Showing 481–504 of 1490 resultsSorted by popularity
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Shoulder left recon w/soft tissue a/vice attachment
Left Shoulder with scapula, clavicle, humerus, ligaments, cancellous humeral head, and cancellous under glenoid fossa. With vice attachment and soft tissue with intermuscular fascia. Designed for joint reconstruction workshops
LSH5760.1
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 430mm Drill hole diameter: distal 6mm
- MaterialClavicula: Solid Foam. Humerus with cancellous head. Scapula with cancellous under glenoid fossa.
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right fractured
Right lower Leg with 3-part foot, tibia, fibula, talus, calcaneus, forefoot sections and ligaments, posterior structures
9185
- Orientationright
- Model Typefractured
- AO/OTA FX Class43C2.2
- DimensionsFoot length: 257mm, Malleolar width: 67mm, Lower Leg length: 440mm, Tibia canal diameter: 8mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Lower Leg right fractured
Right lower Leg with single bone fractured foot with tibia, fibula, fractured talus, calcaneus, all mid-foot bones, phalangeal bones and ligaments
9151
- Orientationright
- Model Typefractured
- AO/OTA FX Class81.2.A
- DimensionsFoot Length: 255mm. Malleolar Width: 62mm. Lower Leg Length: 440mm. Canal Diameter: 8mm
- MaterialTibia: Cortical / hard cancellous bone Fibula: Solid foam Foot: Solid foam low density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar L1-L5 w/ Sacrum fractured
Large lumbar Spine from L1 to Sacrum with pre-drilled pedicle holes and L3 wedge fracture
LDPR1232
- Orientationneutral
- Model Typefractured
- AO/OTA FX Class54A3, 53.3.B3
- DimensionsOverall length: 230mm, Diameter of the pedicle holes: 5.5mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foam Block 15 PCF 300x150x50
SYNBONE foam block series 15 PCF in defined dimensions
0040-15-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 15 PCF / 0.24 g/cm3 (ISO 1183), Compressive strength: 2-4 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Spine cervical C1-T1 Occiput
Cervical Spine with occipital bone, vertebrae C1 to T1 with vertebra arteries
LD9391.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Malleolus right
Right Malleolus with distal tibia, distal fibula and membrana interossea
3110
- Orientationright
- Model Typeintact
- DimensionsLength: 205mm. Width: 59mm. Tibia canal diameter: 8mm. Fibula canal diameter: 3.5mm to 7mm
- MaterialTibia: Cortical / soft cancellous bone. Fibula: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium left recon w/ LCL, MCL, PCL a/ notch
Left medium Knee assembled with femur and tibia and screwed elastic band ligaments LCL, MCL with notch
LS2054.11.NH
- Orientationleft
- Model Typepre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical soft density / low cancellous bone structure. Ligaments: rubber band
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSH2250
- Orientationright
- Model Typeintact
- DimensionsLength: 465mm. Condylar width: 86mm. Neck angle: 135°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 9.5mm
- MaterialCortical hard density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right fractured w/ 3-part foot
Right lower Leg with 3-part foot with fractured tibia, fractured fibula, talus, calcaneus, forefoot sections, ligaments
9144
- Orientationright
- Model Typefractured
- AO/OTA FX Class42B3, 4R2B (C)
- DimensionsFoot Length: 257mm. Malleolar width: 67mm, Lower Leg Length: 440 mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Spine Lumbar Torso T10-L5 w/Pelvis, Scoliosis, Muscles, Nerves w/soft tissue a/skin
Lumbar Spine Torso from T10-L5 with Pelvis, with lumbar scoliosis deformity, radiopaque coating, with muscle multifidus, spinal nerves with soft tissue and skin
LSS9361.FI
- Orientationneutral
- Model Typeintact, malformation, pathologic
- DimensionsLength: 480mm Width: 315mm Height: 220mm
- MaterialSpine and Pelvis: Solid foam, LSS cancellous bone density, Disk: soft flexible foam, Soft Tissue: PU, Skin: PU
- Delivery#VALUE!
PRINT
Spine thoracal lumbar T7-L5 Sacrum w/ radiopaque
Entire Spine from T7 to L5 with Sacrum and radiopaque coating
LSS9386.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall Length: mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine bed posterior access Lumbar L1-L5 w/Sacrum
Lumbar Spine bed for posterior access Holds spine models from L1 - L5 with Sacrum. Spine model is NOT included in delivery.
PR1312
- Orientationneutral
- Model Typeintact
- Dimensions405 x 200 x 200mm
- MaterialPE Solid foam
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Femur medium right w/ patella
Right medium Femur with distal canal opening and with patella
LD2162.03
- Orientationright
- Model Typeintact
- DimensionsLength: 450mm. Condylar width: 85mm. Neck angle: 122°. Anteversion: 15°. Head diameter: 48mm. Canal diameter: 9.5mm
- MaterialFemur: Cortical low density / soft cancellous bone Patella: Solid Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon
Left large Femur with pre-drilled Ø12mm canal on distal side sealed
LSH2335
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 474mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull left side hollow w/ vise attachment
Partial hollow Skull left side with vise attachment, frontal sinus and maxillary sinuses
8800.L
- Orientationleft
- Model Typeintact
- DimensionsSkull width: 74mm. Length: 235mm. Height: 161mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foam Block 5 PCF 150x100x50
SYNBONE foam block series 15 PCF in defined dimensions
0040-5-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 5 PCF / 0.08 g/cm3 (ISO 1183), Compressive strength: 0.7 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1546
- Orientationneutral
- Model Typeintact
- Dimensions250 x 250 x 5mm. Weight: 340g +/- 5% Density: 65 pcf +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull Brain Dura w/ vise attachment two shell
Two half-shell Skulls with vise attachment, frontal sinus, maxillary sinuses, Brain with ventricle insides and Dura divided into right and left covered with a transparent PET slice. The two half Skulls can be plugged together with integrated pins
8711
- Orientationneutral
- Model Typeintact
- DimensionsHalf-shell Skull width: 75.5mm, Length: 235mm, Height: 161mm
- MaterialSkull: Solid foam Brain: Soft foam PUR Dura: elastic PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Bone Holder Skills Trainer
Skills Bone Holder Station for Sports Knee and Shoulder models. Recommended for SPORTS medicine educational skills training
PR2204
- Orientationneutral
- Model Typeintact
- DimensionsLength: mm. Width: mm. Height: mm
- MaterialHPL, Aluminium, DF-HST and Steel
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Scapula left recon
Left Scapula with cancellous bone under glenoid fossa. Hard Cortical. Designed for joint reconstruction workshops
LSH5600
- Orientationleft
- Model Typeintact
- DimensionsLength: 200mm, Width: 140mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium left recon w/ LCL, MCL, PCL
Left medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCl, and PCL
LS2050
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical soft density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon
Left large Femur with pre-drilled Ø16mm canal on distal side sealed
LS2325
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53 mm, Canal diameter: 16mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis left w/osteophytes a/vise attachment Ø52mm
Left Hemi-Pelvis with osteophytes acetabular diameter 52mm and a posterior holding block, for primary Ø54 Cup replacement with 54mm reamer.
4012
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 52mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days