Showing 25–48 of 1489 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
SYNMAN Compact case
Light weight SYNMAN compact stackable travel case with attachable trolley for easy transportation
PR1221.90
- Model Typeintact
- DimensionsLength: 560mm. Width: 500mm. Height: 260mm
- MaterialVarious materials
- DeliveryDelivery time upon request
PRINT
SYNMAN part set 8
Replacement parts for 8 participants, for evaluation purposes only
PR0624.51
- Model Typeintact
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
SYNMAN Compact part set 8
Replacement parts for 8 participants includes the following: 8 Cricoid, 8 Cricoid Skin, 2 chest pads, 4 chest skin, 4 right ribs, 4 left ribs and 8 rib skins
PR1221.51
- Model Typeintact
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Spine Navigation
Lumbar Spine L1- L5 with Spine holder, including navigations pin, Spine holder insert, Intervertebral Disk lg between L2-L3 and silicone Skin cover
PR1608
- Orientationneutral
- Model Typeintact
- DimensionsLength: 294mm. Width: 204mm. Height: 170mm
- MaterialVarious materials
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine Holder insert w/ cranial plate
Spine holder insert with cranial plate and pins
PR1608.10
- Orientationneutral
- Model Typeintact
- DimensionsLength: 262mm. Width: 140mm. Height: 113mm
- MaterialPolyamide
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine Holder for invasive navigation complete
Large Spine holder including Spine lg holder insert and navigations pin for large lumbar spine L1-Sacrum
PR1608.40
- Orientationneutral
- Model Typeintact
- DimensionsLength: 294mm. Width: 204mm. Height: 170mm
- MaterialVarious material
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
PR1704
- Orientationneutral
- Model Typeintact
- DimensionsLength: 230mm Width: 230mm Height: 208mm Clamping diameter: 30mm
- MaterialPOM; Alu; PUR
- DeliveryDelivery without Generic bone
PRINT
ROB Knee Holder System without transportation case
ROB Knee Holder System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left. In single use transportation packaging only.
0037.01
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System without transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In duffle bag transportation packaging
0037.05
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine Torso C1-L5 w/ Pelvis, Lenke 3 Scoliosis. Ribs, Muscles, Nerves soft tissue, skin. Incl X-ray
Spine Torso from C1-L5 with Pelvis, radiopaque coating, muscle multifidus, ribs, spinal nerves with soft tissue and skin
LD9362.FI
- Orientationneutral
- MaterialSpine and Pelvis: Solid foam low density, Disk: dense flexible foam, Soft Tissue: PU, Skin: PU
- DeliveryDelivery time upon request
PRINT
Spine Torso C1-L5 w/ Pelvis, Lenke 3 Scoliosis. Ribs, Muscle, Nerve, soft tissue, xray posterior exp
Spine Torso from C1-L5 with Pelvis, radiopaque coating, muscle multifidus, ribs, spinal nerves with soft tissue, skin and posterior exposure.
LD9362.11.FI
- Orientationneutral
- MaterialSpine and Pelvis: Solid foam low density, Disk: dense flexible foam, Soft Tissue: PU, Skin: PU
- DeliveryDelivery time upon request
PRINT
Spine Torso C1-L5 w/ Pelvis. Normal. Ribs, Muscles, Nerves w/ soft tissue a/ skin
Spine Torso from C1-L5 with Pelvis, radiopaque coating, muscle multifidus, ribs, spinal nerves with soft tissue and skin
LD9363.FI
- Orientationneutral
- MaterialSpine and Pelvis: Solid foam low density, Disk: dense flexible foam, Soft Tissue: PU, Skin: PU
- DeliveryDelivery time upon request
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL soft cortical a/ notch
Set of 24 pieces of left large knee with varus (3°-7°) assembled with soft cortical femur and tibia, with ligament balancing collateral ligaments, and slightly stretchy cruciate ligaments.
LS1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical soft density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS2016.36.NH.24
PRINT
Set (24 pcs)Knee large left varus ligament balance recon w/ LCL, MCL, PCL ACL hard cortical a/ notch
Set of 24 PCS of LSH1816.36.NH
LSH1816.36.NH.24
- Orientationleft
- Model Typeintact
- DimensionsCondylar width: 82mm. Tibia plateau width: 74mm. Canal diameter: Femur 12mm, Tibia 12mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Braided nylon & Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
ROB Knee Holder System with transportation case
ROB Knee Holder System for Arthroplasty workshops to hold the various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left and solid transportation case with foam inlays.
0037
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm Case: Length: 525mm, Width: 450mm, Height: 235mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder Rail System with transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In a solid transportation case with foam inlays.
0037.06
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 m, Case: length: 607 mm, width: 475 mm, depth: 275 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
CAD Leg Holder with Rail fixation System
Extremity holder for knee, ankle and full leg.
0037.C05
- Orientationneutral
- MaterialStainless steel with anodized aluminium and POM base
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. without transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.01
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Table Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Table Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp lig. bal. without transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing.
0036.05
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Pro Knee Holder System w/ Rail Clamp, lig. bal. a/ transportation case
ROB Pro Knee Holder System with Rail Clamp is designed for arthroplasty workshops. It holds SYNBONE knee models in adjustable positions for unicondylar, partial, primary, and revision procedures. Left-side setup, ligament balancing, case included.
0036.06
- Orientationleft
- MaterialHolder: Anodised aluminium, stainless steel, SLS DF-HST and other various materials Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Hemi-Thorax model right side
Right Hemi-Thorax model with replacement Ribs 3-8 and removable realistic Skin. Everything is protected by a storage box
PR1613.2
- Orientationright
- Model Typeintact
- DimensionsLength: 400mm, Width: 300mm, Height: 210mm, Height (without storage box): 150mm
- MaterialReplacement Ribs 3-8: Solid foam, Inner foam: Aveolux, Skin: silicone, Case: PVC
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Hip Holder System incl. transportation case
Hip Holder System with Hemi-Pelvis Clamp and Femur Sleeve Clamp. Designed for Total Hip Arthroplasty workshops and trainings. Delivered in a solid transportation case with foam inlays.
0031
- DimensionsHip Holder: Length: 245mm Width: 190mm Height: 301mm Case: Length: 525mm, Width: 450mm, Height: 235mm
- MaterialHolder: Aluminum transparent anodized Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 15 working days