Showing 1–24 of 390 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
7220
- Orientationleft
- Model Typeintact
- DimensionsLength: 243mm. Shaft Diameter: 12mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
5300
- Orientationleft
- Model Typeintact
- DimensionsLength: 340mm, Shaft diameter: 20mm, Head diameter: 54mm
- MaterialCortical / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis left w/ vise attachment Ø48mm
Left Hemi-Pelvis with vice attachment, Acetabular diameter 48mm
4020
4020
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 48mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Lower Leg left large
Left lower Leg large wwith 4-part foot, tibia, fibula, talus, calcaneus and ligaments
PR0768
PR0768
- Orientationleft
- Model Typeintact
- DimensionsFoot length: 280mm. Malleolar width: 62mm. Lower Leg length: 451mm. Tibia canal diameter: 12mm
- MaterialFoot bones: solid foam. Talus and Calcaneus: light dense cancellous foam. Ligaments: rubber
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Set of 24 pieces of left large knee with varus (3°-7°) assembled with soft cortical femur and tibia, with ligament balancing collateral ligaments, and slightly stretchy cruciate ligaments.
LS1816.36.NH.24
LS1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp lig. bal. without transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.05
0036.05
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036.06
0036.06
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036
0036
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. without transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.01
0036.01
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
1610
- Orientationleft
- Model Typeintact
- DimensionsLength: 46mm. Width: 43mm. Thickness: 20mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
5200
- Orientationleft
- Model Typeintact
- DimensionsLength: 157mm. Shaft Diameter: 13mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
5250
- Orientationleft
- Model Typeintact
- DimensionsLength: 170mm. Shaft Diameter: 16mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
3209
- Orientationleft
- Model Typeintact
- DimensionsLength: 205mm. Shaft Diameter: 18mm. Canal Diameter: 3.5mm to 7mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0842
- Orientationleft
- Model Typeintact
- DimensionsLength: 373mm
- MaterialSolid foam, light dense
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0914
- Orientationleft
- Model Typeintact
- DimensionsLength: 379mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
1585
- Orientationleft
- Model Typeintact
- DimensionsLength: 400 mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
1525
- Orientationleft
- Model Typeintact
- DimensionsLength: 410mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
1565
- Orientationleft
- Model Typeintact
- DimensionsLength: 387 mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0842.01
- Orientationleft
- Model Typeintact
- DimensionsLength: 373mm
- MaterialSolid foam, light dense
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
7201
- Orientationleft
- Model Typeintact
- DimensionsLength: 249mm. Shaft Diameter: 13mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
6201
- Orientationleft
- Model Typeintact
- DimensionsLength 264mm. Shaft Diameter: 12mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LD5300
- Orientationleft
- Model Typeintact
- DimensionsLength: 340mm, Shaft diameter: 20mm, Head diameter: 54mm
- MaterialCortical low density / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
6203
- Orientationleft
- Model Typefractured
- DimensionsLength 264mm. Shaft Diameter: 12mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0922.00
- Orientationleft
- Model Typeintact
- DimensionsLength: 110mm. Shaft Diameter: 7mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days