PRINT
SYNBONE foam block series 50 PCF in defined dimensions
CHF 20.05
0040-50-10
- Orientationneutral
- Model Typeintact
- Dimensions100mm x 100mm x 5mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: Density: 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 40-45 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
Canine Cervical Spine bed for posterior access. Holds canine small cervical spines from occiput to C3. Spine model is not included in delivery.
CHF 22.25
0799.00
- Orientationneutral
- Model Typeintact
- MaterialPolyurethane elastomer
- DeliveryReady to ship within 15 working days
PRINT
SYNBONE foam block series 42 PCF in defined dimensions
CHF 22.85
0040-42-10
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 50mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density:41.82 PCF/0.67 g/cm3 (ISO 1183), Compressive strength:15-20 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 5 PCF in defined dimensions
CHF 22.35
0040-5-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 5 PCF / 0.08 g/cm3 (ISO 1183), Compressive strength: 0.7 MPa (ISO 604)
- DeliveryReady to ship within 15 working days
PRINT
Sacrum without central nerve canal
CHF 22.40
9410
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Sacrum without central nerve canal
CHF 22.40
LD9410
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam low density.
- DeliveryReady to ship within 15 working days
PRINT
Solid Sacrum without central nerve canal used for spine models
CHF 22.40
LD9470
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 113mm. Length: 110mm
- MaterialSolid foam low density.
- DeliveryReady to ship within 15 working days
PRINT
Solid Sacrum without central nerve canal used for Spine models
CHF 22.40
LSS9470
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 113mm. Length: 110mm
- MaterialSolid foam, LSS cancellous bone density
- DeliveryReady to ship within 15 working days
PRINT
SYNBONE foam block series 30 PCF in defined dimensions
CHF 24.65
0040-30-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
SYNBONE foam block series 42 PCF in defined dimensions
CHF 24.40
0040-42-01
- Orientationneutral
- Model Typeintact
- Dimensions110mm x 110mm x 40mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 41.82 PCF/0.67 g/cm3 (ISO 1183), Compressive strength:15-20 MPa (ISO 604)
- DeliveryReady to ship within 15 working days
PRINT
Generic bone with 4 oblique incomplete cuts
CHF 24.15
0063
- Orientationneutral
- Model Typecut
- DimensionsTube diameter 25mm. Canal diameter 9mm. Length: 400mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Generic bone with rubber band and 6 pre-drilled holes
CHF 24.15
0062
- Orientationneutral
- Model Typefractured, pre-drilled canal
- DimensionsTube diameter 25mm. Canal diameter 9mm. Length: 400mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Osteoporotic Generic bone
CHF 24.05
0080
- Orientationneutral
- Model Typeintact
- DimensionsLength: 380mm. Diameter: 25mm
- MaterialModified osteoporotic bone-like PUR
- DeliveryReady to ship within 15 working days
PRINT
Generic bone with single midline slit cut into both ends. Outer Ø 25mm and inner Ø 16mm
CHF 24.15
0056
- Orientationneutral
- Model Typecut
- DimensionsTube diameter: 25mm, Canal diameter: 16mm, Length: 400mm
- MaterialSolid foam
- DeliveryReady to ship within 10 working days
PRINT
Cervical Spine with occipital bone, vertebrae C1 to T1, sewable spinal cord with dura mater
CHF 123.10
LD9391.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: solid foam, C1 to T1: Solid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Pre-cut Mandible with pre-cut of angular mandibular fracture right & left with Easy Clip mechanism
CHF 25.60
8903
- Orientationneutral
- Model Typepre-fractured
- DimensionsMandible width: 115mm
- MaterialSolid foam
- DeliveryReady to ship within 15 working days
PRINT
Lumbar Spine from T10 to Sacrum. Muscles not included
CHF 124.70
LD9370
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
SYNBONE foam block series 5 PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 26.70
0040-5-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 5 PCF / 0.08 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 0.7 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 20 working days
PRINT
Intact Mandible with cancellous bone and Easy Clip mechanism
CHF 27.00
8950
- Orientationneutral
- Model Typeintact
- DimensionsMandible width: 115mm
- MaterialCortical / cancellous bone
- DeliveryReady to ship within 10 working days
PRINT
SYNBONE foam block series 8.7 PCF with 2nd layer of 3mm 50PCF on the top in defined dimensions
CHF 28.90
0040-8.7-50-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 53mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 8.7 PCF / 0.14 g/cm3; 50 PCF / 0.80 g/cm3 (ISO 1183), Compressive strength: 1.8-2 MPa; 40-45 MPa (ISO 604)
- DeliveryReady to ship within 25 working days
PRINT
Generic plate, coated with a rubber skin
CHF 28.55
PR1332.G
- Orientationneutral
- Model Typeintact
- Dimensions50 x 50 x 3mm. Weight tolerances: +/- 5%
- MaterialModified bone-like polyurethane coated with rubber Skin
- DeliveryReady to ship within 15 working days
PRINT
SYNBONE foam block series 42 PCF in defined dimensions
CHF 29.20
0040-42-11
- Orientationneutral
- Model Typeintact
- Dimensions200mm x 150mm x 6mm, Tolerances: +/-1.2mm
- MaterialPUR/materials properties: Density: 41.82 PCF/0.67 g/cm3 (ISO 1183), (ASTM 1622) Compressive strength:15-20 MPa (ISO 604) (ASTM-D 695)
- DeliveryReady to ship within 20 working days