: 330mm Material Solid foam low density. Disk: soft flexible foam Hemi-Iliac: solid foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum and Pelvis hemi Iliac
CHF 131.75
LSSPR1534
Orientation neutral Model Type intact Dimensions Overall length: 330mm Material Vertebra & Pelvis:Solid foam LSS cancellousbone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
CHF 134.90
LD9379.0
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Spine: Solid foam low density. Disk: soft flexible foam Muscles: soft PUR Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with bilateral multifidus and erector Spine muscles
CHF 134.90
LSS9379.0
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Spine: Solid foam LSS cancellous bone density, Disk: soft flexible foam, Muscles: soft PUR Delivery Delivery time upon request
PRINT
Lumbar Spine with L1 to L5 with Sacrum and Pelvis
CHF 135.50
LDPR1335
Orientation neutral Model Type intact Dimensions Width: 305mm. Height: 350mm Material Cortical low density foam. Hemi-Pelvis: Solid foam. Dense cancellous bone Delivery Ready to ship within 15 working days
PRINT
Bone Clamp without table clamp. This SYNBONE Bone Clamp can be fixed to any SOLID table clamp available on the market. See pdf for instruction for use. Bone models are not included in delivery.
CHF 141.60
PR0734.60
Orientation neutral Model Type intact Dimensions Length: 19cm. Width: 8cm Height: 19.5cm Material Iron Delivery Ready to ship within 15 working days
PRINT
Spine holder compact with flexible center block and rubber bands for fixation of rather short Spine segments for training.
CHF 149.40
0029
Orientation neutral Model Type intact Dimensions Length: 280mm, Width: 100mm, Height: 125mm Material HPL and POM Delivery Ready to ship within 20 working days
PRINT
Lumbar Spine from T10-L5 to Sacrum with Pelvis
CHF 155.90
LSS9371
Orientation neutral Model Type intact Dimensions Overall length: 495mm, Width: 300mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracal Spine from T1 to T12 with bending rod
CHF 161.25
LSS9329.7
Orientation neutral Model Type intact Dimensions Overall length: 329mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam, Felx rod Delivery Delivery time upon request
PRINT
Lumbar Spine from T10 to Sacrum with muscles
CHF 180.30
LSS9370.0
Orientation neutral Model Type intact Dimensions Overall length: 420mm Material Vertebrae and Sacrum Solid foam LSS cancellous density, Disk and Muscles: soft flexible foam Delivery Delivery time upon request
PRINT
Thoracal lumbar Spine from T2 to L2
CHF 181.60
LSS9385
Orientation neutral Model Type intact Dimensions Overall length: 380 mm Material Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from T10-L5 to Sacrum with Pelvis and flex rod
CHF 184.35
LSS9371.7
Orientation neutral Model Type intact Dimensions Overall length: 495mm, Width: 300mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
CHF 207.70
LSS9379.60
Orientation neutral Model Type intact Dimensions Overall length: 335mm Material Solid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber Delivery Delivery time upon request
PRINT
Spine from T1 to Sacrum with bending rod
CHF 350.45
LD9320.7
Orientation neutral Model Type intact Dimensions Overall length: 660mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Spine from T1-L5 with Sacrum and flex rod
CHF 350.45
LSS9320.7
Orientation neutral Model Type intact Dimensions Overall length: 660 mm Material Solid foam LSS material. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Spine from C1 to Sacrum with spinal cord and nerves and with vertebral arteries
CHF 382.30
LSS9315.6
Orientation neutral Model Type intact Dimensions Overall length: 780mm Material Vertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam, Arteries: PVC hose Delivery Delivery time upon request
PRINT
Spine C1-L5 with Occiput, all Vertebrae, Sacrum and vertebral arteries
CHF 385.50
LSS9310
Orientation neutral Model Type intact Dimensions Overall length: 855mm Material Vertebrae: LSS cancellous bone density; Occiput: Solid foam; Sacrum: low density; Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Entire Spine from T2 to L5 with Pelvis
CHF 386.90
LSS9308
Orientation neutral Model Type intact Dimensions Overall length: 645mm Material Vertebrae and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request