PRINT
SYNBONE foam block series 30 PCF in defined dimensions
CHF 13.20
0040-30-10
- Orientationneutral
- Model Typeintact
- Dimensions55mm x 45mm x 45mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 15 PCF in defined dimensions with a horizontal cut
CHF 18.30
0040-15-12
- Orientationneutral
- Model Typeintact
- Dimensions110mm x 40mm x 40mm, Cut Length: 70mm, Tolerances: +/-1.2mm
- MaterialPUR /materials properties: Density: 15 PCF / 0.24 g/cm3 (ISO 1183), Compressive strength:2-4 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 30 PCF in defined dimensions
CHF 19.15
0040-30-01
- Orientationneutral
- Model Typeintact
- Dimensions110mm x 110mm x 40mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 50 PCF in defined dimensions
CHF 20.05
0040-50-10
- Orientationneutral
- Model Typeintact
- Dimensions100mm x 100mm x 5mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 30 PCF in defined dimensions
CHF 24.65
0040-30-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
Lumbar Spine from T10 to Sacrum. Muscles not included
CHF 124.70
LD9370
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
SYNBONE foam block series 5 PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 26.70
0040-5-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 5 PCF / 0.08 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 0.7 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 8.7 PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 28.90
0040-8.7-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 8.7 PCF / 0.14 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 1.8-2 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 25 working days
PRINT
Partial hollow Skull left side with vise attachment, frontal sinus and maxillary sinuses
CHF 30.35
8800.L
- Orientationleft
- Model Typeintact
- DimensionsSkull width: 74mm. Length: 235mm. Height: 161mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Partial hollow Skull right side with vise attachment, frontal sinus and maxillary sinuses
CHF 30.35
8800.R
- Orientationright
- Model Typeintact
- DimensionsSkull width: 74mm. Length: 235mm. Height: 161mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
SYNBONE foam block series 15PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 33.10
0040-15-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 15 PCF / 0.24 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 2-4 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 25 working days
PRINT
SYNBONE foam block series 20 PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 34.95
0040-20-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 8-12 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 25 working days
PRINT
Lumbar Spine vertebrae single set from L1 to L5
CHF 44.55
LSS9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
Lumbar Spine vertebrae single set from L1 to L5.
CHF 44.55
LD9370.20
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from L1-L5
- MaterialLD material: Low density solid foam
- DeliveryDelivery time upon request
PRINT
SYNBONE foam block series 20 PCF 35x60x50mm with cut and 12 pre drilled holes Ø1.5mm
CHF 45.30
0040-20-12
- Orientationneutral
- Model Typeintact
- DimensionsLength: 60mm, Width: 35mm, Height: 50mm, 12 holes: Ø 1.5mm
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183) Compressive strengths: 8-12 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 42PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 45.35
0040-42-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 41.82 PCF / 0.67 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 15-20 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 25 working days
PRINT
Lumbar Spine vertebrae single set from T10 to L5
CHF 54.90
LSS9370.10
- Orientationneutral
- Model Typeintact
- DimensionsDifferent sizes from T10-L5
- MaterialLSS material with cancellous bone density
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum with lateral band
CHF 61.10
LD9377
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum
CHF 61.10
LD9377.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum with lateral band
CHF 61.10
LSS9377
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L3-L5 to Sacrum
CHF 61.10
LSS9377.01
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 235mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
SYNBONE foam block series 30 PCF in defined dimensions
CHF 63.80
0040-30-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
Lumbar Spine from L1 to Sacrum
CHF 79.90
LD9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Lumbar Spine from L1 to Sacrum
CHF 79.90
LSS9379
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request