PRINT
Generic plate, coated with a rubber skin
CHF 44.85
PR0113.G
- Orientationneutral
- Model Typeintact
- DimensionsDimension: 250 x 250 x 5mm, Weight: 250g +/- 5%
- MaterialModified bone-like polyurethane coated with a rubber skin
- DeliveryReady to ship within 15 working days
PRINT
Generic plate, coated with a rubber skin
CHF 44.85
PR0114.G
- Orientationneutral
- Model Typeintact
- DimensionsDimension: 250 x 250 x 6mm, Weight: 300g +/- 5%
- MaterialModified bone-like polyurethane coated with a rubber skin
- DeliveryReady to ship within 15 working days
PRINT
Lumbar Spine vertebrae single set from L1 to L5
CHF 44.55
LSS9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
Lumbar Spine vertebrae single set from L1 to L5.
CHF 44.55
LD9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLD material: Low density solid foam
- DeliveryDelivery time upon request
PRINT
SYNBONE foam block series 20 PCF 35x60x50mm with cut and 12 pre drilled holes Ø1.5mm
CHF 45.30
0040-20-12
- Orientationneutral
- Model Typeintact
- DimensionsLength: 60mm, Width: 35mm, Height: 50mm, 12 holes: Ø 1.5mm
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183) Compressive strengths: 8-12 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 42PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 45.35
0040-42-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 41.82 PCF / 0.67 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 15-20 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 25 working days
PRINT
Cord Set for Knot Tying Workstation: Set of 25pcs, Thickness Ø2mm length 1200mm per/pcs
CHF 45.35
PR2111.25
- Orientationneutral
- Model Typeintact
- DimensionsPacked in a plastick bag: Length: 220mm Width: 160mm Height: 20mm 25 Cords: Ø: 2mm Length: 1200mm
- MaterialPolyester
- DeliveryReady to ship within 15 working days
PRINT
Left Equine Radius and Ulna
CHF 46.70
0110
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 440mm. Radius thickness: 30x40mm
- MaterialCortical / cancellous bone
- DeliveryReady to ship within 30 working days
PRINT
SYNBONE foam block series 50 PCF in defined dimensions
CHF 46.95
0040-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 20 PCF in defined dimensions
CHF 47.90
0040-20-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183), Compressive strength: 8-12 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
Generic block with 28 holes
CHF 47.50
PR1428
- Orientationneutral
- Model Typeintact
- DimensionsLength: 70mm, Width: 70mm, Height: 50mm, Density:0.2 Kg/dm3, 28 holes: Ø3.2mm deep 50mm
- MaterialPUR foam gray colour
- DeliveryReady to ship within 15 working days
PRINT
Implant Replica Femur Component Posterior-Stabilized size 5 left SYNBONE generic geometry
CHF 48.80
0028.15.PS
- Orientationleft
- Model Typeintact
- DimensionsSize 5 left: Condylar width: 66.5mm Replica depth: 62.5mm Replica height: 53.4mm
- MaterialSLS: DF-HST and with two metal pins
- DeliveryReady to ship within 15 working days
PRINT
Left large Knee assembled with femur, tibia, patella and slightly rope ligaments LCL, MCL, ACL, PCL
CHF 50.00
LSH1801.03
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm, Condylar width: 82mm Tibia plateau width: 78mm Canal diameter: Femur 12mm, Tibia 10mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 10 working days
PRINT
Left large Knee assembled with femur, tibia, patella and slightly rope ligaments LCL, MCL, ACL, PCL, with notch
CHF 50.00
LSH1801.03.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm, Condylar width: 82mm Tibia plateau width: 78mm Canal diameter: Femur 12mm, Tibia 10mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 10 working days
PRINT
Left medium Knee assembled with femur, tibia, patella and slightly rope ligaments LCL, MCL, ACL, PCL, with notch
CHF 50.00
LSH2051.03.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 10 working days
PRINT
Right Knee with slightly stretchy rope ligaments ACL, PCL and patella
CHF 50.00
LDPR1715
- Orientationright
- Model Typeintact
- DimensionsOverall length: 835 mm. Femur: Condylar width: 86 mm. Neck angle: 135°. Anteversion:
- MaterialCortical soft density / low cancellous bone structure
- DeliveryReady to ship within 15 working days
PRINT
Left large Femur prepared for Stem replica size 14 to perform an ETO stem revision, with notch
CHF 51.00
LSH2335.02.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 460mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm, Prepared for Corail Stem replica size 14
- MaterialFemur: Cortical hard density / low cancellous bone structure
- DeliveryReady to ship within 25 working days
PRINT
Left Hemi-Pelvis with left femur and vice attachment, Acetabular diameter 48mm
CHF 51.95
PR1307
- Orientationleft
- Model Typeintact
- DimensionsAcetabular: diameter: 48mm / Femur: Length: 425mm. Condylar width: 73mm. Neck angle: 130°. Anteversion: 18°. Head diameter: 44mm. Canal diameter: 12mm
- MaterialHemi Pelvis: Solid foam, light dense cancellous bone. Femur: Cortical soft density / low cancellous bone structure
- DeliveryReady to ship within 15 working days
PRINT
Left Hemi-Pelvis with Femur attached with three rubber ligaments and vice attachment, Acetabular diameter 52mm
CHF 51.95
PR1714
- Orientationleft
- Model Typeintact
- DimensionsAcetabular: diameter: 52mm / Femur: Length: 474mm. Condylar width: 82mm. Neck angle: 130°. Anteversion: 21°. Head diameter: 48mm. Canal diameter: 12
- MaterialHemi Pelvis: Solid foam, light dense cancellous bone. Femur: Cortical soft density / low cancellous bone structure
- DeliveryReady to ship within 15 working days
PRINT
Right Equine Foal Tibia with epiphysis
CHF 53.40
0160
- Orientationright
- Model Typeintact
- DimensionsOverall length: 293mm, tibiaplateau width: 82mm, Canal: Ø10mm.
- MaterialCortical / cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Thumb and Index Finger bed for an optimal hold of the model 9061.40. For repeated use. Bone model in not included in the sope of delivery.
CHF 53.55
9061.50
- Orientationneutral
- Model Typeintact
- DimensionsLength: 195mm Width: 80mm Height: 55mm
- MaterialSilicon
- DeliveryReady to ship within 15 working days