Showing 505–528 of 909 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Femur large left prepared for stem revision w/ notch
Left large Femur prepared for Stem replica size 14 to perform an ETO stem revision, with notch
LSH2335.02.NH
LSH2335.02.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 460mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm, Prepared for Corail Stem replica size 14
- MaterialFemur: Cortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Hemi-Pelvis w/ femur left a/ vice attachment
Left Hemi-Pelvis with Femur attached with three rubber ligaments and vice attachment, Acetabular diameter 52mm
PR1714
PR1714
- Orientationleft
- Model Typeintact
- DimensionsAcetabular: diameter: 52mm / Femur: Length: 474mm. Condylar width: 82mm. Neck angle: 130°. Anteversion: 21°. Head diameter: 48mm. Canal diameter: 12
- MaterialHemi Pelvis: Solid foam, light dense cancellous bone. Femur: Cortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis w/ femur left a/ vice attachment
Left Hemi-Pelvis with left femur and vice attachment, Acetabular diameter 48mm
PR1307
PR1307
- Orientationleft
- Model Typeintact
- DimensionsAcetabular: diameter: 48mm / Femur: Length: 425mm. Condylar width: 73mm. Neck angle: 130°. Anteversion: 18°. Head diameter: 44mm. Canal diameter: 12mm
- MaterialHemi Pelvis: Solid foam, light dense cancellous bone. Femur: Cortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0160
- Orientationright
- Model Typeintact
- DimensionsOverall length: 293mm, tibiaplateau width: 82mm, Canal: Ø10mm.
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Thumb and Index Finger Bed
Thumb and Index Finger bed for an optimal hold of the model 9061.40. For repeated use. Bone model in not included in the sope of delivery.
9061.50
9061.50
- Orientationneutral
- Model Typeintact
- DimensionsLength: 195mm Width: 80mm Height: 55mm
- MaterialSilicon
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL hard cortical a/ notch
Left large Knee (varus 3°-7°) assembled with femur and tibia and ligament balancing collateral ligaments LCL, MCL, and slightly stretchy cruciate ligaments ACL, PCL. Compatible with ROB Pro Knee Holder System.
LSH1816.36.NH
LSH1816.36.NH
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Left large Knee (varus 3°-7°) assembled with femur and tibia and ligament balancing collateral ligaments LCL, MCL, and slightly stretchy cruciate ligaments ACL, PCL. Compatible with ROB Pro Knee Holder System.
LS1816.36.NH
LS1816.36.NH
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSS9370.10
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from T10-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
LD9370.10
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from T10-L5
- MaterialLD material: Low density solid foam
- DeliveryDelivery time upon request
PRINT
LDPR1716
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 85mm, Diameter of the pedicle holes: 5.5mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lower Arm right w/ spongiosa a/ multiple fracture in radius
Right Lower Arm right, radius with cortical and soft cancellous bone shaft fracture, with intact ulna.
6511
6511
- Orientationright
- Model Typeintact
- MaterialCortical / soft cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Knee left w/ LCL, MCL, meniscus a/ notch
Knee left w/ LCL, MCL, meniscus with a loose posterior root area. Assembled with femur, tibia, slightly stretchy rope ligaments, and silicone menicsus
LSH1760.NH
LSH1760.NH
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 430mm. Condylar width: 95mm. Tibia plateau width: 88mm Canal diameter: Femur 15mm, Tibia 10mm.
- MaterialCortical soft density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope Meniscus: PU
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine Muscle lumbar L1-L5 Sacrum
Muscle multifidus and erector spinae from L1 to Sacrum. Only muscle - Spine and Spine bed are not included in scope of delivery.
PR1501.10
PR1501.10
- Orientationneutral
- Model Typeintact
- DimensionsLength: 280mm Width: 158mm Thickness: 45mm
- MaterialPUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine Muscle lumbar T10-L5 Sacrum
Muscle multifidus and erector spinae from T-10 to Sacrum - only muscle. Spine is not included
PR1501
PR1501
- Orientationneutral
- Model Typeintact
- DimensionsLength: 363mm Width: 158mm Thickness: 45mm
- MaterialPUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0112.01
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 5mm. Weight: 215g +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
PR0057
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 6mm. Weight: 250g +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
PR0110.01
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 7mm. Weight: 300g +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
5230
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 475mm
- MaterialHumerus: Cortical low density / soft cancellous bone. Lower Arm: Solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
5030
- Orientationright
- Model Typeintact
- DimensionsOverall length: 475mm
- MaterialLower Arm: Solid foam. Humerus: Cortical hard cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD9377
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LD9377.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSS9377
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSS9377.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
0040-30-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days