PRINT
Fractured right Hemi-Pelvis with proximal Femur and vice attachment
CHF 76.60
4050
- Orientationright
- Model Typefractured
- AO/OTA FX Class62A1.2
- DimensionsAcetabular diameter: 55mm
- MaterialSolid foam, dense cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Left lower Leg distal large with tibia, fibula with canal and 4-part foot consisting of talus, calcaneus, forefoot sections and ligaments
CHF 76.80
9670
- Orientationleft
- Model Typeintact
- MaterialTibia & Calcaneus: Cortical density / low cancellous bone structure / Fibula Talus and , Forefoot sections: solid foam
- DeliveryReady to ship within 15 working days
PRINT
Right intact lower Leg distal with medium tibia, fibula. With canal and 3-part foot consisting of talus, calcaneus, forefoot sections and ligaments
CHF 76.80
9190
- Orientationright
- Model Typeintact
- MaterialTibia & Calcaneus: Cortical density / low cancellous bone structure / Fibula Talus and , Forefoot sections: solid foam
- DeliveryReady to ship within 15 working days
PRINT
Skull cap with two craniotomy openings left and right on a base plate. With soft tissue brain filler. Brain is covered with dura mater
CHF 76.05
8512.8
- Orientationneutral
- Model Typecut
- DimensionsSkull Width: 153mm. Length: 191mm. Height: 72mm
- MaterialSkull cap: Solid foam, Brain: soft foam, PUR Dura: elastic PUR
- DeliveryReady to ship within 15 working days
PRINT
Left medium Knee with removed primary implant with LCL, MCL and notch for revision exercises
CHF 77.85
LSH2022.11.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm Condylar width: 77mm Tibia plateau width: 76mm Canal Ø: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 15 working days
PRINT
Brain with ventricle insides and wrapped with a Dura and at left side a colored hematoma
CHF 78.15
8781
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 125mm. Length: 145mm. Height: 170mm
- MaterialBrain: Soft foam PUR Dura: elastic PUR with matrix
- DeliveryReady to ship within 15 working days
PRINT
Left Knee with femur, tibia with proximal transverse fracture, patella and patellar ligament, slightly stretchy rope LCL, MCL ligaments
CHF 78.25
LSH1940
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 850mm. Condylar width: 79mm. Tibia plateau width:76mm Canal diameter: Femur 8mm, Tibia 10.5mm.
- MaterialCortical and foam/ low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 15 working days
PRINT
Right medium Knee assembled with femur and tibia with slightly stretchy rope ligaments LCL, MCL, and PCL, with patella and patellar ligament
CHF 78.25
LS2080.12
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone structure. Ligaments: Polyester slightly stretchy rope
- DeliveryReady to ship within 10 working days
PRINT
SYNBONE foam block series 42 PCF in defined dimensions
CHF 79.70
0040-42-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density:41.82 PCF/0.67 g/cm3 (ISO 1183), Compressive strength:15-20 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
Lumbar Spine from L1 to Sacrum
CHF 79.90
LD9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum
CHF 79.90
LSS9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Generic bone for tibial cut training with cortical and cancellous bone structure
CHF 80.65
1902.103
- Orientationneutral
- Model Typeintact
- DimensionsLength: 250mm; Dimensions: AP 48 mm / ML 77mm
- MaterialCortical foam with soft cancellous part
- DeliveryReady to ship within 10 working days
PRINT
Generic bone for tibial cut training
CHF 80.55
1902.102
- Orientationneutral
- Model Typeintact
- DimensionsLength: 250mm Oval Diameters: 48/77mm
- MaterialSolid soft foam
- DeliveryReady to ship within 10 working days
PRINT
Fractured hollow Skull with vise attachment, frontal and maxillary sinus, septum and attached intact mandible. Without Easy Clip mechanism
CHF 179.40
8824
- Orientationneutral
- Model Typefractured
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam
- DeliveryReady to ship within 10 working days
PRINT
Fractured left periprosthetic Femur
CHF 81.35
LDPR1319
- Orientationleft
- Model Typefractured
- AO/OTA FX Class32A, 33A2.3
- DimensionsLength: 435mm. Condylar width: 80 mm. Canal diameter: 10mm
- MaterialCortical low density / soft cancellous bone
- DeliveryReady to ship within 15 working days
PRINT
Left Entire Arm with simple Hand, Ulna, Radius, and Humerus articulated with rubber bands
CHF 82.25
9252
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 665mm
- MaterialHumerus: Cortical low density / soft cancellous bone, Lower Arm and Hand: Solid foam.
- DeliveryReady to ship within 15 working days
PRINT
Right Entire Arm with simple Hand, Ulna, Radius, and Humerus articulated with rubber bands
CHF 82.25
9012
- Orientationright
- Model Typeintact
- DimensionsOverall Length: 686mm
- MaterialHumerus: Cortical low density / soft cancellous bone, Lower Arm and Hand: Solid foam.
- DeliveryReady to ship within 15 working days
PRINT
Right paediatric semi-transparent Humerus with physis
CHF 82.50
15050
- Orientationright
- Model Typeintact
- DimensionsLength: 255mm. Shaft Diameter: 18mm. Head Diameter: 34mm. Canal Diameter: 7mm
- MaterialSemi-transparent with cancellous bone ends
- DeliveryReady to ship within 25 working days
PRINT
Lumbar Spine from T10 to L5
CHF 82.65
LSSPR1212
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 290mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from T10 to L5
CHF 82.65
LDPR1212
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 290mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Muscle multifidus and erector spinae fused from C1 to Sacrum (Spine not included in delivery)
CHF 82.45
PR1801.M
- Orientationneutral
- Model Typeintact
- DimensionsLength: 750mm, Width: 158mm, Thickness: 45mm
- MaterialPUR
- DeliveryReady to ship within 20 working days
PRINT
Cervical Spine from C1 to C7
CHF 83.40
LSS9399
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS ancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Cervical Spine from C1 to C7 with Vertebra Arteries
CHF 83.40
LSS9399.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 152 mm
- MaterialVertebra: Solid foam LSS ancellous bone density, Disk: soft flexible foam, Arteries: PVC hose
- DeliveryDelivery time upon request