PRINT
Skull cap on a base plate
CHF 39.60
8510
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 153mm. Length: 191mm. Height: 72mm
- MaterialSkull cap: Solid foam
- DeliveryReady to ship within 15 working days
PRINT
Dental OP-Splint for Mandible with 8mm overbite occlusion for bilateral sagittal split osteotomy (BSSO)
CHF 40.65
8986
- Orientationneutral
- Model Typeintact
- DimensionsLength: 70mm. Width: 64mm
- MaterialTransparent black rigid resin
- DeliveryReady to ship within 10 working days
PRINT
Dental OP-Splint in full occlusion
CHF 40.65
8980
- Orientationneutral
- Model Typeintact
- DimensionsLength: 70mm. Width: 65mm
- MaterialTransparent red rigid resin
- DeliveryReady to ship within 10 working days
PRINT
Dental OP-Splint for Maxilla with 8mm underbite occlusion for Le Fort I osteotomie
CHF 40.65
8985
- Orientationneutral
- Model Typeintact
- DimensionsLength: 64mm. Width: 64mm
- MaterialTransparent green rigid resin
- DeliveryReady to ship within 10 working days
PRINT
SYNBONE foam block series 15 PCF in defined dimensions
CHF 42.20
0040-15-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 15 PCF / 0.24 g/cm3 (ISO 1183), Compressive strength: 2-4 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 62.5 PCF in defined dimensions
CHF 42.35
0040-62.5-11
- Orientationneutral
- Model Typeintact
- Dimensions200mm x 150mm x 6mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 62.5 PCF / 1.0 g/cm3 (ISO 1183) (ASTM 1622) Compressive strength: 50-55MPa (ISO 604), (ASTM-D 695)
- DeliveryReady to ship within 20 working days
PRINT
Dome Foam Block 12.5PCF cancellous with cortical shell, with Generic Rotator Cuff (2mm suturable fabric) = Ø76mm x 52mm
CHF 43.05
0076
- Orientationneutral
- Model Typeintact
- DimensionsØ 76mm; Height: 53mm; Generic Rotator Cuffs 2mm
- MaterialDome: Cancellous PU 12.5 PCF, PU Cortical Shell, Generic Rotator Cuffs: PU laminated with fabric
- DeliveryReady to ship within 15 working days
PRINT
Dome Foam Block 15PCF cancellous with cortical shell, with Generic Rotator Cuff (2mm suturable fabric) = Ø76mm x 52mm
CHF 43.05
0075
- Orientationneutral
- Model Typeintact
- DimensionsØ 76mm; Height: 53mm; Generic Rotator Cuffs 2mm
- MaterialDome: Cancellous PU 15 PCF, PU Cortical Shell, Generic Rotator Cuffs: PU laminated with fabric
- DeliveryReady to ship within 15 working days
PRINT
Large lumbar vertebra with pre-drilled pedicular canal, filled with open cell foam and covered with a transparent foil
CHF 43.20
PR1010
- Orientationneutral
- Model Typeintact
- DimensionsTransverse process width: 98mm. Pedicular drill hole diameter: 4.6mm
- MaterialVertebra: Solid foam. Foam Inlay: open cell PPI 20 soaked with Acryl
- DeliveryReady to ship within 15 working days
PRINT
Generic plate, coated with a rubber skin
CHF 44.85
PR0113.G
- Orientationneutral
- Model Typeintact
- DimensionsDimension: 250 x 250 x 5mm, Weight: 250g +/- 5%
- MaterialModified bone-like polyurethane coated with a rubber skin
- DeliveryReady to ship within 15 working days
PRINT
Generic plate, coated with a rubber skin
CHF 44.85
PR0114.G
- Orientationneutral
- Model Typeintact
- DimensionsDimension: 250 x 250 x 6mm, Weight: 300g +/- 5%
- MaterialModified bone-like polyurethane coated with a rubber skin
- DeliveryReady to ship within 15 working days
PRINT
Lumbar Spine vertebrae single set from L1 to L5
CHF 44.55
LSS9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
Lumbar Spine vertebrae single set from L1 to L5.
CHF 44.55
LD9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLD material: Low density solid foam
- DeliveryDelivery time upon request
PRINT
SYNBONE foam block series 20 PCF 35x60x50mm with cut and 12 pre drilled holes Ø1.5mm
CHF 45.30
0040-20-12
- Orientationneutral
- Model Typeintact
- DimensionsLength: 60mm, Width: 35mm, Height: 50mm, 12 holes: Ø 1.5mm
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183) Compressive strengths: 8-12 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 42PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 45.35
0040-42-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 41.82 PCF / 0.67 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 15-20 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 25 working days
PRINT
Cord Set for Knot Tying Workstation: Set of 25pcs, Thickness Ø2mm length 1200mm per/pcs
CHF 45.35
PR2111.25
- Orientationneutral
- Model Typeintact
- DimensionsPacked in a plastick bag: Length: 220mm Width: 160mm Height: 20mm 25 Cords: Ø: 2mm Length: 1200mm
- MaterialPolyester
- DeliveryReady to ship within 15 working days
PRINT
SYNBONE foam block series 50 PCF in defined dimensions
CHF 46.95
0040-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 20 PCF in defined dimensions
CHF 47.90
0040-20-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183), Compressive strength: 8-12 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
Generic block with 28 holes
CHF 47.50
PR1428
- Orientationneutral
- Model Typeintact
- DimensionsLength: 70mm, Width: 70mm, Height: 50mm, Density:0.2 Kg/dm3, 28 holes: Ø3.2mm deep 50mm
- MaterialPUR foam gray colour
- DeliveryReady to ship within 15 working days
PRINT
Thumb and Index Finger bed for an optimal hold of the model 9061.40. For repeated use. Bone model in not included in the sope of delivery.
CHF 53.55
9061.50
- Orientationneutral
- Model Typeintact
- DimensionsLength: 195mm Width: 80mm Height: 55mm
- MaterialSilicon
- DeliveryReady to ship within 15 working days
PRINT
Canine small Cervical Spine with occiput, vertebrae from C1 to C3
CHF 54.40
0719
- Orientationneutral
- Model Typeintact
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Lumbar Spine vertebrae single set from T10 to L5
CHF 54.90
LD9370.10
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from T10-L5
- MaterialLD material: Low density solid foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine vertebrae single set from T10 to L5
CHF 54.90
LSS9370.10
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from T10-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
Large lumbar Vertebra L4 and L5 with predrilled pedicle holes.
CHF 55.50
LDPR1716
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 85mm, Diameter of the pedicle holes: 5.5mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request